3 Rings Reasonable Price Industrial Giant Wheel Use Traditional Slip Ring

Collector ring series of synchronous and asynchronous motor by using the electric motor in the ring, is widely used in industry, and most are operating in harsh conditions under the These motors although no DC motor as the reversing effect, but with the commutator as, set electric ring or brush of abnormal wear and vibration electric brush and spark and other ills. Special material brush from the point of view, collector ring brush not only the use of graphite brush, and in order to improve the electric current density, sometimes also the use of metal graphite brush, therefore, must also be taking into account factors such as residual abnormal expansion. Even for the high speed motor, such as turbine generator or motor running in the full closed gas medium and hydrogen media, the problem is also a lot of problems.

The material of the collector ring requires high mechanical strength and good conductor of electricity, but also has the corrosion resistance, in contact with the brush sliding, must have the wear resistance and stability of the sliding contact characteristics. In general, the wear resistance of the steel ring is good, and the mechanical strength is big, so it is mostly used for the synchronous motor which has a big difference in the wear difference of the collector ring due to the polarity.

In general, the wear resistance of the steel ring is good, and the mechanical strength is big, so it is mostly used for the synchronous motor which has a big difference in the wear difference of the collector ring due to the polarity. Steel can be processed into complex structures, it is a readily available and cheap materials, therefore, widely used in including low peripheral speed of turbine generator, synchronous motor. For the case of a turbine generator, the main emphasis is on the mechanical strength and wear resistance of the electric ring, and sometimes the use of forged steel. In addition, the requirements of corrosion resistance, the use of stainless steel, but the sliding properties of stainless steel is not stable, and brush combination is not suitable tend to make the brush beat, easy to cause the brush excessive temperature rise or abnormal wear, so when in use must be doubly pay attention to. Copper casting bronze set electric ring and steel collector ring compared, good sliding properties, so a wide range of uses, but when containing a large number of low melting point lead, because it is through electric heating and lead off phenomenon, easy to cause the collector ring wear brush or abnormal wear.

In the coordination of the electric brush and the electric brush, the brush is too strong and the material of the collecting ring is too soft. Especially the fully enclosed motor high temperature and low humidity, more likely to cause the brush or set wear rings. This is the form of the heavy elephant, the beginning of only a very small wound, the brush in these parts of the poor set of electric sparks. In the event of a spark, the wound becomes progressively worse, and finally forms the same size as the size of the brush sliding contact surface. Therefore, the electric brush can be noticed even if it produces a very small spark.

In order to prevent the occurrence of serious heavy like scars on the steel electric ring, the brush should be mentioned in the motor for a long time to stop. In order to improve the current distribution of the parallel electric brush, the power point of the sliding contact surface of the movable electric collecting ring can be moved. In order to obtain good sliding properties, a spiral in the collector ring slot is effective.

Packaging machinery electronic test equipment, medical equipment, rotary working table exhibition and display equipment manufacturing and processing control equipment robot technology military technology closed-circuit monitoring spherical Yuntai.

Technical Support:

1. Delivery time is 5-7 days for sample and 15 working days for the bulk order;

2. Strong production capacity and strictly quality contol system;

3. Payment condition: 30% before condition, 70% before delivery:

4. Your inquiry and problems related to our products will be replied in 24 hours;

5. Well-tained and experienced staffs to answer all you questions;

6. Payment: L/C, D/A, D/P, T/T, PAYPAL,WESTUNION,MONEYGRAM;

7. Delivery way: UPS, DHL, TNT, FEDEX, EMS, CHINAPOST

 After Sales Service

1.1year warranty for most of our products;

2.We will arrange delivery of the goods on time:

3.Within the warranty period, we will bear all the qulity problem of our produts;

4.Beyond the warranty period, we will despatch the replacement parts to help fix the products;

5.Without any problem, we will gain the feedbacks of our products to help improve better products.