Barrier-free Lifting Platform / Wheelchair Hydraulic Mobile Lift Platform

Barrier-free Lifting Platform / Wheelchair hydraulic mobile lift platform

Barrier-free Lifting Platform /  Wheelchair Elevator Lift

Platform size: 1580mm *870mm

Maximum Load Capacity: 250KG

Barrier-free Lifting Platform Specifications

Platform size: 1580mm * 870mm

Overall Dimensions: 1580mm*1250mm*1215mm

Maximum Lifting Height: 1000mm

Minimum Height of Lifting Bottom-plate: 65mm

Entry & Exit Mode: 180°

Lifting Speed: 30mm/s

Maximum Load Capacity: 250KG

Control Source: 24V/DC

Motor Power: 0.8KW,24V/DC/ or 1.5KW,220V/AC

Battery Supply: 24V/DC, 30A/H secondary battery ( for DC only)

Power Supply: 220V/50HZ/25A

Drive System: Hydraulic driven or screw driven

Running Mode: Jogging control or automatic control

Installation Mode: Non-base pit installation, directly fixed on the concrete ground

Extrocontrol Device: The external calling box should be separately installed in the neighboring wall of the above/below stopping floor of the equipment. Besides, remote controller could also be selected.

Manual Operation::The lifting bottom-plate shall manually descend when the manual hydraulic Valve is open or manually rotates the screw.

Safety Device

Safety Interlocking::The lifting platform shall not run if operates improperly.

Safety Edge: The operation must be stopped immediately the safety edge meets obstacles during operation.

Emergency Descending: When there is malfunctions or no power, manually descend the device

Safety Wane::The front/back wane shall upwarp during lifting process