CCIT SHDSL MODEM Rate up to 5.69M-22M CCPAM 5000
Specifications
shdsl modem CCPAM50001.can support Rate up to 5.69M-22M
2. Support of Annex A, Annex B, Annex F, and Annex G
ITU-T G.991.2
CCPAM 5000 G .SHDSL.bisrouter takes advantage of the latest G.SHDSL.bis technology- Extended Rate Bonded SHDSL- unfolding unprecedented possibilities for symmetric transmission.
CCPAM 5000s multi-pair bonding, higher bit and packet transport allow carryingsymmetric data rates up to 5.69 Mbps, 11.38Mbps, or 22.76Mbps over 2-wire, 4-wire, or 8-wire of ordinary telephone lines respectively at the same reach range.
The application of CCPAM5000 is an ideal product for businesses and Internet Service Providers (ISP) to provide LAN extension and internet access; and its flexibility makes it ideal for applications such as web hosting, video conferencing and heavy two-way data traffic needed, particularly in the business environment. With an user-friendly management mechanism present, CCPAM5000 can easily be configured via interfaces, such as TELNET, Web GUI, etc.
Standard Compliance |
Protocol |
|
ITU-T G.991.2
Transmission rate up to 5.69 Mbps on 2-wire
Transmission rate up to 11.38 Mps on 4-wire
Transmission rate up to 22.76 Mbps on 8-wire
Support of Annex A, Annex B, Annex F, and Annex G
Auto load balancing with bonded pairs
Support point-to-point configuration
|
Support ATM over G.SHDSL.bis and G.SHDSL
MAC bridging(IEEE 802.3 and 802.1D)
PPPoE (RFC 2416)
RFC 1483/2684 Bridged encapsulation (routing mode optional)
IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
Support 8 PVCs
NAT/PAT support
DHCP client/server and DHCP relay functionality
VPN pass-through IPSec and L2TP
Support IGMP Snooping
DMZ support
Support Port-based VLAN
|
Maintenance | |
|
Firmware upgradeable via FTP or HTTP
Support Telnet
Support ATM OAM F5 End to End and Segment loopbacks
Statistics on DSL link and data ports
Sys-log
| |
anagement |
LED |
|
Password protection
PAP and CHAP support
Remote access management via telnet
SNMPv1, v2c
Firewall Security
Packet Filter
Denial of Service
Stateful Packet Inspection (SPI)
Attack Alert and log
Access Control
Real time log
MIB-II (RFC 1213, RFC 1573)
Web based GUI interface
Command Line Interface (CLI)
|
LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode
|
Hardware Interface | |
|
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jack
Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID)
| |
Dimensions & Weight | |
|
Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g
| |
Operating Requirements | |
|
Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing
|
Standard Compliance |
Protocol |
|
ITU-T G.991.2
Transmission rate up to 5.69 Mbps on 2-wire
Transmission rate up to 11.38 Mbps on 4-wire
Transmission rate up to 22.76 Mbps on 8-wire
Support of Annex A, Annex B, Annex F, and Annex G
Auto load balancing with bonded pairs
Support point-to-point configuration
|
Support ATM over G.SHDSL.bis and G.SHDSL
MAC bridging(IEEE 802.3 and 802.1D)
PPPoE (RFC 2416)
RFC 1483/2684 Bridged encapsulation (routing mode optional)
IP support TCP, RIPv1, RIPv2, UDP, ICMP, ARP
IEEE802.1P Priority Output Queuing
IEEE 802.1Q VLAN
IEEE802.3u Fast Ethernet 100BaseT
MAC Filtering
QoS support VBR-rt, VBR-nrt, CBR and UBR
Support 8 PVCs
NAT/PAT support
DHCP client/server and DHCP relay functionality
VPN pass-through IPSec and L2TP
Support IGMP Snooping
DMZ support
Support Port-based VLAN
|
Maintenance | |
|
Firmware upgradeable via FTP or HTTP
Support Telnet
Support ATM OAM F5 End to End and Segment loopbacks
Statistics on DSL link and data ports
Sys-log
| |
anagement |
LED |
|
Password protection
PAP and CHAP support
Remote access management via telnet
SNMPv1, v2c
Firewall Security
Packet Filter
Denial of Service
Stateful Packet Inspection (SPI)
Attack Alert and log
Access Control
Real time log
MIB-II (RFC 1213, RFC 1573)
Web based GUI interface
Command Line Interface (CLI)
|
LED indicator; power, DSL links, Alarm, Ethernet ports and CO/CPE mode
|
Hardware Interface | |
|
DSL interface: 2/4 wires one RJ-11 jack. 8 wires two RJ-11 jack
Ethernet interface: four RJ-45 jack; 10/100BaseT auto sensing and crossover
AC power adapter (100VAC ~ 240VAC, 50-60Hz)
One craft Interface for local console access (CID)
| |
Dimensions & Weight | |
|
Dimensions: 35mm(H)×210mm(W)×193mm(D)
Weight: 914g
| |
Operating Requirements | |
|
Operating temperature: 0C to +50C
Operating humidity: 5% to 90% RH non-condensing
|
Send Inquiry to This Supplier
You May Also Like
-
Communication ModuleNegotiableMOQ: 2300 Pieces
-
Pressure Sensor Water for Mobile Phone Gate Opener,remote ab SwitchUS$ 70 - 100MOQ: 1 Piece
-
GSM ModemUS$ 10 - 20MOQ: 1 Piece
-
Temperature Sensor Label Used for Electric Substation Monitoring/Waterproof, Outdoor Use OKUS$ 90 - 180MOQ: 40 Cases
-
M2M ModemNegotiableMOQ: 1 Unit
-
Multi-interface Easy to Operate Led Screen TS852 External Sending Box With CardUS$ 1 - 400MOQ: 1 Set
-
QUECTEL SC20ESC-8GB-UGND SC20AUSC-8GB-UGND SC20AUSA-8GB-STD SC20JSA-8GB-STD Cat4 4G Smart ModuleUS$ 70 - 90MOQ: 1 Unit
-
Jinwen RF Power Amplifier 5720-5860MHz, 200 Watts, Used for Unmanned Aerial Vehicle Jamming, Electronic Countermeasures, EtcUS$ 1300 - 1820MOQ: 1 Unit
-
MR100A IoT Industrial 4G Router Module, Global VersionNegotiableMOQ: 1 Piece
-
Nokia AirScale System Module ASIA 473095A for 4G/5G Base StationNegotiableMOQ: 1 Unit