FLOODED Type Ground Source Heat Pump for Underground water

Specifications

GSHP 480M-3800M
Cooling capacity: 480-3800 kW
Heating capacity: 518-4104 kW

GSHP 480M-3800M

Cooling capacity: 480-3800 kW

Heating capacity: 518-4104 kW

FEATURES

1.22 sizes available ranging from 518 kW to 4104 kW heating capacity.

2.Reusable: using solar energy stored in earth as cooling & heating source.

3.Great environmental and economic benefit: no boiler or cooling tower; less space, less CO2 and less initial investment.

4.Acting as multi-function unit such as cooling, heating, sanitary hot water separately or simultaneously.

5.Wide application as hotel, apartment, villa, factory,shopping center, office building, school, etc.

6.Semi-hermetic screw compressor for the whole range. Each compressor is equipped with a crankcase heater and a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.

7.The refrigerant circuit is complete with sight glass, filter drier, high and low pressure gauges, solenoid valve,electronic expansion valve, high and low pressure

switch.

8.Shell and tube dry expansion type condenser, factory insulated with flexible close cell material.

9.Flooded type shell and tube evaporator, higher efficiency less water consumption, easy maintenance and cleaning,factory insulated with flexible close cell material.

10.The electric panel consists of compressor breaker,compressor contactor, phase sequence relay, control circuit breaker, microprocessor control with function display.

11.LCD display, touch screen control panel as standard.

12.Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

13.An infinitely variable capacity control system that is capable of exactly matching the demand requirement of the system is to be supplied. This system is to provide precise and stable control of supply water temperature over the complete range of operating conditions.

OPTIONAL

(1)Desuperheater as optional.

(2)Electronic controller with BMS system.

(3)Low noise compressor cabinet or outside full cover

(4)Channel Steel base