Contact Platform Support
Help CenterCast Film Printing and Lamination Line
Related Products
-
Car Mat Lamination LineUS$ 80,000 - 250,000MOQ: 1 Set -
Rich Mineral Paper Production MachineUS$ 80,000 - 140,000MOQ: 1 Set
-
PV Back Panel Lamination MachineUS$ 50,000 - 250,000MOQ: 1 Set
-
Single-layer Multi-layer Co-extrusion Casting Film MachineUS$ 80,000 - 250,000MOQ: 1 Set
-
Breathable Casting Film Extrusion MachineUS$ 50,000 - 250,000MOQ: 1 Set
Cast Film Printing and Lamination Line
Made with multiple innovative extrusion technologies, our cast film printing and lamination line is mainly designed to perform printing and lamination on the paper substrate. The resultant laminate is used as quality wrapping paper. The extrusion lamination equipment used on this laminate production line represents an upgrade from the model SDF. It uses LDPE and LDPP as raw plastic materials to produce thin hot extruded films which will then be coated onto the paper, non-woven fabric, woven cloth, and aluminum foil.
The purpose of lamination is to form a thin film or overlay on the substrate surface. This cast film printing and lamination line is ideal equipment for producing paper cups, non-woven cloth, kraft paper, release liner, aluminum foil, duct tape, gauze, PET film, etc.
Technical Specifications
1. Extruder screw: φ90mm, length-diameter ratio: 32:1
2. Made of 38CrMoAl, the extruder screw used on the printing and lamination line has been quenched, tempered and surface nitridized.
3. The extruder barrel contains dedicated mixing and melting zones to ensure the raw plastics are thoroughly mixed. Thanks again this unique extruder barrel, large volumes of extrusion output are achievable.
4. T-shaped die: JINGCHENG (brand name) (state-of-the-art thin-wall die), material: 5CrNiMoV,
5. The extrusion die used on this cast film printing and lamination line has been through quenching and tempering processes to obtain good toughness and hardness. It is able to used at high temperatures frequently without deformation.
6. Fully sealed gear box contains reliable gear sets with hardened gear teeth.
7. Omron digital intelligent temperature control system
8. Applications: 40gsm~120gsm base paper roll
9. Raw material for lamination: PE, PP
10. Effective width of printing and lamination: 1100~1600mm
11. Lamination thickness: 0.012~0.035mm (single-layer)
12. Lamination uniformity: ±6% (tolerance)
13. Peeling strength: 3~5N/30mm (according to the variety of substrate to be laminated)
14. Maximum extrusion output: 220kg/h (single-layer)
15. Designed speed: 0~100m/min
16. Double winding and unwinding rollers allow the slitter to maintain a high, constant speed even when the paper roll needs replacing. The imported PLC system adopts the vector control to adjust the tension during winding unwinding. Automatic deviation correction system comes with a trolley-mounted electronic power-train control. Deviation correction stroke: ±100mm, deviation control precision: ±0.5mm
17. Printing: 2-color gravure printing
18. Printing drying method: electrically heating. Each heating unit has automatic temperature control which makes it easier to print various colors on the substrate.
19. Printing plate loading method: shaft-less drive and pneumatic control allows for rapid change of printing plates and accurate positioning.
20. Printing plate diameter range: φ130~φ300mm
21. Registration accuracy: ±0.2mm (lengthwise), ±0.2mm (transversely)
22. Axial runout of the scraper: ±10mm, pneumatically controlled clutch
23. Pneumatic winding and unwinding shafts: 3inch (φ76mm)
24.Imported PLC system controls the roll tension during unwinding, printing and lamination speed (starting at a low speed with full load and gradually increasing the speed), and roll tension during winding.
25. The extruder base comes equipped with the light rail. It can be moved flexibly forward or backward. Reliable and durable, the extruder base also has a positioning device.
26. Automatic metering during winding
27. Maximum diameter of unwound roll: 1000mm, maximum diameter of wound roll: 1000mm
28. Extruder barrel heating method: ceramic band heater (Note: Each section of the extruder barrel is equipped with an ammeter, and short-circuiter for electrical leak and overload protection.)
29. Die heating method: stainless steel internal heating system (Note: Each section of the die is equipped with an ammeter, and short-circuiter for electrical leak and overload protection.)
30. Installed power: 230kw
31. Dimension of the cast film printing and lamination line (L×W×H): 14400mm×9600mm×3200mm
32. Total weight of the cast film printing and lamination line: 24000kg (approximately)
3. Pictures of Cast Film Printing and Lamination Line
800mm Cast Film Printing and Lamination Line
900mm Cast Film Printing and Lamination Line
1000mm Cast Film Printing and Lamination Line
1100mm Cast Film Printing and Lamination Line
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Mono Layer Extrusion Air Bubble Film Extrusion LineryUS$ 20,000 - 60,000MOQ: 1 Set
-
LIANJI Plastic Extrusion Blow Molding MachineUS$ 99 - 199MOQ: 1 Set
-
PP/HDPE Flat Yarn Making Machines for Woven Bag/Cement Bag/Container Bag PlantsUS$ 8,500 - 8,500MOQ: 1 Set
-
Chinese Waste Plastic Board Recycling MachineUS$ 40,000 - 48,000MOQ: 1 Set
-
The Waste Tire Recycling Production Line With CE ISO SGSUS$ 20,000 - 80,000MOQ: 1 Set
-
Plastic Board Production LineUS$ 6.98 - 15.64MOQ: 500 Pieces
