Baling Petrochemical 014u Solid Epoxy Resin With High Epoxy Equivalent
Bisphenol A-type solid epoxy resin belongs to basic epoxy resin, which is low-toxic, colorless or light yellow, and has a wide range of applications. It can be used in fields such as coatings, paints, and anti-corrosion.
CYD-011 Indicators: Epoxy equivalent g/eq (450 - 500), Hydrolyzable chlorine % (mass fraction) ≤ 0.10, Softening point (℃) 60 - 70, Dissolved viscosity (25℃) D - F, Volatile matter % (mass fraction) ≤ 0.60, Chromaticity (Gardner number) ≤ 0.5
CYD-012 Indicators: Epoxy equivalent g/eq (600 - 700), Hydrolyzable chlorine % (mass fraction) ≤ 0.10, Softening point (℃) 75 - 85, Dissolved viscosity (25℃) G - K, Volatile matter % (mass fraction) ≤ 0.60, Chromaticity (Gardner number) ≤ 0.5
CYD-014U Indicators: Epoxy equivalent g/eq (710 - 875), Hydrolyzable chlorine % (mass fraction) ≤ 0.10, Softening point (℃) 88 - 96, Dissolved viscosity (25℃) L - Q, Volatile matter % (mass fraction) ≤ 0.60, Chromaticity (Gardner number) ≤ 0.5
CYD-803U Indicators: Epoxy equivalent g/eq (730 - 840), Softening point (℃) 88 - 98, Dissolved viscosity (25℃) O - S, Chromaticity (Gardner number) ≤ 2
Solid epoxy resin and its supporting materials are packed in kraft paper bags lined with polypropylene film. Each bag is sealed with a thread, and the net weight of each bag is 25kg±0.25kg.
The main models and uses of CYD epoxy resin are as follows:
Baling Petrochemical Epoxy Resin Division [Introduction to Some Products] |
Bisphenol A type solid epoxy resin |
Technical indicators |
| Serial No. Brand Epoxy equivalent, (g/mol) Hydrolyzable chlorine, % (mass fraction) ≤ Softening point, (℃) Dissolution viscosity, (25℃) Volatile matter, ﹪ (mass fraction) ≤﹪ Chromaticity, (Gardner method) ≤ Note Explanation 1 CYD - 011 450~500 0.10 60~70 D~F 0.6 0.5 Standard resin 2 CYD - 012 600~700 0.10 75~85 G~K 0.6 0.5 For high - leveling powder coatings 3 CYD - 013 700~800 0.15 85~95 L~Q 0.6 0.5 For powder coatings 4 CYD - 014 900~1000 0.10 91~102 Q~V 0.6 0.5 For powder coatings and epoxy esters 5 CYD - 014U 710~875 0.10 88~96 L~Q 0.6 0.5 For powder coatings
|
Product packaging, storage and transportation |
The product is packed in high-pressure low-density polyethylene bags, and the net content per bag is generally 25kg±0.25kg. It can also be packed according to the user's requirements. |
The product should be stored in a warehouse with good ventilation and dry conditions, where the temperature is kept below 40℃. It should be protected from direct sunlight, and damage, contamination, and moisture should be avoided. |
During the transportation of the product, covered transportation tools should be used to prevent rain, moisture, and sun exposure, ensure that the packaging containers do not leak, and meet the requirements of the transportation department. |
Send Inquiry to This Supplier
You May Also Like
-
Supply of Hunan 191 Unsaturated Polyester ResinNegotiableMOQ: 0
-
Supply of Bisphenol a 197 Unsaturated Resin, an Anti-corrosion Material From HunanUS$ 2.54 - 2.62MOQ: 220 Kilograms
-
Supply of Ultrafine Silica (white Carbon Black, Light Powder) From HunanUS$ 1.54 - 1.69MOQ: 100 Kilograms
-
Factory Direct Supply of Vegf Vinyl Resin Primer for Steel Structure Anti - CorrosionUS$ 4.23 - 4.31MOQ: 100 Kilograms
-
Wholesale of Aluminum Hydroxide From Zhongzhou Aluminum IndustryNegotiableMOQ: 0 Ton
-
High - Whiteness and High - Hardness Quartz Sand and Quartz Powder From HunanNegotiableMOQ: 0 Ton
-
Vegf Vinyl Resin Green Anti-corrosion Topcoat in StockUS$ 4.15 - 4.31MOQ: 100 Kilograms
-
Hunan Fiberglass Resin AcceleratorNegotiableMOQ: 0 Kilogram
-
Special Anti - Corrosion Cast Stone Powder for Epoxy Resin Pasting Acid - Resistant BricksNegotiableMOQ: 0 Ton
-
Supply of 400-mesh Waterproof Talc Powder of Osmanthus Brand From HunanNegotiableMOQ: 0 Ton


