Contact Platform Support
Help CenterSintered Phenolic Resin Liquid Filter Cartridge 50μm, 10-inch Length, 1.5MPa Max Pressure
Product Spotlights
Related Products
-
Sintered Phenolic Resin Filter Element 20 Micron, 0.5mm Thickness, 80°C Operating TemperatureNegotiableMOQ: 1 Piece -
Sintered Phenolic Resin Filter Element 100 Micron, 2.5-inch OD, 1-inch NPT ConnectionNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Cartridge for Beverage Filtration, 20 Micron PrecisionNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Cartridge 10μm, 100% Standard Compliant, Free Technical SupportNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Element 10 Micron for Liquid Filtration, 120°C Max Temp, 16 Bar PressureNegotiableMOQ: 1 Piece
Anping County Boli Hardware Wiremesh Products Factory (established in 1998) is a professional manufacturer dedicated to high-performance filtration solutions. Our sintered phenolic resin liquid filter cartridge with 50μm precision, 10-inch length, and 1.5MPa max pressure is engineered to deliver reliable solid-liquid separation in demanding industrial applications. Combining deep filtration capability with excellent mechanical strength, this cartridge offers a cost-effective alternative to traditional filter media while maintaining consistent quality and long service life.
Key Features & Technical Specifications
| Property | Value |
| Filtration Grade | 50 μm (nominal) |
| Length | 10 inches (254 mm) |
| Max Operating Pressure | 1.5 MPa (217 psi) |
| Max Operating Temperature | 120°C (248°F) |
| Outer Diameter | 2.5 inches (63 mm) standard |
| Core Material | Stainless steel or polypropylene (optional) |
Product Advantages
- High Mechanical Strength: The sintered phenolic resin structure provides excellent rigidity, allowing the cartridge to withstand pressure surges up to 1.5 MPa without deformation.
- Uniform Pore Distribution: Advanced sintering technology ensures consistent 50 μm pore size, delivering stable filtration efficiency and high dirt-holding capacity.
- Chemical Resistance: Resistant to a wide range of chemicals including acids, alkalis, and organic solvents, making it suitable for aggressive fluid environments.
- Easy Cleaning & Regeneration: The cartridge can be backwashed or chemically cleaned multiple times, extending its service life and reducing replacement costs.
- Low Pressure Drop: Optimized porosity ensures minimal resistance to flow, saving energy in pump systems.
Applications – This 50μm liquid filter cartridge is widely used in:
- Water treatment (pre-filtration, industrial wastewater)
- Chemical processing (solvent, acid, and alkaline solution filtration)
- Petrochemical industry (oil and fuel filtration)
- Pharmaceutical and food & beverage (sterile liquid filtration after validation)
- Electroplating and paint industry (high-purity liquid clarification)
Why Choose Our Factory?
With over 25 years of manufacturing experience, Anping County Boli Hardware Wiremesh Products Factory has built a solid reputation for quality and reliability. Our annual export value ranges from US$5 million to US$10 million, serving major markets across North America, South America, Europe, Southeast Asia, Africa, Oceania, and the Middle East. We ship from multiple ports including Tianjin, Qingdao, Shanghai, and Foshan, ensuring flexible logistics for global customers. Every cartridge undergoes strict quality control to meet international standards. We are committed to providing customized solutions tailored to your specific filtration requirements.
Frequently Asked Questions (FAQ)
Q1: What is the exact filtration efficiency of this 50μm cartridge?
A: The nominal rating is 50 μm, meaning it retains >90% of particles of that size. Actual efficiency may vary slightly depending on fluid viscosity and flow rate.
Q2: Can this cartridge be used for high-temperature applications above 120°C?
A: The standard operating temperature is up to 120°C. For higher temperatures, customized materials such as reinforced phenolic resin or alternative media are available upon request.
Q3: How do I clean and reuse the cartridge?
A: The cartridge can be cleaned by backwashing with clean water or a compatible solvent, or by chemical soaking. It is recommended to consult our technical team for specific cleaning procedures based on your contaminant type.
Q4: What end cap configurations are available?
A: Standard options include double open end (DOE), 222 O-ring, 226 O-ring, and flat gasket ends. Custom end caps can be produced for your housing.
Q5: Is this cartridge compatible with my existing filter housing?
A: The 10-inch length with 2.5-inch OD is a common size. Please verify your housing’s length, diameter, and sealing method. We can provide adapters or custom dimensions if needed.
Q6: What is the typical service life of this cartridge?
A: Service life depends on feed water quality, flow rate, and cleaning frequency. Under normal conditions, the cartridge can be used for 6–12 months with proper backwashing.
Q7: Do you offer samples for testing?
A: Yes, we provide sample cartridges for qualification. Please contact our sales team to discuss testing requirements.
Q8: What is the minimum order quantity (MOQ)?
A: Our standard MOQ is 50 pieces per size. For smaller quantities, please inquire about trial orders.
Note: All specifications are subject to change without notice. Please confirm with our technical team for your specific application. No specific certifications are claimed unless verified by official documents.
Send Inquiry to This Supplier
You May Also Like
-
Sintered Phenolic Resin Filter Element for Chemical Processing Liquid Filtration, 10 BarNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Cartridge 1μm, 250mm Length, 2.0MPa Burst PressureNegotiableMOQ: 1 Piece
-
0.5 Micron Sintered Phenolic Resin Filter Element for Liquid Filtration - 20 Bar Pressure Rating, 100°C Max TempNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Element for Liquid Filtration in Chemical Processing - Acid and Alkali Resistant, 10 MicronNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Cartridge for Liquid Filtration - 100% Pressure Tested, Standard Compliant, 0.5 MicronNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Element for Liquid Filtration With 1 Year Warranty and Mill Test Report IncludedNegotiableMOQ: 1 Piece
-
50 GPM Sintered Phenolic Resin Depth Filter Element With 304 Stainless Steel End Caps for Liquid FiltrationNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Cartridge, 10 Inch Length, 2.5 Inch OD, 1/4 NPT for Liquid FiltrationNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Element for Liquid Filtration - 1 Micron, 100°C Continuous, 20 Bar Burst PressureNegotiableMOQ: 1 Piece
-
Sintered Phenolic Resin Filter Element for Liquid Filtration - 5 Micron, 30 Inch, 10 Bar Working PressureNegotiableMOQ: 1 Piece
