DDSY794 Type Single Phase Electronic Prepaid Energy Meter

Specifications

Prepaid Energy Meter
1)Good quality&best price
2)Simple structure,high reliability
3)Factory supply
4)Easy intallation

 

Introduction

DDSY794 Type Single-Phase Electronic Prepaid Energy Meter adopts microelectronic technology and comply with technical requirements for single phase electronic watt-hour meter stipulated in GB/T 17215.321-2008 and GB/T18460-2001. It apopts fully shielded, fully sealed structure and uses advance SCM processing systems for data collection, process and preservation...It also features good resistance to electromagnetic interference, low self-consumption of energy-saving, high accuracy, without calibration, burglar-proof electricity, high overload and long life etc...Meanwhile it provides fully functional managements software system of selling power.

Functions and features

1)Active single-phase electric power metering. No subject to adjust in terms of long working.
2)One card for only one user, well protected from forgery
3)One the remaining electric power quality is approching the alarming power quality, the digital tube should be lighted to remind user of timely purchasing;
4)One the electric consumption available is out, it should be cut-off automatically;
5)Protect from power theft, and record the information automatically;
6)Auto cut off for overload, Data-copying function make the electricity department easier to manage;
7)Adopt high reliability and long life electronic component, so the meter assume feature of high reliability and long life.
8)The IC card power selling control system has compelete function of power selling using spervision 
 

Feature and Benefit
Plug and play communication module
Build-in connect/disconnect latching relay
Remote/local firmware update
DLMS/COSEM compliance
Anti-tamper feature

Specification
Measurement
Class1.0/class B for active energy
Class 2.0/class A for reactive energy
With IEC 62052-11, IEC 62053-21, IEC 62053-23 and EN50470-1/3

Measured Value
Import and export energy (active and reactive)
Instantaneous voltage/current/active power/reactive power/frequency
Power factor (or phase anger)
Maximum demand (optional)

Current
Current range: 5/100A, 10/120A
Short time over current: 30 times Imax for 0.5 cycles
Burden: <0.02VA/phase @Ib

Voltage & Power Supply
Nominal voltage: 120V, 220V or 230V
Burden: <10VA/phase@ Un, 2W
Rated frequency range: 50Hz or 60Hz

Disconnection/Connection
Maximum switching voltage: 400 V Ac
Maximum switching current: 120 A
Maximum switching power: 48 kW

Environment
Operating temperature: -25° C to +70° C
Storage temperature: -40° C to +85° C
Relative humidity: ≤ 95%, non-condensing
Ingress protection: IP54 (without suction)


Security
Three-level security password protection
Cover open detection
Data encryption(optional)

Communication
Optical port according to IEC 62056-21 Mode C/E
RS485 and/or RS232
PLC(G3/PRIME), Zigbee and/or GPRS module

Protocol
IEC62056 - DLMS/COSEM

 

 

 

single phase energy meter

Feature and Benefit
Plug and play communication module
Build-in connect/disconnect latching relay
Remote/local firmware update
DLMS/COSEM compliance
Anti-tamper feature

Specification
Measurement
Class1.0/class B for active energy
Class 2.0/class A for reactive energy
With IEC 62052-11, IEC 62053-21, IEC 62053-23 and EN50470-1/3

Measured Value
Import and export energy (active and reactive)
Instantaneous voltage/current/active power/reactive power/frequency
Power factor (or phase anger)
Maximum demand (optional)

Current
Current range: 5/100A, 10/120A
Short time over current: 30 times Imax for 0.5 cycles
Burden: <0.02VA/phase @Ib

Voltage & Power Supply
Nominal voltage: 120V, 220V or 230V
Burden: <10VA/phase@ Un, 2W
Rated frequency range: 50Hz or 60Hz

Disconnection/Connection
Maximum switching voltage: 400 V Ac
Maximum switching current: 120 A
Maximum switching power: 48 kW

Environment
Operating temperature: -25° C to +70° C
Storage temperature: -40° C to +85° C
Relative humidity: ≤ 95%, non-condensing
Ingress protection: IP54 (without suction)


Security

Three-level security password protection
Cover open detection
Data encryption(optional)

Communication
Optical port according to IEC 62056-21 Mode C/E
RS485 and/or RS232
PLC(G3/PRIME), Zigbee and/or GPRS module

Protocol
IEC62056 - DLMS/COSEM