CCIT SHDSL MODEM CCPAM2000
Specifications
shdsl modem CCPAM20001.supporting full duplex symmetric
2.data rate of Nx64 Kbps over twist pair line.
Features
· Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and greater interoperability
· Fast and cost effective provisioning of traditional frame relay (FR or THDLC) or TDM leased line services
· User existing copper loop infrastructures
· Can operate back to back connection
· Efficient single wire pair usage
· Up to 2.3Mbps symmetric service bit rate
· Auto rate installation maximizes ata rate based on loop conditions
· Local management interface with LCD display
· Remote line loopback
· SHDSL Line performance monitoring
· Raw and per time interval statistics
The CCPAM2000 SHDSL NTU interface DC input with LCD display, offers customers premises
to highspeed TDM services with an interfaceE1/V.35/ETH. The industry standard interface
( G.702 E1 / DB34 V35 / RJ45 ETH ) can be configured as an E1/V35/ETH connection.
The interface connection transfers data up to 2.304Mbps.
The SHDSL NTU can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or remotely.
THE CCPAM2000 is equipped with an auto rate capability that identifies the maximum line
rate supported by the copper loop. This powerful automatic configuration capability makes
installation and service provisioning simple and painless. Further flexibility is provided in the
ability to manually set the maximum NTU speed at different levels for different customer-tailored service offerings.
Specifications
Network Interface
· Line Rate: SHDSL per ITU G.991.2
· Coding: Trellis coded pulse amplitude modulation
· Support: ANSI (Annex A) and ETSI (Annex B)
· Payload rates: 192kbps to 2.304Mbps N x 64kbps (N=3 to 36)
· Connection: RJ-45 jack (2-wire)
G.703 Interface
· RJ-48C for balanced 120 Ω
· BNC for unbalance 75 Ω
Framing
· G.703/G.704
· CRC 4 enable/disable
· Unframed
· Framed
V.35 Interface
· Bit Rate: 192 kbps to 2.304Mbps N x 64 kbps (N=1 to 36)
· Connection: DB-34 Female for V.35
LAN Interface
· Bit Rate: 192 kbps to 2.304Mbps N x 64 kbps (N=1 to 36)
· Connection: RJ-45 for Ethernet
DSL Timing
· Network
· Internal
· DTE
Performance Monitoring
· ES, SES, UAS, Alarms, Errors for SHDSL
Loopback Tests
· Local Loopback
· Digital Loopback
· Remote Loopback
· V.54 Loopback
· Build-in 211-1 bit tester
Management
· Configuration with keypad and LCD display
· Console port
· Support firmware upgradeable
Physical/Electrical
· Dimensions: 20.8 x 4.5 x 21.1 cm
· Input: 90~240VAC with 50~60Hz
· Power Consumption:10W Max
· Operation: 0 to 50°C
Humidity: Up to 95% (non-condensing)
Send Inquiry to This Supplier
You May Also Like
-
Communication ModuleNegotiableMOQ: 2300 Pieces
-
Pressure Sensor Water for Mobile Phone Gate Opener,remote ab SwitchUS$ 70 - 100MOQ: 1 Piece
-
GSM ModemUS$ 10 - 20MOQ: 1 Piece
-
Temperature Sensor Label Used for Electric Substation Monitoring/Waterproof, Outdoor Use OKUS$ 90 - 180MOQ: 40 Cases
-
M2M ModemNegotiableMOQ: 1 Unit
-
Multi-interface Easy to Operate Led Screen TS852 External Sending Box With CardUS$ 1 - 400MOQ: 1 Set
-
QUECTEL SC20ESC-8GB-UGND SC20AUSC-8GB-UGND SC20AUSA-8GB-STD SC20JSA-8GB-STD Cat4 4G Smart ModuleUS$ 70 - 90MOQ: 1 Unit
-
Jinwen RF Power Amplifier 5720-5860MHz, 200 Watts, Used for Unmanned Aerial Vehicle Jamming, Electronic Countermeasures, EtcUS$ 1300 - 1820MOQ: 1 Unit
-
MR100A IoT Industrial 4G Router Module, Global VersionNegotiableMOQ: 1 Piece
-
Nokia AirScale System Module ASIA 473095A for 4G/5G Base StationNegotiableMOQ: 1 Unit