Lotte PC PC-1150 High flow and easy demolding
PC is an almost colorless glassy amorphous polymer with excellent optical properties. PC high molecular weight resin has high toughness, with a cantilever beam notch impact strength of 600-900J/m. The unfilled grade has a thermal deformation temperature of approximately 130 ° C, and glass fiber reinforcement can increase this value by 10 ° C. The bending modulus of PC can reach over 2400MPa, and the resin can be processed into large rigid products. Below 100 ° C, the creep rate under load is very low. PC has good hydrolysis resistance, but cannot be used for products that are repeatedly subjected to high-pressure steam.
Send Inquiry to This Supplier
You May Also Like
-
Food-grade PA66 FGFE5171 DuPontNegotiableMOQ: 25 Kilograms
-
Japanese Polyoxymethylene: POM M90-44 CopolymerNegotiableMOQ: 25 Kilograms
-
BASF Fiber-Reinforced TPU R2000NegotiableMOQ: 25 Kilograms
-
Covestro PC 2805NegotiableMOQ: 25 Kilograms
-
Korean Lotte PC PC-1100NegotiableMOQ: 25 Kilograms
-
Halogen-free Flame-retardant PA66NegotiableMOQ: 25 Kilograms
-
EVA Foam Grade From Formosa Plastics, Model 7470MNegotiableMOQ: 25 Kilograms
-
Infrared Rays Can Penetrate PC MaterialsNegotiableMOQ: 25 Kilograms
-
PC Covestro Germany Model 2405NegotiableMOQ: 25 Kilograms
-
High-temperature-resistant PC 1803 Germany CovestroNegotiableMOQ: 25 Kilograms







