Contact Platform Support
Help CenterASTM D3954 Automatic Dropping Point of Waxes Tester
Product Spotlights
Related Products
-
ASTM D3954 Dropping Point of Waxes TesterUS$ 1800 - 2000MOQ: 1 Set -
NF T60-185 CNOMO D65 5212 Metalworking Fluid Anti-Foaming TesterUS$ 4800 - 5200MOQ: 1 Set
-
ASTM D5453 Total Sulfur Content Analyzer Ultraviolet FluorescenceUS$ 22000 - 24000MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity TesterUS$ 10000 - 11000MOQ: 1 Set
-
EN14112 Auto Biodiesel Oxidation Stability Tester Rancimat MethodUS$ 15000 - 16000MOQ: 1 Set
Automatic Dropping Point of Waxes Tester
ASTM D3954
Product Model: JF0800Z
Product Introduction
This instrument is suitable for detecting the dropping point of waxes. The instrument uses touch LCD screen automatic control, automatic results, easy to operate. This instrument is suitable for testing paraffin waxes, microcrystalline wax, polyethylene wax, blended wax and natural wax, including all non-liquid wax drops.
The test principle is that the sample is placed in the cup and heated in the air at a constant rate. When the sample suspended at the bottom of the cup flows down 19mm, the temperature when the photoelectric detection beam is interrupted is the drop point of the sample.
Technical Parameter
1. Applicable standard: ASTM D3954, SH/T0800
2. Temperature control range: 25℃～300℃
3. Temperature control accuracy: 0.1℃
4. Detection method: Automatic test, automatic result
5. Display mode: LCD touch screen display
6. Cooling method: Forced air cooling
7. Heating method: Heat pipe heating
8. Working unit: 1 unit
9. Working power supply: AC220,240V 50,60HZ
10. Instrument size: 550*300*600mm
11. Net weight: 30KG
12. HS Code: 9027899090
Main Feature
1. Touch LCD control, can operate directly on LCD screen.
2. Metal bath heating, quick heating and easy operation.
3. Automatically detect the dropping point of the sample, no need for a special person to monitor the experimental process, and automatically notify after the end of the experiment.
4. High-precision sensor, which can capture the process of dropping and obtain experimental results in time.
5. Using the touch screen display, the reading is clear and the operation is convenient.
6. Use high-precision PT100 temperature sensor, with high measurement accuracy, ±0.1°C.
7. With over temperature limit function.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D1264 Lubricating Grease Water Washout Characteristics TesterUS$ 3500 - 4000MOQ: 1 Set
-
ASTM D2112 Automatic Lubricant Oxidation Stability Tester RPVOT Method--Oil Bath RBOTUS$ 8000 - 8200MOQ: 1 Set
-
ASTM D217 Cone Penetration of Lubricating Grease TesterUS$ 1400 - 1500MOQ: 1 Set
-
ASTM D2266 D2596 D2783 D4172 Auto Lubricant Anti-Wear Performance Tester Four-Ball Wear Test MachineUS$ 15000 - 16000MOQ: 1 Set
-
ASTM D2265 ISO6299 Over Wide Temperature Range Dropping Point of Lubricating Grease TesterUS$ 1350 - 1400MOQ: 1 Set
-
ASTM D566 ISO2176 NFT60102 DIN51801 Automatic Dropping Point of Lubricating Grease TesterUS$ 7800 - 8500MOQ: 1 Set
-
ASTM D2602 D5293 Automatic CCS Cold Cranking Simulator Apparent Viscosity of Engine Oils Tester 12 Test UnitsUS$ 28000 - 30000MOQ: 1 Set
-
ASTM D1401 Petroleum Oil and Synthetic Fluids Water Separability Tester Demulsibility Characteristics AnalyzerUS$ 2500 - 2800MOQ: 1 Set
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils TesterUS$ 3600 - 4200MOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils TesterUS$ 3500 - 3800MOQ: 1 Set
