Contact Platform Support
Help CenterLiquid Distributor Tower Internals for Packed Columns and Uniform Liquid Distribution
Product Spotlights
Related Products
-
Liquid Redistributor Tower Internals for Packed Column Intermediate Liquid CollectionNegotiableMOQ: 1 Piece -
Packing Support Plate Tower Internals for Random and Structured Packed ColumnsNegotiableMOQ: 1 Piece
-
Hold-down Grid Bed Limiter Tower Internals for Random and Structured PackingNegotiableMOQ: 1 Piece
-
Liquid Collector Tray Tower Internals for Packed Distillation and Absorption ColumnsNegotiableMOQ: 1 Piece
-
Gas Distributor Vapor Distributor Tower Internals for Packed Absorption and Distillation ColumnsNegotiableMOQ: 1 Piece
| Product Name | Liquid Distributor |
| Product Type | Tower Internals |
| Material | SS304 / SS316 / SS316L / PP / Custom |
| Application | Liquid Distribution |
| Tower Type | Packed Column |
| Process | Distillation / Absorption / Stripping |
| Installation | Inside Tower |
| Design Basis | Tower Diameter / Liquid Load |
| Customization | Diameter / Segment Size / Material |
| Manway Design | Segmented if Required |
| Project Type | New Tower / Revamp / Replacement |
| Industry | Chemical / Petrochemical / Gas Treatment |
Liquid Distributor for Packed Columns
DAIER Separation Liquid Distributor is a tower internal used to distribute liquid across the top of a packed bed.
Uniform liquid distribution is important for packed tower performance because poor distribution can cause channeling, uneven wetting and reduced utilization of the packing surface.
Distributor design should therefore be selected according to the actual tower geometry, liquid load, process conditions and packing type.
Typical Applications
Distillation columns
Absorption towers
Stripping columns
Chemical process towers
Gas treatment towers
Packed tower revamps
Existing distributor replacement
Custom Design Options
Liquid distributors can be evaluated according to:
Tower internal diameter
Liquid flow rate
Required material
Packing type
Operating temperature
Process medium
Manway dimensions
Installation restrictions
New tower or retrofit requirements
RFQ Information
For quotation or preliminary design, please provide:
Tower internal diameter
Liquid flow rate
Process medium
Operating temperature
Operating pressure
Required material
Packing type below the distributor
Manway size
Existing tower drawing if available
New tower or replacement project
Pingxiang Daier Separation Tech Co., Ltd.
DAIER Separation
Specs and test data available upon request.
Send Inquiry to This Supplier
You May Also Like
-
Pipe Liquid Distributor Tower Internals for Packed Absorption and Distillation ColumnsNegotiableMOQ: 1 Piece
-
Trough Liquid Distributor Tower Internals for Large Diameter Packed ColumnsNegotiableMOQ: 1 Piece
-
PP Packing Support Grid Tower Internals for Corrosive Scrubber and Absorption TowersNegotiableMOQ: 1 Piece
-
Structured Packing Support Grid Tower Internals for Distillation and Absorption ColumnsNegotiableMOQ: 1 Set
-
Structured Packing Support Grid Tower Internals for Distillation and Absorption ColumnsNegotiableMOQ: 1 Set
-
Custom Tower Internals Package for Packed Column Revamp and Replacement ProjectsNegotiableMOQ: 1 Set
-
Wire Mesh Mist Eliminator for Gas Liquid Separation and Scrubber TowersNegotiableMOQ: 1 Set
-
Wire Mesh Mist Eliminator Mesh Pad Demister for Gas Liquid SeparationNegotiableMOQ: 1 Set
-
Vane Mist Eliminator Blade Type Gas Liquid Separator for Scrubber TowersNegotiableMOQ: 1 Set
-
PP Plastic Mist Eliminator Corrosion Resistant Demister for Scrubber TowersNegotiableMOQ: 1 Set