Contact Platform Support
Help CenterTFR7800W High Output Level Optical Receiver
Related Products
-
TON6800K Advanced ATT-pad Adjustment Technique Optical NodeNegotiableMOQ: 1 Set -
TON6800K 1G AGC Optical NodeNegotiableMOQ: 1 Set
-
TON6800K 1000MHz AGC Optical NodeNegotiableMOQ: 1 Set
-
TFR7800Nc AGC Optical ReceiverNegotiableMOQ: 1 Set
-
TFR7800Nc AGC Optical Receiver(with SNMP)NegotiableMOQ: 1 Set
Specifications
power range is at 1~ -6dBmsingle output level up to 108dBuV
GaAs output amplify module
Optical AGC,SNMP
1 or 2 output ports
tures
- Perfect surge suppression circuit, improved the anti-thunder stroke and surge impact prevention ability
- The input stage adopt imported low noise GaAs amplifier, the output stage adopt imported CATV GaAs high performance module, improved C/N and the non-line distortion characteristic greatly, simultaneously reduced the power consumption
- Strict reliability test, MTBF is longer than 100,000 hours
- Excellent optic detector: responsibility > 0.9 A/W, light alarm instructions when input power too low
- RF output level and slope are adjustable. Output port 1-2 are available, tap/splitt are available.
- Reserve international standard network interface, easy to field upgrade
- Optical AGC function,the output level changed within ±0.5dB, while input power changed at +1dBm~-6dBm
Brief
TFR7800W optical receiver can be used for CATV network, digital network and telecom network, especially suitable for optical fiber extends to the building, connect to subscriber’s home directly.
TFR7800W Optical receiver power range is at 1~ -6dBm. When receiver input power at 0dBm, and dual outputs, each RF output level up to 104dBuV; single output level up to 108dBuV; when optical receiver power at -5dBm, C/N > 49dB.
~220V power-supply modes are available, the high-performance transforms circuit become + 24V, + 5V straight to optical receiver internal devices.
Technique Parameter
Project |
Unit |
Performance |
note |
||
Optic |
wavelength |
nm |
1290~1560 |
|
|
Optical connectors |
|
FC/APC or SC/APC |
|
||
Input power range |
dBm |
1~-6 |
|
||
Input power indicate voltage |
mW/V |
1.0±10% |
|
||
RF |
Frequency range |
MHz |
47~860 |
|
|
Flatness |
dB |
±0.75 |
|
||
RF ports number |
|
1~2 |
Tap/split output are available |
||
Standard output power(at input power 1~ -6dBm) |
dBuV |
108 |
Single output |
||
104 |
Double output |
||||
Impedance |
Ω |
75 |
|
||
Gain adjusting range |
dB |
0~20 |
Adjustable continuously |
||
Slope adjusting range * |
dB |
0~18 |
1dB step |
||
Output return loss |
dB |
>16 |
860MHz bandwidth range |
||
Link |
C/N |
dB |
>50 |
Optical receiver power at-3dBm,single output power at 104dBuV |
|
CTB |
dBc |
>65 |
|||
CSO |
dBc |
>62 |
|||
General |
Dimension |
mm |
170×138×46 |
|
|
voltage |
Vac |
220 |
|
||
Power Consumption |
VA |
<15 |
|
||
working temperature |
°C |
-25~+55 |
|
||
Storage temperature |
°C |
-25~+65 |
|
||
Weight |
Kg |
0.5 |
|
||
note: *means Pre-EQ is 4dB, example; EQ plug is 5 dB , then output EQ 4 + 5 = 9 dB | |||||
Send Inquiry to This Supplier
You May Also Like
-
Patch AntennaNegotiableMOQ: 2600 Pieces
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
Low Pim -150dBc 10dB Power Tapper 800-2700MHz N Type,US$ 3 - 15MOQ: 5 Pieces
-
698-2700MHz 3 in 1 Out RF Hybrid Combiner Coupler n Female 50 OhmNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
Fujikura/Sumitomo Original Replacement Blade/Cutting Wheel for FC-6S, FC-7, CT-30 Fiber CleaversUS$ 50 - 130MOQ: 1 Piece
-
Professional Manufacture Direct for Metal and Plastic Electronic FaceplateUS$ 0.06 - 0.16MOQ: 500 Pieces
