TCJ310 4-Shaft Vacuum Extruder

Specifications

This machine is used to produce all kinds of ceramic bricks,such as for floor,wall,roof etc.It must be runs with a vacuum pump.

The Instructions:

TCJ310 Four-Shaft Vacuum Extruder is used to produce ceramic rollor bars, electric porclains, floor and wall tiles(split tiles), load and unload hollow bricks, refractory materials, draiage rubes, waste water rubes, roofing tiles and others special shaped wares by plastic extrudin and forming the clay. It must be runs with a vacuum pump. The extruding screw of it is easy to be removed, it is also fit for other different extruding products.

 

The Main Technical Parameters:

Capacity: about 3t/h

Rotation speed of upper shaft: 32.5rpm(adjustable)

Rotation speed of under shaft: 21.4rpm(adjustable)

Diameter of pug extruding screw: Φ310mm

Pressure of pug extruding: ≥5MPa

Pressure of air-operated clutch working: 0.5-0.8MPa

Moisture content of material: 16-21%

Upper motor power: 37kw

Under motor power: 75kw

Vacuum degree: -0.094MPa

Overall size: about 6000×1700×1800mm

Net weight: 1200kg