Contact Platform Support
Help CenterDeoxidizing Aluminum Biscuits for Steelmaking and Copper Casting in Hubei, Used in Steel Mills, Aluminum Biscuits for Steel Deoxidization, Aluminum Alloy Additives for Smelting
Related Products
-
Large-scale Production of Cast Steel and Cast Iron, Deoxidized Aluminum Blocks With 96% or 99% Aluminum ContentNegotiableMOQ: 0 Ton -
Aluminum Cakes for Steelmaking Deoxidation in Panzhihua, Sichuan, Aluminum Blocks for Steel Casting and Steelmaking Deoxidation, Aluminum Alloy Additives for Smelting Aluminum CakesNegotiableMOQ: 0 Ton
-
Steel Shot Deoxidized Aluminum Cake / Cast Steel With 96% Aluminum Content / Deoxidized Aluminum Cake With 99% ContentNegotiableMOQ: 0 Ton
-
Deoxidizing Aluminum Biscuits for Steelmaking and Ironmaking in Yunnan, Used in Steel Plants, Aluminum Alloy Additive for Smelting Aluminum BiscuitsNegotiableMOQ: 0 Ton
-
Solutions for Deoxidizing Aluminum Cakes in Steel Casting Plants and Problems Such as Slag Inclusion, Blowholes, and Pinholes in Steel CastingsNegotiableMOQ: 0 Ton
In steelmaking production, using aluminum for deoxidation can effectively reduce the oxygen content, minimize the formation of bubbles due to the carbon-oxygen reaction, and at the same time refine the grain structure of the steel, thereby improving the impact toughness of the steel and reducing the tendency of cold brittleness and aging. Since the specific gravity of aluminum (2.7g/cm) is much lower than that of molten steel (7.6g/cm3) and steel slag (about 3.59/cm3), and it is extremely easy to oxidize in air and steel slag. Especially when used for deoxidation in converter steelmaking, aluminum floats on the surface of the molten steel, resulting in high burning loss and low yield. Therefore, in actual production, deoxidizers containing aluminum are often used for deoxidation. They have the characteristics of easily penetrating the slag layer of the molten steel, having a high melting point of about 1280℃, being difficult to melt in the slag layer of the molten steel, and being able to reach the deep layer of the molten steel for melting and deoxidation. When used for deoxidation and alloying of molten steel, their density is between that of molten steel and steel slag, which can effectively improve the utilization rate of aluminum. In addition to the low carbon content playing a good role in inhibiting the carburization of molten steel, aluminum cakes are easy to store and can be added using a hopper, which not only simplifies the deoxidation and alloying process of molten steel but also reduces the labor intensity of workers.
Zhongshan Tefa Hardware Products Co., Ltd. produces and supplies a large quantity of deoxidizing aluminum blocks/cakes for steelmaking, which can be customized according to size:
1: The content of metallic aluminum can be selected and processed between 95%-96%-97%-98%-99.7%;
2: It melts quickly after being put into the molten steel, and the molten steel is evenly deoxidized under force;
3: It is not easy to float up after sinking into the molten steel, which shortens the deoxidation reaction time and improves the yield of metallic aluminum.
4: It is suitable for ladle refining and molten steel purification of various types of steel.
Metallic aluminum is a commonly used deoxidizer for molten steel in steelmaking production. Some steel mills directly put 5 - 10 kg aluminum ingots into the ladle for deoxidation. In actual production, due to the large size and slow melting of aluminum ingots, uneven deoxidation causes waste of raw materials and prolongs the refining time.
Adding circular aluminum cakes for deoxidation belongs to precipitation deoxidation. During precipitation deoxidation, the aluminum alloy is directly added to the molten steel to remove oxygen from the molten steel. This deoxidation method has relatively high deoxidation efficiency, short time consumption, and less alloy consumption.
Advantages of circular aluminum cake deoxidation:
1: The circular arc shape improves the sliding performance between deoxidizing blocks, facilitating the smooth feeding from the silo;
2: It melts quickly after being put into the molten steel, and the molten steel is evenly deoxidized under force;
3: It is not easy to float up after sinking into the molten steel, which shortens the deoxidation reaction time and improves the yield of metallic aluminum.
4: Suitable for the purification of molten steel in ladle refining of various steels.
Send Inquiry to This Supplier
You May Also Like
-
Deoxidizing Aluminum Cake With 96% Aluminum Content or 99% Aluminum Content From Hunan Steel FoundryNegotiableMOQ: 0 Ton
-
Deoxidizing Aluminum Balls for Steelmaking and Copper Casting in Guangxi, Deoxidizing Aluminum Balls for Steelmaking Used in Steel Plants, Aluminum Alloy Additive Smelting Aluminum BallsNegotiableMOQ: 0 Ton
-
Deoxidizing Aluminum Blocks for Steel Mills / Aluminum-iron Blocks for SteelmakingNegotiableMOQ: 0 Ton
-
99.7 High-purity Aluminum Granules / Deoxidizing Aluminum Granules From Guangdong, China / Aluminum Bead Granules as Metal Reducing Agent in SmeltersNegotiableMOQ: 0 Ton
-
Deoxidizing Steel - Cored Aluminum Cakes for Steel - Making and Iron - Smelting in Guangdong, Deoxidizing Steel - Cored Aluminum Blocks for Steel - Making in Steel PlantsNegotiableMOQ: 0 Ton
-
99.9 High-purity Aluminum Granules / Deoxidizing Aluminum Granules / Aluminum Bead Granules as Metal Reducing Agent for Smelting PlantsNegotiableMOQ: 0 Ton
-
Deoxidized Aluminum Granules and Metallic Aluminum Powder From a Foundry in Guangdong, With a Diameter of 0.1 - 0.3mmNegotiableMOQ: 0 Ton
-
Guangdong Aluminum Ingot Cut Square Aluminum Blocks, Deoxidizing Materials for Cast Steel/ Molten Steel/ CastingNegotiableMOQ: 0 Ton
-
500g Steelmaking Aluminum Blocks / 600g Deoxidizing Aluminum Blocks for Steelmaking in Steel Mills / Semi-circular Deoxidizing Aluminum BlocksNegotiableMOQ: 0 Ton
-
100g/piece Steel Ladle Deep Deoxidation Aluminum Block/high Purity Cylindrical Deoxidation Aluminum Block/aluminum Block Cut From Aluminum Rod With 99.5% Aluminum ContentNegotiableMOQ: 0