High Heat Resistance PC/ABS C6600 Sabic

PC/ABS (alloy) is a blend of high impact resistant, amorphous polycarbonate (PC) and acrylonitrile butadiene styrene terpolymer (ABS). It has the impact resistance and excellent weather resistance of PC, as well as the high fluidity of ABS

Advantages of PC/ABS alloy after synthesis:

Excellent weather resistance, exposed outdoors for 2 years, its tensile strength and bending strength remain almost unchanged, and the impact strength of PC/ABS after blending is 4 times that of PC.

Good stress cracking resistance, with an impact strength 3-4 times that of PC at room temperature

Excellent aging resistance, after 140 hours at 120 degrees, its impact strength is still twice that of PC.

The viscosity of the solution can be reduced, the molding temperature is lower, and it is easier to form.

PC/ABS alloy is a non-toxic, odorless, renewable, and recyclable green material, and its environmental performance has passed relevant testing and certification at home and abroad.

PC/ABS alloy has high impact strength, good rigidity, high hardness, and good toughness, making it widely used in industrial applications. Currently, products made of this type of material are ubiquitous in our daily lives. For example: electronic and electrical casings, instruments, etc. Due to its non-toxic, harmless, and non corrosive properties, PC/ABS has become the preferred material for making faucets.

PC/ABS alloy has superior comprehensive performance, high impact resistance, good rigidity and toughness, high hot deformation temperature, and can be used for a long time at 120 ° C without thermal expansion or contraction. At the same time, it has good weather resistance, flame retardancy, and self extinguishing properties. High dielectric strength makes it an excellent insulator. It can be said to be a good fire and electricity resistant material.