Contact Platform Support
Help Center5 Micron Polyethylene Membrane Filter Element, 2.5 Inch OD, 40 PSI, 30 GPM Flow Rate
Product Spotlights
Related Products
-
1 Micron Pleated Polyethylene Membrane Filter Element, 20 Inch, 90°C, 0.6 MPa, Water FiltrationNegotiableMOQ: 1 Piece -
Polyethylene Membrane Filter Element for Food and Beverage Clarification, 1 Micron, 20 Inch, SanitaryNegotiableMOQ: 1 Piece
-
Polyethylene Membrane Filter Element for Pharmaceutical Filtration, 0.2 Micron, 10 Inch, Sterile GradeNegotiableMOQ: 1 Piece
-
Polyethylene Membrane Filter Element 0.8 Micron, 20 Inch, 60°C, 0.3 MPa, For Chemical ProcessingNegotiableMOQ: 1 Piece
-
0.1 Micron Absolute Polyethylene Membrane Filter Element, 10 Inch, 150°F, 75 PSI, Non-WovenNegotiableMOQ: 1 Piece
As a trusted manufacturer since 1998, Anping County Boli Hardware Wiremesh Products Factory proudly presents the 5 Micron Polyethylene Membrane Filter Element with a 2.5 Inch outer diameter, rated for 40 PSI and delivering a 30 GPM flow rate. This filter element is engineered to provide reliable and efficient filtration for a wide range of liquid applications, combining high dirt-holding capacity with low pressure drop. Our decades of experience in wire mesh and filtration products ensure that every element meets stringent quality standards, making it a preferred choice for industrial and commercial water treatment systems.
The filter element features a uniform polyethylene membrane structure that captures particles as small as 5 microns, effectively removing sediment, rust, sand, and other suspended solids from water. Its robust design withstands continuous operation at up to 40 PSI, while the 30 GPM flow rate ensures high throughput without compromising filtration efficiency. Whether used in pre-filtration, process water, or irrigation systems, this element delivers consistent performance and long service life.
Key Features & Benefits
- High Filtration Precision: 5 micron nominal rating ensures effective removal of fine particles, protecting downstream equipment and improving water clarity.
- Durable Polyethylene Membrane: Chemical-resistant and non-toxic material suitable for potable water and many industrial fluids.
- High Flow Capacity: 30 GPM flow rate at 40 PSI ensures minimal pressure drop and efficient system operation.
- Standard 2.5 Inch OD: Compatible with most standard filter housings, easy to install and replace.
- Low Replacement Cost: Cost-effective solution for continuous filtration needs, with long intervals between changes.
- Wide Application Range: Ideal for water treatment, food & beverage, chemical processing, and agricultural irrigation.
Technical Specifications
| Filtration Rating | 5 Micron |
| Outer Diameter | 2.5 Inches (63.5 mm) |
| Maximum Operating Pressure | 40 PSI (2.76 bar) |
| Flow Rate (at 40 PSI) | 30 GPM (113.6 L/min) |
| Material | Polyethylene Membrane |
| Maximum Operating Temperature | 140°F (60°C) |
| End Cap Configuration | Standard Flat or Double Open End (customizable) |
| Application | Water Filtration, Industrial Process, Agriculture |
Detailed Product Description
The 5 Micron Polyethylene Membrane Filter Element is designed using advanced melt-blown or spun-bond technology to create a graded density structure. This means the outer layers capture larger particles, while the inner layers trap finer contaminants, maximizing dirt-holding capacity and extending service life. The polyethylene material is inherently hydrophobic, making it highly effective for water-based fluids, and it resists degradation from common chemicals like chlorine, acids, and alkalis within normal operating conditions.
Each filter element undergoes strict quality control checks, including pressure testing and flow verification, to ensure consistent performance. The 2.5-inch outer diameter is a standard size that fits most commercial and industrial filter housings, such as those used in reverse osmosis pre-treatment, well water filtration, and cooling tower systems. With a 30 GPM flow rate, this element is suitable for medium to high-flow applications, reducing the number of elements needed per system.
Installation is straightforward: simply insert the element into the housing, ensuring a proper seal. The element can be used with both flat and O-ring end caps, depending on your housing configuration. For optimal performance, we recommend replacing the element when the pressure drop across the filter reaches 10-15 PSI above the initial clean pressure drop.
Why Choose Anping County Boli Hardware Wiremesh Products Factory?
With over 25 years of manufacturing experience, we have supplied high-quality filtration products to markets across North America, South America, Europe, Asia, Africa, and Oceania. Our annual export value exceeds US$5 million, reflecting the trust and satisfaction of our global customers. We ship from major ports including Tianjin, Qingdao, Shanghai, and Foshan, ensuring timely delivery worldwide.
Our factory is equipped with modern production lines and rigorous testing equipment, allowing us to maintain consistent quality and offer customization options such as different lengths, end cap types, and gasket materials. We are committed to providing reliable filtration solutions that meet your specific requirements.
Contact us today to discuss your filtration needs or request a sample. Our experienced team is ready to assist you with technical support and competitive pricing. Experience the Boli difference – quality you can trust.
Frequently Asked Questions
Q1: What is the main material of this filter element?
A: The filter element is made of polyethylene membrane, which is chemically resistant and suitable for potable water and many industrial fluids.
Q2: Can this filter element be used for high-temperature applications?
A: The maximum operating temperature is 140°F (60°C). For higher temperatures, please consult our technical team for alternative materials.
Q3: What is the typical lifespan of this filter element?
A: Lifespan depends on the feed water quality and flow rate. Under normal conditions, it can last from 3 to 6 months before replacement is needed. We recommend monitoring pressure drop.
Q4: Does this filter element remove bacteria or viruses?
A: No, 5 micron filtration is not sufficient for removing bacteria or viruses. It is designed for sediment and particulate removal. For microbial reduction, please use a finer micron rating or UV treatment.
Q5: What end cap options are available?
A: Standard options include flat ends and double open ends (DOE). Custom end caps, such as O-ring or gasket seals, are available upon request.
Q6: Can I get a sample before placing a bulk order?
A: Yes, we offer samples for evaluation. Please contact our sales team with your shipping details and requirements.
Q7: Is this filter element compatible with all standard 2.5-inch housings?
A: It is compatible with most standard 2.5-inch OD filter housings, but we recommend verifying the housing dimensions and end cap type to ensure a proper fit.
Q8: What is the minimum order quantity (MOQ)?
A: Our MOQ is typically 100 pieces, but smaller quantities are available for sample orders. Please inquire for specific requirements.
Send Inquiry to This Supplier
You May Also Like
-
0.2 Micron Polyethylene Membrane Filter Element, 30 Inch, 304 SS End Caps, 80°C, 40 GPMNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge for Food and Beverage Processing 10 Micron Sediment RemovalNegotiableMOQ: 1 Piece
-
10 Inch PE Coated Filter Cartridge 1 Micron Nominal 80°C Temperature RatedNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge for Pharmaceutical Industry 0.2 Micron Sterile FiltrationNegotiableMOQ: 1 Piece
-
30 Inch PE Coated Filter Cartridge 5 Micron Absolute With 2.5 Inch Outer DiameterNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge 0.5 Micron 10 Inch Length 1.125 Inch Inner Diameter for WaterNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge 50 Micron High Flow Rate 40 Inch Standard SizeNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge 20 Micron 4.5 Inch OD 2.5 Bar Working PressureNegotiableMOQ: 1 Piece
-
20 Inch PE Coated Filter Cartridge 0.5 Micron With 4.0 Bar Max Pressure for Liquid FiltrationNegotiableMOQ: 1 Piece
-
PE Coated Filter Cartridge Standard Compliant Quick Replacement Service 30 InchNegotiableMOQ: 1 Piece
