Contact Platform Support
Help CenterYiMing Pvc Plastic Welding Machine With Tube Fittings Casting for Plastic Pipe Machine
Related Products
-
YiMing pe Pipe Electrofusion Plastic Low Cost Welding MachineUS$ 1 - 3MOQ: 1 Piece -
YiMing pe Pipe Electrofusion Welding Machine Hot Sale Welding MachineUS$ 1 - 3MOQ: 1 Piece
-
YiMing Pvc Pipe Workshop Welding MachineUS$ 1 - 3MOQ: 1 Piece
-
YiMing Pvc Plastic Welding Machine With Tube Fittings CastingUS$ 1 - 3MOQ: 1 Piece
-
YiMing pe Pipe Electrofusion Welding MachineUS$ 1 - 3MOQ: 1 Piece
PPR Hot melt machine, hot melt glue machine,coating machine,casting,labeling machine,adhesive coating machine,Welding Diameter 20-32MM,Working temperature 0-300°C,Apply die head,Power on, Fusion pipes.
Product attributes:
External diameter |
Heat depth |
Heating time |
Process time |
Cool time |
20 |
14 |
5 |
4 |
3 |
25 |
16 |
7 |
4 |
3 |
132 |
20 |
8 |
4 |
4 |
40 |
21 |
12 |
6 |
4 |
50 |
22.5 |
18 |
6 |
5 |
63 |
24 |
24 |
6 |
6 |
How to use:
1,Fixed fusion splicer installed heating end, the fusion splicer placed on shelves, according to the heating pipe specifications required to install the corresponding die head, and Allen wrench tight, generally small in the front.
2,Put through power supply, the green light is lit, the red light goes out, said fusion splicer into automatic control state, can start operation.Note in the state of automatic temperature control, alternating red light green light will be lit by oneself, this shows that fusion splicer under control, does not affect the operation.
3,In the vertical pipe cutter to cut off the pipe material, pipe and pipe fittings at the same time without rotating promote fusion splicer die head, and operate according to the requirements of the table below, reach the heating time immediately after the pipes and pipe fittings from the die head and at the same time, rapidly without rotating linear homogeneous insert to the required depth, to form a uniform flange joint.
1, This product uses single phase three pole safety flat plug, the user may not changes the plugs, when used must be ground socket handle plugs.
2, In use process, hand and combustible cannot reach the fused hot piece of parts so as to avoid accidents.
3, Non-professional personnel products shall not be opened, and failure in safety performance of the instrument.
4, Such as the red light for a long time not jump, apparatus has malfunction, should immediately stop work, and cut off power supply.
5, Welding temperature has been adjusted when delivery from factory, non-professional personnel shall not be adjusted freely, so as not to affect the normal use of fusion splicer and life.
If you want to know more information about our factory products,welcome to contact us and visit our factory in anytime.
Send Inquiry to This Supplier
You May Also Like
-
Plastic Pipe Heat Fusion MachineUS$ 8MOQ: 50 Boxes
-
DENOH HW230 Engine Welding MachineUS$ 2400 - 2850MOQ: 1 Unit
-
High Speed Precision Industrial Pipe Welding Production LineUS$ 14800 - 296300MOQ: 1 Set
-
Filter Mesh Welding EquipmentUS$ 50,000 - 80,000MOQ: 1 Set
-
YiMing Pvc Plastic Welding Machine With Tube Fittings Casting for Plastic Pipe MachineUS$ 1 - 3MOQ: 1 Piece
-
Sell Sensor and Formed BellowsNegotiableMOQ: 1 Piece
-
Supply 50-160mm pe Pipe Butt Fusion Welding MachineUS$ 1,500 - 2,000MOQ: 1 Set
-
Automatic Welding MachineUS$ 15,000 - 25,000MOQ: 1 Set
-
Sell Pipe Cutting Plasma MachineUS$ 50,000 - 120,000MOQ: 1 Set
-
Shear WelderUS$ 4,444 - 77,777MOQ: 1 Set
