Home > Products > New Products > reverse osmosis membrane price pressure vessels SCR100-CSM100G

Share|

reverse osmosis membrane price pressure vessels SCR100-CSM100G

FOB Price

USD $19 - $21.7 / Piece

1000 Pieces(Min.Order)

Supply Ability 1000000000 Piece / Pieces per Month
Port shengzhen/guangzhou
Payment Terms:T/T D/P D/A Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Details

Place of Origin:

Seoul, South Korea

Brand Name:

CSM

Model Number:

SCR100-CSM100G

Product Description

reverse osmosis membrane price pressure vessels SCR100-CSM100G

Product Description

Band :CSM

Flow rate:100G

These model names are tested and certified under NSF/ANSI standard 58, material

requirement only.

1.The stated product performance is based on data taken after 30 minutes of operation

at the following test conditions:

•200 mg/L NaCl solution at 60 psig (0.41MPa) applied pressure

•15% recovery

•77oF (25oC)

•pH 6.5–7.0

2.Dry type elements are vacuum leak tested using the San Diego Protocol.

3.Permeate flow rate for each element may vary but will be no more than 15%.

4.Dry elements are packaged in a polyethylene bag¤Wet elements are packaged in a polyethylene bag containing SB(4g/L) + HCl(0.51g/L) solution.

RESIDENTIAL

RO elements for residential use (1.8 inch diameter)

APPLICATION DATA:Operating Limits·

Max.Operating

Pressure 125psi (0.86MPa)·

Max.Feed

Flow Rate 2 gpm (0.45m3/hr)·

Max.Operating Temperature 113oF (45oC)·

Operating pH Range 2.0–11.0·

Max.Turbidity 1.0 NTU· Max. SDI (15 min) 5.0·

Max.Chlorine Concentration < 0.1 mg/L

The information provided in this document is solely for informative purposes. It is the user’s

responsibility to ensure the appropriate usage of this product. Woongjin Chemical assumes no obligation, liability or damages incurred for the misuse of the product or for the information provided in this document.This document does not express or impliesany warranty as to the merchantability or fitnessof the

products.

GENERAL

HANDLING PROCEDURES

Elements contained in the boxes must be kept dry at room temperature (7–32°C; 40–95°F)and should not be stored in direct sunlight. If the polyethylene bag is damaged, a new preservative solution (sodium bisulfite) must be added and air-tight sealedto preventdrying andbiological growth.

Permeate from the first hour of operation should be discarded to flush out the preservative solution.

Elements should beimmersed in a preservative solutionduring storage, shipping and system shutdowns to prevent biological growth and freezing. The standard storage solution contains 1% by weight sodium bisulfite or sodium metabisulfite (food grade). For short term storage (i.e.

one week or less) 1% by weight sodium metabisulfite solution is adequate for preventingbiological growth.

Keep elements moist at all times after initial wetting.

Only use chemicals compatible with the membrane elements and components. Use of such chemicals may void the element limited warranty.

Permeate pressure must always be equal or less than the feed/concentrate pressure. Damage caused by permeate back pressure voids the element limited warranty

CSM details'

Contact Us

Guangdong Find-Tech Co., Ltd.: Contact nameSuki LIU; Phone86-020-39108331; AddressPanyu Guangzhou,Guangdong

Product Categories

New Products

ro machine

water filter

New Products

reverse osmosis membrane price pressure vessels SCR100-CSM100G

Product Details

Product Description

Contact Us

Popular Searches

Recommended Products

Find Similar Products By Category