Contact Platform Support
Help Centerrf Pcs Repeaterhot Sale Signal Booter Single Band Mobile Signal Repeater
Related Products
-
Full Bar Mobile Signal Repeater Pcs 2g Signal Repeater Wireless AmplifierUS$ 1 - 50MOQ: 5 Pieces -
Factory Sale Good Price Pcs 1900mhz 2g Cell Phone Signal Booster Mobile Phone Signal RepeaterUS$ 1 - 50MOQ: 5 Pieces
-
Hotsales Best Price 1900mhz Pcs Mobile Phone Signals Booster 2g RepeaterUS$ 1 - 50MOQ: 5 Pieces
-
Lintratek Brand Mobile Signal Booster Single Band 1900mhz Pcs Network Solution RepeaterUS$ 1 - 50MOQ: 5 Pieces
-
Cell Phone Signal Amplifier Pcs 2g 3g Repeater 850/1900 Dual Band Signal RepeaterUS$ 1 - 40MOQ: 5 Pieces
Specifications
Factory 1900MHz PCS Mobile Signal repeater1:Cover about 200-500 sqm without block
2:Output Power: 17dbm
3.65dBi gain
rf pcs repeaterhot sale signal booter single band mobile signal repeater
1.High quality,competitive price
2.With CE,ISO,RoHs certification
3.Quality warranty:2 years
Why do you need to buy repeater/booster?
Product specification you should care:
| Model No | KW17A-PCS | ||
| Parameter data | Uplink | Downlink | |
| Frequency Range | PCS | 1850~1910 MHz | 1930 ~ 1990MHz |
| Output Power | 10 ±2dBm | 17 ±2dBm | |
| Gain | 60 ±2 dB | 65±2dB | |
| Bandwidth | 60M | ||
| Ripple in Band | PCS≤6dB | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| Intermodulation Products | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| VSWR | ≤3 | ||
| MTBF | >50000 hours | ||
| Power Supply | AC:100~240V, 50/ 60Hz;DC:5V 1A | ||
| Power Comsumption | < 3W | ||
| Impedance | 50 ohm | ||
| Mechanical Specification | |||
| RF Connector | N-Female N | ||
| Dimensions (D*W*H ) | 140*95*30(mm) | ||
| Cooling | Heatsink Convection cooling | ||
| Net weight | < 0.45Kg | ||
| Packing size (D*W*H ) | 250*240*65(mm) | ||
| Gross weight | < 0.7Kg | ||
| Installation Type | Wall Installation | ||
| Environment Conditions | IP40 | ||
| Humidity | < 90% | ||
| Operating Temperature | -10 °C ~ 55°C | ||
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
step 4: Mount your indoor antenna with signal repeater
step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Mobile repeater packing photo(eg):
Send Inquiry to This Supplier
You May Also Like
-
Lintratek Brand Booster PCS Network GSM1900 Cellphone Signal Repeater Made in ChinaNegotiableMOQ: 10 Pieces
-
For Aemrica Single Band1900MHz Signal Repeater for PCS Cell Phone Signal Amplifier Mobile Signal BoosterUS$ 1 - 70MOQ: 1 Set
-
1900mhz Gsm Mobile Phone Signal Booster,1900 Repeater Home Office PCS Cell Phone Signal AmplifierUS$ 1 - 60MOQ: 5 Sets
-
Lintratek PCS1900 Single Band Led Phone Repeater With AGCUS$ 1 - 100MOQ: 5 Pieces
-
Lintratek PCS1900 Single Band Wifi Phone Repeater With AGCUS$ 1 - 100MOQ: 5 Pieces
-
New Wideband PCS1900mhz Single Band Pico Phone Repeater With CE,ISOUS$ 1 - 1,000MOQ: 5 Pieces
-
New Wideband PCS1900mhz Single Band rf Phone Repeater With CE,ISOUS$ 1 - 1,000MOQ: 5 Pieces
-
1900mhz Pcs 90dB 40dBm Repeater Large Coverage Mobile Signal Amplifier for Outdoor UseUS$ 1 - 1,000MOQ: 5 Pieces
-
Wideband PCS1900mhz Single Band Wifi Phone Repeater With CE,ISOUS$ 1 - 1,000MOQ: 5 Pieces
-
Mobile Signal Booster Single Band 1900mhz Pcs Network Solution RepeaterNegotiableMOQ: 3 Pieces
