The Saman Mobile Screw Air Compressors Can be Divided Into Diesel Mobile Screw Air Compressors and Electric Mobile Screw Air Compressors.
Product Spotlights
The mobile screw air compressors are classified based on six dimensions: drive method, lubrication form, pressure/flow rate, moving structure, cooling method, and number of compression stages. The core classification is diesel/electric, fuel injection/oil-free, single-stage/double-stage, air-cooled/water-cooled, tractor-type/vehicle-mounted type, suitable for scenarios without fixed air sources such as in the wild, construction sites, and mines.
1. By drive method (the most mainstream classification)
1) Diesel-driven mobile (Diesel)
Core: Diesel engine + screw compressor, self-powered, no need for grid power.
Features: Independent power supply, strong off-road capability, all-weather operation; power 15–600HP, air volume 3–40m³/min, pressure 7–25bar.
Applications: Mines, tunnels, field exploration, remote construction sites (without grid power).
Representatives: Cummins / Yuchai Power, Euro V emission standards, stable operation from -15℃ to 46℃.
Diesel-powered mobile screw air compressor
2) Electrically-powered mobile (electric)
Core: Three-phase motor (380V) + screw main unit, requires external power supply.
Features: Low cost, low noise, low emissions, easy maintenance; power 7.5–160kW, exhaust volume 1–25m³/min, pressure 7–13bar.
Applications: Urban infrastructure, factory relocation, temporary projects (with mains electricity).
Representative: IP55 protection motor, permanent magnet variable frequency (VSD) energy-saving by 30%+.
Electrically-driven mobile screw air compressor
II. According to lubrication method (air quality is the key factor)
1) Oil-injected screw (oil lubrication, mainstream)
Principle: Special lubricating oil is sprayed into the compression chamber to cool, seal, and lubricate the rotor.
Features: High efficiency, low cost, durable; exhaust contains 3–5 ppm of oil, requires three filters for maintenance.
Applications: General pneumatic tools, sandblasting, spraying, mining machinery.
2) Oil-free screw (dry / water lubrication)
Principle: The rotor is lubricated without contact and without oil (synchronous timing gears), with 0-grade oil-free compressed air.
Features: Clean air, no oil pollution; high price, requires multiple stages of compression and cooling.
Applications: Food, medicine, electronics, precision coating, chemical processes.
Oil-free mobile screw air compressor
III. By number of compression stages (pressure / efficiency)
1) Single-stage compression (conventional)
Structure: One pair of male and female rotors for one compression cycle, pressure 7–13 bar, high efficiency, simple structure.
Applicable to: 80% of engineering scenarios (pressure ≤ 13 bar).
2) Double-stage compression (high pressure / energy saving)
Structure: High and low pressure rotors connected in series, with intermediate cooling, pressure 18–35 bar, 15–25% more energy-efficient than single-stage.
Applicable to: well drilling, high-pressure pile breaking, deep-sea operations, mine blasting.
Two-stage compression mobile screw air compressor
IV. According to mobile structure (mobility)
1) Tractor type (two-wheel / four-wheel traction, mainstream)
Structure: chassis + off-road tires + traction rods, can be towed by trucks / tractors, speed ≤ 80 km/h.
Features: Flexible transfer, strong off-road capability, suitable for construction sites / mines.
Classification:
Two-wheel light type: 7.5–22 kW, single axle, suitable for short-distance movement.
Four-wheel heavy type: 37–160 kW, double axle, stable load-bearing, suitable for long-distance / complex road conditions.
2) Vehicle-mounted type (trucks' chassis integration)
Structure: air compressor + diesel / electric motor + control system integrated into the truck chassis, with built-in driving power.
Features: Fast transfer, no need for towing, suitable for frequent movement / remote operations.
Applications: Road emergency repairs, emergency rescue, mobile gas supply stations.
Mobile and Portable Screw Compressors
3) Portable (small wheeled / hand-pushed)
Structure: Small main unit + storage tank + small casters, power ≤ 15kW, single person can push.
Features: Compact and lightweight, flexible for indoor use, suitable for small projects / decoration.
Five. According to cooling method (environmental adaptation)
1) Air-cooled (mainstream, 90% of models)
Principle: Fan + finned heat exchanger, air convection cooling, no water source required.
Features: Simple structure, no scale formation, suitable for water shortage / outdoor conditions, -15℃ ~ 46℃ usable.
2) Water-cooled (large / high-temperature scenarios)
Principle: Cooling water circulation + water cooler, high heat dissipation efficiency, suitable for high temperature / high-load conditions.
Features: Requires external water source / cooling tower, large volume, suitable for fixed mobile points / high-temperature mines.
Six. According to exhaust pressure / flow rate (matching of working conditions)
Pressure classification
Low pressure: 0.7–1.0MPa (7–10bar), general engineering.
Medium pressure: 1.2–2.5MPa (12–25bar), drilling / pile driving.
High pressure: 2.5–3.5MPa (25–35bar), mining blasting / deep-sea operations.
Flow rate classification
Small: 1–6m³/min, 7.5–22kW, hand-pushed / two-wheel.
Medium: 6–15m³/min, 37–75kW, four-wheel traction.
Large: 15–40m³/min, 90–160kW, four-wheel / mobile vehicle.
Seven. Other special types
Permanent magnet variable speed (VSD): Electric model with permanent magnet motor, 10–100% stepless speed regulation, energy saving by 30%+, suitable for fluctuating gas usage.
Silent type: Fully enclosed soundproof cover, noise ≤ 72dB, suitable for urban / residential area operations.
Explosion-proof type: Entire machine explosion-proof design, suitable for petroleum / chemical / flammable and explosive environments.
Selection quick-reference table (by scenario) Table
Scene Recommendation Type Key Parameters
Outdoor mines / tunnels Steam engine + fuel injection + single stage + air cooling + four wheels 10–25m³/min, 10–13bar
Urban infrastructure / decoration Electric + fuel injection + single stage / double stage + air cooling + two wheels 3–6m³/min, 7–8bar
Food / medicine / precision Electric + oil-free + single stage / double stage + air cooling 1–10m³/min, 7–10bar, 0th level oil-free
High-pressure drilling / pile breaking Steam engine + fuel injection + double stage + air cooling + four wheels 5–15m³/min, 18–25bar
Temporary emergency / repair Portable + steam engine + single stage + air cooling 6–12m³/min, 10bar
Send Inquiry to This Supplier
You May Also Like
-
MA-10A Saman Screw-type Air CompressorNegotiableMOQ: 1 Piece
-
Saman Permanent Magnet Variable-frequency Screw Air Compressor MV-20A is Energy-saving and Environmentally Friendly.NegotiableMOQ: 1 Piece
-
Saman MV-30A Permanent Magnet Variable Frequency Screw Air Compressor - Energy-saving and Environmentally FriendlyNegotiableMOQ: 1 Piece
-
Saman Screw Permanent Magnet Variable-frequency Air Compressor, With Low Rotational Speed and High EfficiencyNegotiableMOQ: 1 Piece
-
Saman Screw Air Compressor, With Low Rotational Speed and High EfficiencyNegotiableMOQ: 1 Piece
-
Saman Screw Compressor, High Efficiency, Energy-saving and Environmentally Friendly, Low NoiseNegotiableMOQ: 1 Piece
-
Saman Screw Air Compressor With Permanent Magnet Variable Frequency Technology is Energy-saving and Environmentally Friendly.NegotiableMOQ: 1 Piece
-
Saman Screw Air Compressor, Highly Efficient and Energy-saving, Quiet and Environmentally FriendlyNegotiableMOQ: 1 Piece
-
Saman Screw Air Compressor, Permanent Magnet Variable Frequency Air Compressor, Mobile Screw Air CompressorNegotiableMOQ: 1 Piece
-
The Saman Screw-type Air Compressor Starts Smoothly Without Any Shock.NegotiableMOQ: 1 Piece




