Specifications

single lnb, universal LNB for satellite receiver, lowest Noise Figure LNB ku band

 

Low Noise Figure single LNB (Satellite LNBF, Ku Band LNBF)

 

SPECIFICATIONS: 
1) Input Frequency:  10.70~12.75GHz

2) Output Frequency:  950~2150MHz
3) LO Frequency:  9.75/10.6GHz;9.75/10.75GHz
4) Noise Figure:  0.3dB(Typ.) 
5) Conversion Gain:  60dB(Typ.) 
6) F/D Radio:  0.6 
7) Input Interface:  Wave guide WR-75
8) Cross Pol. Isolation:  20dB(Typ.)
9) Image Rejection:  45dB(Min.) 
10) Polarity Switching Voltage:Vertical:  12-14.5V ;Horizontal:16-18V 
11) Operating Voltage:  Vertical:11.5 ~ 14 Vdc ;Horizontal:16 ~19 Vdc 
12) Band Switching Pulse:  0/22kHz tone
13) Gain Flatness:  (more or less)0.5dB/27MHz 14) D.C.Current Consumption:  160mA(Max.) 
15) LO phase noise:  -70dB/Hz at 10kHz;-90dB/Hz at 100kHz;-110dB/Hz at 1MHz 
16) Output power(at 1dB gain compression):  10dB(Min.)
17) Out put VSWR:  2.5:1(Max.) 
18) Output connector:  75 F type female
19) Operating Temperature:  -40 ~ +60
20) Storage Temperature:  -55 ~ +80