Contact Platform Support
Help CenterHot Offer Tombar Thite Beneficiation Equipments
Related Products
-
China DSM Dressing Sorting MachineUS$ 1,000 - 200,000MOQ: 1 Set -
China DSM Dressing Pressure FilterUS$ 1,000 - 200,000MOQ: 1 Set
-
China DSM Dressing Mechanical Ball MillUS$ 1,000 - 200,000MOQ: 1 Set
-
China Placer Gold Concentrator / Gold Separator PriceUS$ 1,000 - 200,000MOQ: 1 Set
-
China DSM Dressing Magnetic CobberUS$ 1,000 - 200,000MOQ: 1 Set
Specifications
1 Tombar Thite Beneficiation Equipments2 Great processing ability
3 Certificate of ISO9001:2000/CE
Tombar Thite Beneficiation Equipments
Dashan mineral processing equipmen
Tombar Thite Beneficiation Equipments Specifications
Use: Widely used in tungsten, tin, gold, iron, lead, zinc, manganese metal jig dressing. easy to handle, small investment.
Tombar Thite Beneficiation Equipments Superiority:
On dump (8-30mm coarse ore) and under dump (0-8mm thin ore) at the same time continuous working characteristic. It has the edge, high recover, large treatment capacity, and continuous work.
Tombar Thite Beneficiation Equipments Use:
It has been applied to the selecting manganese ore, galena, hematite, limonite, hematite, mercury,lapis lazuli, barite ore, fluorite, and other minerals gravity separation. AM30 jig machine is used to the separation operation. It has a good result on the separate of big size raw ore and the recover of large non-ferrous metal smelting slag.
Tombar Thite Beneficiation Equipments Descriptions
Rectangle Compartment Side Way Action Type Jig has two types. One is left compartment side way jig, another is right compartment side way jig. The jig has fixed screen. It is available in separating metallic ores, such as tungsten and gold placer deposits as well as beneficiated tin ore, which not only can be separated fine materials, but coarse also. The largest feed size is 6-8mm but it can be 12mm in few cases.
Rectangle Compartment Side Way Action Type Jig is mainly composed of jig box, drive device, water distribution, diaphragm and bibcock. There are two jig buckets with different sizes and each diaphragm is divided into jig area and diaphragm area by clapboard. The rubber diaphragm pumping to make medium (water) moving is the jigging course. The triangle belt drives big belt pulley by electromotor so connecting rod of the eccentric gear and rocker are up and down moving. Another connecting rod is connected with the rubber diaphragm which is moving up and down to jig.
Based on the size of ore, we can change the stroke of connecting rod and choose different stroke to make the best jigging effect. The method of altering stroke per minute is to exchange a smaller belt pulley but there are two strokes per minute: 322r/m; 420r/m. The method of choosing stroke is to loose bolt and screw cap, take out bowel and move the relative place between eccentric adjusting sieve and eccentric shaft so there are 11 different strokes (0-25.3mm).
Because of a sieve added on the working screen, the jig can be processed the uneven sizes of material. (note: the sieve can be requested to supply or not). After the feed ores are sent to jig chamber, the ores are separated to different layers in the medium by the pulsation of diaphragm. The light but weight is sank to the tank of jig bucket through the spaces of materials of artificial bed layer and its sieve holes but the coarse but light is washed to the discharge end of screen by medium. Because the back jig chamber is lower 50mm than front jig chamber, the light ores is overflowed through front jig chamber to the back chamber and jigged again. If needed, the place of end plate can be adjusted to control the discharge amount. The concentrate in tank can be discharged by discharge tube regularly.
Tombar Thite Beneficiation Equipments
[url=/Iron-Separator.html]Iron Separator[/url]
[url=/Magnetic-Filters.html]Magnetic Drum Separators[/url]
[url=/Magnetic-Filters.html]Magnetic Equipments[/url]
Send Inquiry to This Supplier
You May Also Like
-
3R2615 Raymond Mill for Limestone, Calcite, Gypsum Powder Processing - 80-325 Mesh, 1-5t/h, Energy-SavingUS$ 7200MOQ: 1 Set
-
6t/h High Output Fluorite Ore Grinder HCM HCH Ring Roller Mill 325 Mesh D95 Fineness Industrial PulverizerNegotiableMOQ: 1 Combo
-
Ball Mill Jar With Capacity of 0.56-130TPH and ISO9001:2008 CertificateNegotiableMOQ: 1 Set
-
Mineral Gold Ore Copper Ore Complete Chrome Ore Processing Line for AlbaniaUS$ 10,000 - 1,000,000MOQ: 1 Set
-
Wet Pan Mill for Sudan Gold Mining Plant, Wet Pan Grinding Mill for SaleUS$ 3,000 - 15,000MOQ: 1 Set
-
Professional Coal Grinding MachineUS$ 1,900 - 3,500MOQ: 1 Piece
-
KMJ02-05 Stone Grinding Ball MachineNegotiableMOQ: 1 Unit
-
Zirconia Ball Mill Grinding MediaUS$ 5,000 - 60,000MOQ: 1 Set
-
2016 New Type Top Quality Impact Stone Crusher Machine for SaleUS$ 1,000 - 1,000MOQ: 1 Set
-
Vertical Roller MillUS$ 40,000 - 150,000MOQ: 1 Set
