C 7687 Digital Conductivity Transmitter With 0.1μS/cm Resolution and RS485 Modbus
Application of C 7687
It can be used in conjunction with various K coefficient conductivity electrodes.
For drinking water, food and beverages, chemicals, printing, irrigation, water treatment.
This controller can be used to measure conductivity and/or TDS or other indirect measurement values, and can also achieve resistance measurement and display.
If connected to RTD Pt 100 or RTD Pt 1000, manual and automatic temperature compensation can be provided.
When connected to RTD, the instrument can also provide temperature readings.
This instrument provides:
- Display of measured values according to the range of the matching sensor
- Automatic measurement control function;
- Low/high measurement, set point timeout operation and logic input control alarm;
- Programmable dual analog output for recording and obtaining measured values or PID regulation;
- Hold/Alarm function activated by two external passive contacts;
- Automatic/Manual automatic cleaning function. Specification
Display: Multi-line graphic display
Input: 2 or 4 (refer to 091.1382 option) Electrode conductivity probe
Range:
From 0 to 200.0 nS to 0 to 2000 mS
From 0 to 100.0 ppb to 0 to 1000 ppt
From 0 to 99.999 ohms to 0 to 999.99 megohms
Indirect measurement related to coefficients or tabular method
-10.0 to 110.0 °C / -14.0 to 230.0 °F
2 set points, with minimum/maximum function, lag and delay time programmable
Analog output: 0-20 or 4-20 mA isolated output, for PID regulation or measurement transmission
Min/max alarm relay, optional activation/deactivation function
Parameter configuration has two access levels, access code is set and selected by the user
Two logic digital inputs, selectable, for hold or alarm functions
Power supply: 85/264 Vac - 50/60 Hz, 5 VA
Enclosure: Metal, front panel protection level: IP 65
Dimensions: 98x98x104 mm (90x90x95 mm rear panel housing dimensions)
Patented appearance: 002564666-003 Optional options
091.427 Power supply 9/36 Vdc - 24 Vac
091.1381 Input compatible four-electrode probe
Send Inquiry to This Supplier
You May Also Like
-
PH7635 PH/ORP Controller - 0.01pH Precision With Auto/Manual Temp Compensation (-10~110℃) for Water TreatmentNegotiableMOQ: 100 Pieces
-
PH7685 PH/ORP Monitor With 2+1 Isolated Relays - Ideal for PLC/DCS Integration in Chemical PlantsNegotiableMOQ: 100 Pieces
-
High-Brightness LED PH7687 Transmitter - Auto/Manual Temp Compensation, Ideal for Labs & AquacultureNegotiableMOQ: 100 Pieces
-
DIN43700 Standard PH7615 Controller Corrosion-Resistant Plastic Housing for Small ManufacturingNegotiableMOQ: 100 Pieces
-
CL3436 Chlorine Residual Transmitter Isolated 4-20mA & RS485 for Drinking Water/Water TreatmentNegotiableMOQ: 1 Piece
-
CL3630 Online Chlorine Monitor - 2 Measurement Ranges (0-20ppm) & 10-30Vdc Safe Power SupplyNegotiableMOQ: 1 Piece
-
SZ283 Constant Voltage Electrode Dual Platinum Rings for Free Chlorine/Cl Dioxide/Ozone MeasurementNegotiableMOQ: 100 Pieces
-
CL6587.103 Multi-Parameter Water Analyzer - Free Chlorine, Ozone, PH, ORP & Temperature MonitoringNegotiableMOQ: 1 Piece
-
CL6587 Chlorine/Ozone Transmitter Auto/Manual Temp Compensation (Pt100/Pt1000) for Water TreatmentNegotiableMOQ: 1 Piece
-
Industrial CL7335 Chlorine Residual Controller - Programmable Set Points & Min/Max Alarm RelaysNegotiableMOQ: 1 Piece