LP-E-K50II(2) mobile led display

Specifications

1) Competitive price
2) Unique design structure
3) Rich engineering experience
4) CE & ROHS certification
5) cost saving

LP-E-K50II(2) led display features: 

 

1, High brightness and be adjustable. Built-in functional card support brightness automatically adjustment.

 

2, a turn-key solution including professional sports software and hardware.

 

3, rich advertising  LED display engineering experience both in domestic and oversea market.

 

4, Unbeatable product stability through strict Quality Control System.

 

 

LP-E-K50II(2) led display specification:

 

 

Pixel Pitch:	16 mm
Pixel Density:	3906 pixels/sqm
Pixel Configuration:	1R1G1B
Module Dimension:	256*128 mm
Module Resolution:	16*8 pixels
Cabinets Dimension:	1024*768 mm
Cabinets Resolution:	64*48 pixels
Brightness:	7500 cd/sqm
Best Viewing Distance:	> 16m
Average Consumption:	450 W/sqm
Max Consumption:	900 W/sqm
Viewing Angle:	Horizontal angle: 120 degree; Vertical angle: 60 degree
Processing:	12 bit
Ingress Protection:	Front IP65; Rear IP54
Refresh Rate:	300 to   4800Hz
LED lifetime:	100,000 hours
Input Voltage:	90 to 260VAC, 50/60Hz
Operation Humidity:	10% to 99%

 

 

system diagram:

 

 

 

 

LED display installation steps:

1.   Assemble the cabinets on the structure.

2.   Connect the UTP cables between cabinets.

3.   Connect the AC cables between cabinets.

4.   Install Sending Card.

5.   Connect the DVI cable between Sending Card and Graphic   Card.

6.   Connect the COM cable between Sending card and   computer.

7.   Connect the UTP cables between Sending Card and Receiving Card.

8.   Turn on control computer.

9.    Install LED studio software (see attached CD and serial number is 888888)

10.   Turn on LED display.

11.   Set the display mode in “clone mode” in the window of Graphic Card properties.

12.   Use the LED studio to control the display.