Contact Platform Support
Help CenterFull Automatic PET Stretch Blow Moulding Machine
Related Products
-
High Capacity Automatic Plastic Bottle ManufacturerUS$ 15,000 - 36,000MOQ: 1 Set -
Automatic PET Bottle Blowing Making MachineUS$ 15,000 - 36,000MOQ: 1 Set
-
2015 Semi-automatic Bottle Blowing Machine / BlowerUS$ 12,000 - 25,000MOQ: 1 Set
-
2015 Semi-automatic PET Bottle Manufacturing Machine / Making MachineUS$ 12,000 - 25,000MOQ: 1 Set
-
Plastic Pet Bottle ManufacturersUS$ 12,000 - 25,000MOQ: 1 Set
Full Automatic PET Stretch Blow Moulding Machine
Introductioin:
KM-A4 Full automatic blow moulding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low costhigh efficiencyeasy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to installtest and start up.
14). Low rejection rate: Less than 0.2 percent.
Technical Parameter:
| Model | KM-A4 Automatic blow molding machine | |
| Productivity | Depend on bottle design | 3200-4000PCS/H |
| Product type | Body diameter | 20mm-100mm |
| Height | 50mm-350mm | |
| Neck diameter | 15mm-38mm | |
| Mold | Cavity | 4cavities |
| Mold thick | 240mm | |
| Mold | 500*500mm | |
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power | 49kw | |
| Really use power | 14kw | |
| Air source | LP air compressor | 1.6m3/min 1.0MPa 1set (15KW) |
| HP air compressor | 1.0m3/min 3.0MPa 2sets (each set 11KW) | |
| Air dryer | 2.0m3/min 3.0MPa 1set | |
| Cooling water | Cooling water | 15L/min |
| Size | L*W*H | 1908*1858*1920mm |
| Weight | 3600kg | |
| preform unscrambler | L*W*H | 2000*950*2480mm |
| Weight | 250kg | |
| Resin available | PET | |
Photos :
Full Automatic PET Stretch Blow Moulding Machine
Flow chart :
Product :(PET BOTTLE)
Full Automatic PET Stretch Blow Moulding Machine
Q1:Are you a trading company or a manufactory?
A1:We are a manufactory,can give u best service .
Q2:What’s your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with 2 years guarantee . we will give u spare part free in 2 years
Q3:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.
Q4:How can I install my machine when it arrives?
A4:We will send our engineer to your side as soon as you get all your machines ready , for testing and teaching your technicians how to run the machines.
Q5:How about the spare parts?
A5:After we deal down all the things , we will offer you a spare parts list for your reference.
Any questions about our machine and company,please be free to contact with me at any time.Also,we welcome you to visit our factoy by yourself!!
Send Inquiry to This Supplier
You May Also Like
-
Cheapest Automatic Bottle Blowing Machine Prices/factory Price Automatic Bottle Shrink Wrapping MachineUS$ 5,000 - 80,000MOQ: 1 Set
-
Hot Top Performance EPS Automatic Vacuum Block Molding MachineUS$ 1,000 - 50,000MOQ: 1 Set
-
Hot Sale Polyethylene Plastic Film Blowing Machine PriceUS$ 33,000 - 33,000MOQ: 1 Set
-
30 PET Bottle Blowing Machines for Sale +86 15136240765US$ 48,457 - 105,000MOQ: 1 Set
-
Industrial Plastic Bottle Blowing MachineUS$ 4,566 - 7,899MOQ: 1 Set
-
Machine for Blowing High Barrier Film/film Making-lineNegotiableMOQ: 1 Set
-
Automatic Mineral Water PET Bottle Blow Molding MachineUS$ 10,000 - 38,500MOQ: 1 Set
-
XK-BM01 Blow Molding Machine and MoldNegotiableMOQ: 1 Set
-
Series of DW Laser CutterUS$ 6,000 - 9,999MOQ: 1 Piece
-
Small Plastic Film Blowing Machine, Lab Blown Film Equipment, Mini Type Blown Film MachineUS$ 8000 - 11000MOQ: 1 Set
