Contact Platform Support
Help CenterSINBON Magnetic Separator for Food
Related Products
-
SINBON Biscuit Metal DetectorUS$ 8,500 - 10,000MOQ: 1 Set -
SINBON Paste Metal DetectorUS$ 6,000 - 8,000MOQ: 1 Set
-
SINBON Economic Metal DetectorUS$ 5,500 - 6,500MOQ: 1 Set
-
SINBON Gravity Metal Detector for Powder FoodUS$ 5,000 - 6,000MOQ: 1 Set
-
SINBON Soap Industry Metal DetectorUS$ 5,500 - 6,500MOQ: 1 Set
Magnetic Separator for food industry / Magnetic Separator for Pharmaceutical Industry
INTRODUCTION
Drawer type Magnetic Separator is composed of cabinet and single layer or multilayer magnetic bars which can be draw out. If you hope have good performance of separate the irons, the best choice is multilayer, because multilayer can decrease the flow speed of material and also crack the block of material and can also avoid blind area which magnet not strong.
Drawer type Magnetic Separator is popular in the material manufacturers. It has widely application and easy to clean. It can also use different size and connect mode to integrate to production line, pipe type or chute type all can use it. We can design magnetic separator according to customer’s special requirement, so they can be easy to install to their current production line.
Depend on different separate irons requirement, different temperature and economic requirement, we can use different material to produce magnetic separator, such as NdFeB, samarium cobalt, ferrite, AlNiCo magnetic bars. The stronger magnetic material can separate the smaller irons, so it can also ensure much better material purity and protect machine’s safety in next step.
Drawer type Magnetic Separator use all kinds of door to avoid powder leak out, such as door with sealing washer, door with fastener; It can ensure good working environment. Operator is easy to open and close door and also easy to clean out the irons
If customer need monitor the Separator working Status inside, we designed organic glass door or cabinet, operator will be easy to see how much irons absorbed by magnetic bars and can clean it at any time. Some design is simple draw out the magnetic bar and irons absorbed on stainless steel pipe without magnetic will fall automatic.
APPLICATION
Magnetic Bar Frame is mainly used to absorb irons mixed in powder, liquid or sauce
Widely used in Ceramic, electric power, mining, plastic, chemical, rubber, pharmaceutical, food, environmental protection, electronics, metallurgy, pigment industries.
SPECIFICATION
Model No.: MS-200
Qty of Layer and Magnetic Bars: 5 Layers, 27pcs of Magnetic Bars
Magnetic Field Intensity on Surface: 12000GS
Magnetic Bar Diameter: 25mm
Pipe Diameter for bars: 27mm/32mm
Material: Material of cover of magnetic bar is stainless steel 304, other parts of materials which contact with product is stainless steel 304 or stainless steel 316L
Temperature: ≤100℃
Connection Mode: DN200 fast chuck or flange connection
About Us
Shanghai HARVEST Electronics Co., LTD is a professional manufacturer and trading company of Metal Detector, Needle Detector, Check Weigher, Liquid Filling Machine, Screw Capping Machine, Vial Capping Machine, Electromagnetic Induction Sealing Machine, pharmaceutical machines, Separator, Conveyors etc. Our machines worked in more than 30 countries and regions till now and popular in the world on its high stability with super performance of machines. Our professional staff offers good and fast after sales service to ensure machines working well in customer’s factory.
1.How to choose suitable machine?
Considering that machinery are different base on different customer’s requirement, we advise you discuss with our sales engineer firstly, then confirm the order. Our engineer will advise you a suitable machine for your application to avoid wrong machine ordered. If current machine cannot meet your requirements, we will custom made machine for your application.
2. Quality
(a)We offer good quality machinery and it mainly shows in three aspects: (a) Working Life: about 7-8 years; (b) Good Stability: stability is basic and most important performance of machinery; (c) Lower Expenditure of machinery daily maintenance.
(b) All the machines before delivery, our QC will inspect it carefully to ensure good quality.
3. Price
Our machine prices are based on reasonable prices; because we should ensure machine has good quality firstly, so machine parts used are also should be good quality and also very different costs on design & manufacture costs.
4. Warranty Period
(a) 12 (Twelve) months dated from delivery (Consumable parts and man-made broken are not included); If need much longer warranty period, you need buy this extra service. During warranty period, we offer replaced new parts for free.
(b) Out of warranty period, we will offer spare parts and technical support too and help customer to solve problems; If need replace parts, we will charge parts costs
Shipping and Packing
For machinery, normally, it was packed into wooden case to avoid broken on the way and normally delivery by sea or by air; for small products will be packed in carton box and normally delivery by courier. We will choose a suitable packing for your ordered products to avoid broken on the way.
How to install new machine?
(a) Most of our machines don’t need our engineer to visit customer’s factor to install, under this circumstance, just refer our user manual to install machines; if you have any questions, you can consult with our professional engineer and they will give you instructions to guide you how to do via pictures, videos etc.
(b) For some complicated machinery, customer can arrange their engineer to come to our factory for training before we delivery machines; if do need, our engineer also can go to your factory to install it, but you have to bear all the travel costs including board and lodging costs , round-way air tickets and Daily labor costs
How to offer maintenance for old machine?
(a) If old machines have any problem, customer can describe this problem to us via email; In order to avoid false understanding problem, we advise you offer us pictures and videos to show us real problems occurred; under this circumstance, we can easy to judge the problem and advise you how to solve. If need replace parts, your engineer should obey our instruction to change it.
(b) If your engineer has no this ability to repair the machine, you can also delivery the machine back to us for repair or request our engineer go to your factory to solve it; All repair costs occur should be paid by buyer.
(c) Maybe in your regions, we have local agent who can offer service to you; we can introduce you to them, if you need this local service.
Send Inquiry to This Supplier
You May Also Like
-
BT Dry Permanent Drum Magnetic SeparatorNegotiableMOQ: 1 Set
-
Mineral SeparatorNegotiableMOQ: 2700 Sets
-
Top Log Washer SuppliersUS$ 2000MOQ: 1 Set
-
Match With Tunnel Boring Machine Separation PlantNegotiableMOQ: 1 Set
-
Alluvial Gold Sand Movable Gold Trommel MachineUS$ 2,000 - 50,000MOQ: 1 Set
-
Ceramsite Linear Vibration Sieve/seapratorUS$ 1,000 - 6,000MOQ: 1 Set
-
Henan Manufacturer Wholesale Gulch-gold Wet Grinding MachineUS$ 100 - 8,000MOQ: 1 Set
-
3 Inch Mini DredgeUS$ 2,000 - 4,000MOQ: 1 Set
-
First-rate High Efficiency SZZ Series Self-centering Vibrating Screen With ISO 9001 CertificateUS$ 2,500 - 55,000MOQ: 1 Set
-
Vibrating Sieve for SaltUS$ 2,647 - 2,700MOQ: 1 Set
