Contact Platform Support
Help Center316 Stainless Steel Laser-cut U-shaped Card Slot, Profile Cutting and Bending
Related Products
-
Laser-cut and Hollowed-out Filter Mesh With High-precision HolesNegotiableMOQ: 0 -
Laser Cutting of Stainless Steel Sheets | Customized Hollow Carved Kitchenware Panels / Decorative LatticeworkNegotiableMOQ: 0
-
Extra-large Format Laser Cutting Factory | 3m × 1.5m Sheet Metal Full Sheet ProcessingNegotiableMOQ: 0
-
Laser Cutting of Stainless Steel Composite Plates | Integrated Processing of Multi-layer MaterialsNegotiableMOQ: 0
-
7075 Aviation Aluminum Laser Cutting | High-strength Aluminum Parts Precision MachiningUS$ 1.54MOQ: 1 Piece
316 Stainless Steel Laser-Cut U-shaped Card Slot | Integrated Processing of Profile Cutting and Bending
Hello, everyone! Recently, many customers have inquired about the processing of U-shaped card slots. Some are for making pipe supports, some are for equipment fixing, and some are for decoration projects. Today, let's specifically talk about how the 316 stainless steel U-shaped card slot is made and the advantages of our integrated processing.
1. Why use 316 stainless steel to make U-shaped card slots?
316 stainless steel can be regarded as an "excellent student" among stainless steels. It is more corrosion-resistant than the commonly used 304, especially in the following environments:
Humid environment: Seaside, outdoors, basements
Acid-base environment: Chemical industry, sewage treatment
High-temperature environment: Boilers, outdoor air conditioners
Food and medical: Occasions with high hygiene requirements
Comparison between 316 and 304:
| Performance | 304 Stainless Steel | 316 Stainless Steel |
|---|---|---|
| Corrosion resistance | Ordinary | Excellent |
| High-temperature resistance | About 800℃ | About 900℃ |
| Cost | Lower | Slightly higher |
| Applicable scenarios | Ordinary indoor environment | Outdoor, humid, acid-base environments |
Although 316 is a bit more expensive, it has a longer service life and lower maintenance costs. In general, it is more cost-effective!
2. Where are U-shaped card slots used?
Don't underestimate the simple structure of the U-shaped card slot. It has many uses:
Pipe installation:
Fixing of air-conditioning pipelines
Firefighting pipe supports
Lifting of industrial water pipes
Fixing of cable trays
Equipment fixing:
Base of mechanical equipment
Electrical cabinet installation
Automation equipment support
Wiring for chassis and cabinets
Architectural decoration:
Curtain wall keel buckle
Indoor decoration finishing
Display shelf accessories
Automobiles and motorcycles:
Pipeline fixing clip
Exhaust pipe clamp
3. What are the advantages of laser-cut U-shaped slots?
In the past, when making U-shaped slots, either stamping or welding was used, and there were a bunch of drawbacks:
| Traditional process | Advantages of laser cutting |
|---|---|
| Mold opening is required | No mold needed, directly cut from CAD drawings |
| Can only be done in batches | Orders start from 1 piece, flexible |
| There are burrs on the cut | Smooth cut |
| General accuracy | Accuracy ±0.05mm |
| Long construction period | Sample available in 24 hours, batches in 3 - 5 days |
Core advantages of laser cutting:
✅ One-time forming: The shape of the slot is cut at one time without multiple processes
✅ High precision: Accurate dimensions, no gaps during assembly
✅ No burrs: Neat cut, no need for grinding
✅ Complex shapes: Angles, holes, and slots can all be done at once
✅ High material utilization rate: Optimized layout, saving materials
4. Integrated cutting and bending, more worry-free!
Many customers used to have this problem: finding one company for cutting and another for bending, which was time-consuming and costly.
Our laser cutting + bending integration can complete the process from drawing to finished product at one time!
Benefits of integrated processing:
More accurate dimensions: Bending angle error ≤±1°
Avoid error accumulation: No need for multiple clamping
Faster delivery: One less trip to the factory
Lower cost: Save on secondary transportation and processing fees
Quality controllable: We are responsible throughout the process, so you don't have to take the blame
5. Specifications we can process
| Parameter | Range |
|---|---|
| Material thickness | 0.5mm～6mm |
| Processing size | 1500×3000mm |
| U-shaped groove width | 5mm～200mm |
| Minimum bending angle | 15° |
| Accuracy | ±0.05mm |
We can make U-shaped card slots, U-shaped clips, pipe clamps, and hoops of various specifications!
6. Sharing of typical cases
Case 1: U-shaped card slot for air-conditioning pipes
Material: 2mm 316 stainless steel
Quantity: 5000 sets
Process: Laser cutting + bending + punching
Delivery time: 4 days
Customer evaluation: The size is just right, and the installation passed at one time
Case 2: Chemical pipeline support
Material: 3mm 316 stainless steel
Quantity: 200 pieces
Features: With reinforcing ribs, corrosion-resistant
Customer evaluation: It has been used in a seaside project for two years without any problems
Case 3: U-shaped clip for equipment fixation
Material: 1.5mm 304 stainless steel (upgraded to 316)
Quantity: 1000 pieces
Process: Cutting + bending + welding
Customer review: The quality is much better than the finished products I bought before.
7. Frequently Asked Questions
Q: Is it more difficult to cut 316 stainless steel?
A: It's a bit more difficult than 304, but we have experienced masters and mature processes, so we can cut it perfectly!
Q: How do you quote for the U-shaped card slot?
A: It mainly depends on the material thickness, size, quantity, and process complexity. Send me the drawings, and I'll help you evaluate.
Q: Can you make samples?
A: Of course! Free sample making. We'll start mass production after confirmation.
Q: What's the minimum order quantity?
A: We can start from 1 piece! Small-batch customization is no problem.
8. Our Service Guarantee
| Service Item | Promise |
|---|---|
| Sample Making | Free, available within 24 hours |
| Precision | ±0.05mm |
| Delivery Time | 3 - 5 days for bulk orders |
| Urgent Order | Respond within 48 hours |
| Quality Inspection | Inspect each piece and ship only qualified products |
| After-sales Service | Replace or refund for any problems |
9. Summary
The core features of the 316 stainless steel U-shaped card slot are:
Corrosion resistance + High precision + Integrated processing + Fast delivery
Whether it's for pipe supports, equipment fixing, or decoration projects, we can help you solve the problems!
Send Inquiry to This Supplier
You May Also Like
-
Mirror Stainless Steel Laser Cutting | Decorative Parts Processing, Scratch-free and Burr-freeNegotiableMOQ: 0
-
201 and 304 Stainless Steel Laser Cutting | Decorative Plate Carving, Low-cost CustomizationNegotiableMOQ: 0
-
Laser Cutting of Copper and Aluminum Sheets | Bulk Processing Offers Better Discounts. Tolerance ≤ ±0.1mmNegotiableMOQ: 0
-
Hardware Sheet Metal Laser Cutting Manufacturer - Stainless Steel / Aluminum / Copper Processing, Free DesignNegotiableMOQ: 0
-
Which Company is the Best for Laser Cutting Processing in Dongguan? Guangye Metal, Precision is KingNegotiableMOQ: 0
-
Laser-cut Sheet Metal Parts | Stainless Steel / Aluminum / Copper. Free Design and Sample MakingNegotiableMOQ: 0
-
One-stop Service for Laser Cutting, Bending and Welding | Direct Supply From Sheet Metal Processing ManufacturerUS$ 1.54MOQ: 1 Piece
-
Galvanized Sheet Laser Cutting | Rust-proof Sheet Processing, Customized Sheet Metal EnclosuresNegotiableMOQ: 0
-
Local Laser Cutting Factory in Dongguan | Bulk Processing of Hardware Parts/sheet Metal PartsNegotiableMOQ: 0
-
304 Stainless Steel Laser Cutting | Burr-free and Deformation-free, Customized Precision PartsNegotiableMOQ: 0
