Before installation, please check the part list. Make sure that you already have the total package of our tracker and one sim card which is enabled with GPRS data and sms.

Notes:The sms function is used to debug while tracker failed to be online, such as set the apn/user name/password.

Find Position to Install

Before installation, please check the vehicle to find the appropriate position to install the gps tracker body. Usually the tracker should be install under the dashboard which is hide to the driver or passenger. But make sure that the gps antenna should not be masked by metal and the side with label is facing to ground, otherwise gps will not be fixed.

The fuse box is one option for power to the gps tracker. But make sure that the inserting of gps tracker does not change the behavior of the fuse box. Please make sure the gps tracker power supply do not interfere with the security and safety system.

Insert SIM Card

Check LED Status

After power on, please wait for about 1 mintue later, then watch the led status.

If red led slow flash, please send sms message to set ip, port ,apn.

If yellow led slow flash, please put gps antenna to opensky.

If any led always on or off, please power off and check sim card and antenna. If still same problem, please contact us for maintainance.

SMS Configuration

Only if red led slow flash, sms configuration can be helpful.

Please make sure sim card is enabled with sms and gprs business.

Below format is the standard SMS to configure server, port, apn, tracker id and etc.