Contact Platform Support
Help CenterEN14112 Auto Biodiesel Oxidation Stability Tester Rancimat Method
Product Spotlights
Related Products
-
ASTM D1264 Lubricating Grease Water Washout Characteristics TesterUS$ 3500 - 4000MOQ: 1 Set -
ASTM D611 ISO2977 Automatic Petroleum Products Aniline Point TesterUS$ 15000 - 16800MOQ: 1 Unit
-
Methanol Fuel Additive Aluminum Sheet Anti-Corrosive Performance TesterUS$ 23000 - 25000MOQ: 1 Unit
-
IP227 Jet Fuel Silver Strip Corrosion TesterUS$ 3000 - 3900MOQ: 1 Unit
-
ASTM D5452 Particulate Contaminant in Aviation Fuel TesterUS$ 810 - 900MOQ: 1 Unit
EN14112 Auto Biodiesel Oxidation Stability Tester Rancimat Method
Product Model: JF14112D
Product Introduction
The oil oxidation stability measuring instrument developed by our company can quickly, accurately and intuitively determine the oxidation stability of oil, providing effective scientific basis for relevant departments and enterprises to study the processing, use and storage of oil, the selection of oil for food production, the use of antioxidants and adjuvants, and the oxidation stability research of fatty acid methyl ester FAME for environmental vehicle fuel oil.
Technical Parameter
1. Applicable standards: ISO 6886, EN 14112, EN15751, EN16568
NB/SH/T0873, NB/SH/T0825, GB/T21121
2. Flow range: 8 ~ 12L/h
3. Flow accuracy: ±10%
4. Test range: 0 ~ 800 μS/cm
5. Resolution: 0.1μS/cm
6. Gas source: Special diaphragm pump 12L/H
7. Temperature control mode: Electric heating rod
8. Working temperature: 50 ~ 220℃
9. Temperature control accuracy: ±0.1℃
10. Result processing: Automatic measurement, storage
11. Display mode: Curve/digital two modes
12. Unit of work: 4 tubes
13. Power rate: 1100W
14. Working power supply: AC220V±10%, 50HZ
15. HS Code: 9027899090
Main Feature
1. The software automatically records the change curve of electrical conductivity, and judges the induction inflection point by calculating the second derivative of the curve;
2. After the test, the result induced response time and the test process curve will be stored in the database for query;
3. In addition to measuring the induced response time, the software also allows the evaluation of the so-called stability time, that is, the time required for the conductivity to reach a certain value;
4. The software can also reevaluate each test curve. By setting the evaluation time range, select a section of the curve for evaluation, so as to avoid some abnormal sections of data caused by cleaning, sample or other reasons;
5. The database can store all the data related to the test, including conductivity curve, induction response time, method used, test start and stop time, etc.
6. Test data can be queried by setting query conditions;
7. In addition, the software also has the function of multi-curve comparison and curve analysis;
8. Temperature and flow can be calibrated by testing software;
9. Each sample is controlled separately and can be set automatically according to requirements.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D664 ASTM D2896 Auto Petroleum Product Total Acid and Base Value Tester (Potentiometric Titration Method)US$ 7500 - 8000MOQ: 1 Unit
-
ASTM D1500 Auto Petroleum Product ColorimeterUS$ 1000 - 1200MOQ: 1 Unit
-
Petroleum Products Electric Furnace Carbon Residue TesterUS$ 900 - 1000MOQ: 1 Unit
-
ASTM D2274 Oxidation Stability of Distillate Fuel Oil Tester Accelerated MethodUS$ 5100 - 5500MOQ: 1 Unit
-
ASTM D1657 Density or Relative Density of Liquefied Petroleum Gas TesterUS$ 2800 - 3200MOQ: 1 Unit
-
ASTM D2420 Hydrogen Sulfide in Liquefied Petroleum Gases TesterUS$ 2700 - 3200MOQ: 1 Unit
-
ASTM D4377 Automatic Digital Display Trace Moisture Tester (Karl Fischer Method) Coulometric TitrationUS$ 4000 - 5000MOQ: 1 Unit
-
ASTM D6371 Cold Filter Plugging Point of Diesel Fuel Tester CFPPUS$ 1800 - 2100MOQ: 1 Unit
-
ASTM D6371 Auto Cold Filter Plugging Point of Diesel Fuel Tester CFPPUS$ 8000 - 9000MOQ: 1 Unit
-
Petroleum Products Water Soluble Acid and Alkali Tester Acidity MeterUS$ 700 - 780MOQ: 1 Unit
