P10 P12 RGB tri-color mobile outdoor led display

Specifications

outdoor led display
1. Perfect image quality
2. High resolution
3. Unique structure design
4. Extreme viewing angle

outdoor led display

features

LED display makes an innovation which gives people a new conception in advertising industry. AS a leading manufacturer for LED billboard since its setup, LAMP owns rich experiences on local and overseas LED display engineering, which ensures a power, cost-effective advertising solution providing. With the help of our professional controlling software, LED display can be controlled anywhere through the Internet.

 

1.Weather resistance:

IP65 rating delivers best waterproof effect that ensures our product's stable broadcasting in harshest weather condition.

 

2.World-class image quality:

Strict system control and pixel to pixel correction make the image smooth and uniformity.

 

3.System flexibility:

Able to show a variety of content of video, animation, graphic and so on.

 

4.Service facility:

Modular design makes module individual and can fix easily without affecting others.

 

Specification

 

Pixel Pitch:	10 mm	12 mm
Pixel Density:	10000 pixels/sqm	6944 pixels/sqm
Pixel Configuration:	SMD 3 in 1	SMD 3 in 1
Module Dimension:	160*160 mm	192*192 mm
Module Resolution:	16*16 pixels	16*16 pixels
Cabinets Dimension:	800*640 mm	768*768 mm
Cabinets Resolution:	80*64 pixels	64*64 pixels
Brightness:	1800 cd/sqm	1600 cd/sqm
Best Viewing Distance:	> 10m	> 12m
Average Consumption:	320 W/sqm	240 W/sqm
Max Consumption:	800 W/sqm	600 W/sqm
Viewing Angle:	Horizontal angle: 140 degree Vertical angle: 140 degree
Processing:	12 bit
Ingress Protection:	IP20
Refresh Rate:	300 to 4800Hz
LED lifetime:	100,000 hours
Input Voltage:	90 to 260VAC, 50/60Hz
Operation Humidity:	10% to 99%

 

Related products

       

 

LED display installation steps:

1.   Assemble the cabinets on the structure.

2.   Connect the UTP cables between cabinets.

3.   Connect the AC cables between cabinets.

4.   Install Sending Card.

5.   Connect the DVI cable between Sending Card and Graphic   Card.

6.   Connect the COM cable between Sending card and   computer.

7.   Connect the UTP cables between Sending Card and Receiving Card.

8.   Turn on control computer.

9.     Install LED studio software (see attached CD and serial number is 888888)

10.   Turn on LED display.

11.   Set the display mode in “clone mode” in the window of Graphic Card properties.

12.   Use the LED studio to control the display.