Contact Platform Support
Help CenterFUNIK CBN Cutting Insert WNGA0804 WNMA0804 for Cast Iron & Hardened Steel
Product Spotlights
High machining efficiency
Excellent surface quality
Strong universality
Related Products
-
FUNIK CBN Cutting Insert SNGA1204 for Cast Iron & Hardened SteelUS$ 11 - 13.5MOQ: 10 Pieces -
FUNIK Cbn Turning Insert WNGA080404 WNGA080408 for Cast Iron & Hardened SteelUS$ 9.9 - 12MOQ: 10 Pieces
-
FUNIK Pcbn Brazed Insert WNGA0604 WNGA0804 for Cast Iron & Hardened SteelUS$ 19 - 21MOQ: 2 Pieces
-
FUNIK Brazed CBN Inserts TNGA1604 TNMA1604 for Gray Cast Iron & Hardened SteelUS$ 11 - 13.5MOQ: 10 Pieces
-
FUNIK Brazed PCBN Insert TNGA1604 WNGA0804 CNGA1204 DNGA1104 DNGA1504 VNGA1604 for Cast Iron & Hardened SteelUS$ 6.6 - 8MOQ: 10 Pieces
Product Description
FUNIK CBN inserts are widely used in processing pearlitic cast iron, high chromium and nickel alloy cast iron, hardened steel, powder metal, hard alloy and super alloy. In the mechanical machining application of the traditional system, not only it has greatly reduced the comprehensive production cost, but also significantly improved the production capacity and efficiency during the whole production operation, and the equipment investment is greatly decreased at the same time.
Our Advantages
√ Excellent cost performance
The service life of Funik CBN insert can be more than 10 times that of carbide insert and reduce the cost of comprehensive cutting tool by 30%-50%. The interval time between the replacements of Funik CBN insert is long and the insert replacement frequency is less, which can significantly reduce the cost on inserts.
√ High machining efficiency
The machining efficiency of Funik CBN insert is 5-10 times that of the carbide insert, which greatly improves the equipment capacity and reduces the fixed investment of equipment.
√ Excellent surface quality
Surface finish and dimensional precision of machining workpiece of Funik CBN insert can reach the grinding level, and make turning instead of grinding to reduce equipment investment.
√ Strong universality
Funik CBN insert can be used for both dry cutting and wet cutting and one grade normally is suitable for machining a variety of materials.
FBN Impact-resistant Solid Insert
FBS Brazed Solid Tip Insert
FBK Single-layer brazed Coated Insert
Manufacturing & Inspetion Process
Application
Funik CBN inserts are used for turning and milling of centrifugal rolls, slurry pumps, brake discs, brake drums, rolling mortar walls, compressor parts, gears, bearings, mining machinery, coal mining machinery industries.
Package & Shipping
Why Choose FUNIK
Send Inquiry to This Supplier
You May Also Like
-
FUNIK Brazed CBN PCBN Insert CNGA1204 CNMA1204 for Cast Iron & Hardened SteelUS$ 9.9 - 10.9MOQ: 10 Pieces
-
FUNIK Brazed PCBN Insert DNGA1104 DNGA1504 DNGA1506 for Cast Iron & Hardened SteelUS$ 11 - 13.5MOQ: 10 Pieces
-
FUNIK Brazed PCBN Insert VNGA1604 VNMA1604 for Cast Iron & Hardened SteelUS$ 11 - 13.5MOQ: 10 Pieces
-
Funik 63mm Polycrystalline Diamond Blank Round Pcd Blank PCD512W for WoodworkingUS$ 95 - 110MOQ: 1 Piece
-
Funik 63mm Pcd Blank PCD510 for Wood Stone Metal Cutting ToolsUS$ 95 - 110MOQ: 1 Piece
-
Funik Pcd Blank PCD532 for Wood Cutting ToolsUS$ 95 - 110MOQ: 1 Piece
-
Funik 63mm Pcd Cutting Tool Blank PCD810 for Low to Medium Content Aluminium AlloysUS$ 95 - 105MOQ: 1 Piece
-
China Pcd Blank Supplier PCD632 for Metal Cutting ToolsUS$ 105 - 120MOQ: 1 Piece
-
Funik 63mm Pcd Blank Manufacturer PCD685 for Milling and Rough Cutting of Aluminium AlloysUS$ 105 - 120MOQ: 1 Piece
-
China Pcd Cutting Tool Blank Company PCD605 for Cutting Aluminium AlloysUS$ 105 - 120MOQ: 1 Piece
