Contact Platform Support
Help CenterSupply of Yike Dbnl3-150 Low-noise Circular Counterflow Frp Cooling Tower
Related Products
-
Professional Production of Bhq-c Yike 200*150 and 300*150 Fiberglass Cable TraysUS$ 8.46 - 8.92MOQ: 100 Meters -
Professional Supply of Bhq Series 300*150 Frp Cable TraysUS$ 8.46 - 8.92MOQ: 100 Meters
-
Supply of Yike Bhq-c-1a Frp Trough Cable TrayUS$ 8.15 - 8.46MOQ: 100 Meters
-
Factory Supply 200*150 Type Frp Trough Straight Cable TrayUS$ 6.62 - 6.92MOQ: 100 Meters
-
Supply of Frp Hydrochloric Acid Storage Tanks, Dilute Acid Tanks, and Frp Acid Storage TanksUS$ 9228.92 - 9230.77MOQ: 1 Piece
Our company is a professional manufacturer engaged in the research and production of FRP products. It has a long history in the production of FRP cooling towers. Over the years, it has jointly developed 40 series and hundreds of products with Shanghai Jiao Tong University, the Fourth Design and Research Institute of the Ministry of Machinery Industry, and Tsinghua University. These products are sold all over the country and are well - received by customers for their reliable quality, high - quality service, and good reputation.The cooling towers produced by our company feature high cooling efficiency, low power consumption, small water splash, low noise, corrosion resistance, stable operation, light weight, high strength, small footprint, easy disassembly and assembly, and long service life. The product quality meets the nationalGB7190—97 standard. Our company has a professional cooling tower production workshop. From the entry of raw materials, the preparation of resin glue, pasting, curing, demolding, finishing to inspection, more than a dozen quality control points have been established for each process. There are dedicated quality inspection personnel to supervise and inspect each process, which effectively guarantees the quality of the manufactured products.
Manufacturing, installation and acceptance standards for our company's FRP cooling tower products:
GB7190.2—1997 "Fiber - Reinforced Plastic Cooling Towers" GBJ102---87 "Design Code for Industrial Recirculating Water Cooling Towers"
DL/T742—2001 "Technical Conditions for Plastic Components of Cooling Towers" HG20522---92 "Design Regulations for Cooling Towers in Chemical Enterprises" GB/T50102-2003 "Design Code for Industrial Recirculating Water Cooling"
Notes for installation, commissioning and use of FRP cooling towers:
1、The basic drawings and installation dimensions in this manual are for reference during installation.
The direction of the inlet and outlet pipes of the small counterflow tower can be arbitrarily selected in the horizontal position, but it shall not collide with the foundation. For the foundation in the middle, its load should be 25%, and the remaining 75% shall be evenly borne by the peripheral rectangular foundation. If it is installed on the roof, the additional pressure caused by the load should be considered.
2、A support should be installed at the connection between the cooling tower and the inlet and outlet pipes to prevent excessive weight from pressing on the tower wall.
3、The fan blades should be adjusted before installation and use to keep the angles consistent. The method is to make a mark on the front and rear edges of each blade at a distance of 150 millimeters from the blade tip. Then measure the distances from the front and rear edges of each blade from the lower chord of the support respectively to calculate the height difference between the front and rear edges of each blade at this point. After several adjustments, it is qualified when the height differences are consistent.
4、After wiring the motor, seal the junction box and ensure that the current test value does not exceed the rated current of the motor.
5、When starting the cooling tower, always turn on the water pump first and then the fan. It is not allowed to run the fan without water spraying. The fan can be reversed at a low speed for a short time to remove ice.
6、The reducer should be filled with oil before use. 50-grade anti - wear gear oil or engine oil can be used for lubrication. The oil should be replaced after the initial operation of 100 - 300 hours, and then replaced every 3000 - 5000 hours. The oil level should be appropriate, and the oil level gauge should be easy to observe.
7、When the cooling tower is in operation, it should be managed by a dedicated person. Always pay attention to the changes in current and water temperature, and regularly inspect the motor, reducer, water distributor, etc.
Send Inquiry to This Supplier
You May Also Like
-
Supply 400*200 and 400*150 Ladder-type Frp Cable Trays and Trough-type Frp Cable TraysUS$ 11.85 - 12.31MOQ: 100 Meters
-
Supply 200*100 and 200*150 Frp Trough Cable TraysUS$ 5.08 - 5.38MOQ: 30 Meters
-
100*100 and 200*100 Frp Cable Trays, Trough-type Cable BoxesUS$ 5.08 - 5.38MOQ: 30 Meters
-
Trough-type Frp Cable Tray. High-quality Supply From Frp Cable Tray Manufacturers in HebeiUS$ 4.62MOQ: 1 Meter
-
Factory Direct Sales of Yike Brand Circular Counterflow Frp Cooling Towers - Square Frp Counterflow Cooling TowersUS$ 1230.62 - 1230.77MOQ: 1 Unit
-
Trough-type Fiberglass Cable Trays: 400*200, 500*100 Fiberglass Cable TraysUS$ 4.62MOQ: 1 Meter
-
【high-quality Glass Cable Tray】jizhou Yike Frp Co., Ltd.US$ 4.62MOQ: 1 Meter
-
Corrosion-resistant Frp Cable Tray, Frp Cable Tray for Chemical PlantsUS$ 4.62MOQ: 1 Meter
-
Top Ten Brands of Frp Cable Trays. Recommended Frp Cable Tray ManufacturersUS$ 4.62MOQ: 1 Meter
-
Specifications, Parameters, Prices, and Manufacturers of Hebei Hengshui Xqj-t Type Ladder Cable TraysUS$ 4.62MOQ: 1 Meter
