Defibrillation Energy Analyzer Supplier/company

SKX-6000A     

SKX-6000A defibrillator energy analyzer is a test tool for measuring the energy release value of defibrillator developed by Xuzhou Mingsheng Company. Because it can produce a variety of abnormal waveforms, it can be widely used in various models of defibrillator, AED and various kinds of ECG equipment for daily maintenance and energy detection.

Instrument features

l Built-in 4 18650 large capacity lithium battery, power management module, in the process of use to ensure stable power supply, low interference output. Optional standard DC9V-12V universal interface power charger.

l Using menu operation, parameter change is simple, convenient and fast, convenient for user setting.

l 2.8TFT display screen is used to display the menu content.

l Quick key operation, menu management, easy to use.

l Built-in Chinese instructions and help, easy to understand

the waveform SettingsAnd parameter selection.

Function introduction

u It can output 12 conduction ECG waveform synchronously and

connect various ECG instruments.

u Can output up to 35 abnormal (PVC) ECG waveform;

u Can output sine waveform, square wave, sharp Angle waveform, QRST waveform, for ECG equipment detection;

u Integration of "JJF1149-2014 cardiac defibrillator Calibration Specification", step by step to complete the detection project;

u Built-in high-power 50R resistor, used to detect all kinds of defibrillator energy release value, detection range 0J-400J.

Matters needing attention

l Because this instrument is a special analyzer for defibrillators, please ask a professional to operate the defibrillator during the process of using and operating the defibrillator to release energy.

l The ECG waveform of the analyzer outputs the signal through the stainless steel electrode, and the output signal of the stainless steel electrode is not simultaneous with the signal of the lead line interface.

l The percutaneous pacemaker pulse detection is input through the stainless steel electrode. When using this detection function, please connect the pluse interface on the panel with a wire.

Model SKX-6000B   

Suitable for testing defibrillation protection performance