outdoor single mode/multimode figure 8 GYXTC8S aerial fiber optic cables

Specifications

outdoor single mode/multimode figure 8 GYXTC8S aerial fiber optic cables:
1.figure 8 type
2. aerial using
3.accept OEM

outdoor single mode/multimode figure 8 GYXTC8S aerial fiber optic cables   

 

Product Description

 

The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube. Steel wires and loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.

 

 

Technical Parameters

Cable Type Fiber Count Cable Diameter mm Cable Weight kg/km Supporting Wire Spec Connection Diameter Tensile Strength Long/Short Term            N Crush Resistance Long/Short Term N/100mm Bending Radius S tatic /Dynamic mm GYXTC8S 2~12 7.65×14.5 118 Φ1.0mm*7 Stranded wires Height×Width 3.0×2.5 mm 1000/2500 300/1000 80/160 GYXTC8S 14~24 8.2×15.1 129 Φ1.0mm*7 Stranded wires Height×Width 3.0×2.5 mm 600/1500 300/1000 90/180

  

Material:Fiber,Fiber Gel,Loose Tube,Steel Plastic Tape,Water-blocking Material,PE sheath

 

 

Advantages:

· High tensile strength of stranded wireds meet the requirement of self-supporting and reduce the installation cost

· Good mechanical and temperature performance

· High strength loose tube that is hydrolysis resistant

· Specail tube filling compound ensure a critical protection of fiber

· PSP enhancing moisture-proof

· Small diameter, light weight and friendly installation

  

 

Application:

1.Usable for aerial installation

2.Long-haul communication systems

3.Junction communication systems

4.Network systems 

 

Packaging&Shipping: Wooden drums&by sea