Contact Platform Support
Help CenterCover 200-600sqm Mobile Signal Repeater,pcs Signal Booster With ALC,cell Phone Signal Booster
Related Products
-
Made in China Mobile Signal Repeater,pcs Signal Repeater With ALC,cell Phone Signal BoosterNegotiableMOQ: 5 Pieces -
Lcd Screen Mobile Signal Repeater,pcs Signal Repeater With ALC,cell Phone Signal BoosterNegotiableMOQ: 5 Pieces
-
Lcd Screen Mobile Signal Repeater,pcs Signal Repeater With ALCNegotiableMOQ: 5 Pieces
-
China Golden Supplier Full Cell Signal Repeater 1900mhz Pcs Cell Phone Signal Booster/amplifier 65dbiNegotiableMOQ: 5 Pieces
-
Direct Factory Supply Network Coverage PCS Repeater 1900mhz Indoor Cell Phone Booster 200-300sqm CoverageNegotiableMOQ: 5 Pieces
Cover 200-600sqm mobile signal repeater,pcs signal booster with ALC,cell phone signal booster
1.LCD display,easy to know the signal good or bad
2.Certificate:CE,ROHS,ISO
3.Quality warranty:2 years
Why do you need to buy repeater/booster?
Specification should care about :
| Parameter data | Uplink | Downlink | |
| Frequency Range | GSM | 1710~1910MHz | 1930~1990MHz |
| Output Power | 17 ±2dBm | 20 ±2dBm | |
| Gain | 65 dB | 70 dB | |
| Bandwidth | 25M | ||
| Ripple in Band | GSM≤6dB | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36 dBm | |
| 1GHz~12.75GHz | ≤ -30 dBm | ||
| Noise Figure @ max. gain | ≤ 6 dB | ||
| VSWR | ≤3 | ||
| MTBF | >50000 hours | ||
| Power Supply | AC:100~240V, 50/ 60Hz;DC:5V 1A | ||
| Power Comsumption | < 5W | ||
| Impedance | 50 ohm | ||
| Mechanical Specification | |||
| RF Connector | N-Female N | ||
| Cooling | Heatsink Convection cooling | ||
| Dimensions (D x W xH ) | 135*105*26(mm) | ||
| Weight | < 0.9Kg | ||
| Installation Type | Wall Installation | ||
| Environment Conditions | IP40 | ||
| Humidity | < 90% | ||
| Operating Temperature | -10°C ~ 55°C | ||
How should you install repeater (very easy and simple):
Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).
Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.
Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.
step 4: Mount your indoor antenna with signal repeater
step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.
Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.
Indoor and outdoor antenna must be separated by wall.
Mobile repeater packing photo:
Send Inquiry to This Supplier
You May Also Like
-
Pico 1900mhz Repeater Signal Transmitter Home Cover Single Band PCS Network Mobile Signal BoosterNegotiableMOQ: 5 Pieces
-
Lintratek Brand Indoor Signal Bridge Lcd Display 1900mhz PCS Mobile Cellular Signal Repeater/AmplifierUS$ 1 - 50MOQ: 5 Pieces
-
Factory Supply OEM/ODM PCS Signal Repeater 1900 Mhz Cell Phone Mobile Signal BoosterNegotiableMOQ: 1 Piece
-
Suburban Area Use Good Signal Receiver 1900mhz Frequency Pcs Repeater for Mobile PhoneNegotiableMOQ: 1 Piece
-
Mobile Signal Extender 1900mhz Signal Transmitter Mobile Signal Booster PCS 1900 Repeater Mobile Signal AmplifierNegotiableMOQ: 1 Piece
-
Real Factory Price Mobile Network Booster PCS 1900mhz Signal Amplifier Mobile Signal BoosterUS$ 1 - 42MOQ: 5 Pieces
-
Network PCS Repeater,Boosters, Amplifier 1900 MHZ Signal,Mobile/Cell Phone BoosterUS$ 1 - 100MOQ: 5 Pieces
-
Signal Booster Metro Pcs Phones Home Signal Repeater Phone Signal BoosterUS$ 1 - 46MOQ: 5 Pieces
-
Lintratek Brand Signal Booster Metro Pcs Mobile Repeater Phone Signal BoosterUS$ 1 - 40MOQ: 10 Pieces
-
Mobile Signal Extender ,PCS1900mhz Signal Transmitter, Mobile Signal Booster PCS 1900 Repeater, Mobile Signal AmplifierNegotiableMOQ: 5 Pieces
