Hot sales environment friendly grinding wheel machinery

grinding wheel machinery features:

1. Low investment, high efficiency and fast recovery.

2. Applicable over large areas, may be grind a variety of materials below the hardness of six.

3. Self-made system, little of the production part, the material which below 25mm can be processed directly into the machine.

4. No pollution,the result of eliminate dust is fully meet the national standards.

5. High airproof of the grinding roller device.

grinding wheel machinery working principle

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, edge of then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe. When the grinding wheel machinery is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.The high-pressure air blower constantly inhales air within the grinding wheel machinery , in turn, the air flow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the grinding wheel machinery for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall an exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.

The application of grinding wheel machinery

grinding wheel machinery is mainly used to produce fine powder and super fine powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, etc.

Technical Data of grinding wheel machinery :