Contact Platform Support
Help CenterFoxboro P0926GH Communication Terminal – Reliable Field Termination for Foxboro DCS Serial Communications
Related Products
-
Foxboro P0973CN Expansion Backplane – Expand I/A Series/200 Series I/O Capacity With Clean, Redundant DistributionUS$ 2560.00MOQ: 1 Blade -
Foxboro P0973LQ Network Power Supply – Stable DC Power for I/A Series Nodes and Control CabinetsUS$ 2560.00MOQ: 1 Blade
-
FOXBORO RH916XG Input Module – Multi‑Channel Analog Input for I/A Series DCSUS$ 2560.00MOQ: 1 Blade
-
FOXBORO RH924WA Fiber Optic Network Adapter – Reliable Fiber Link for I/A Series and Plant Ethernet SegmentsUS$ 2560.00MOQ: 1 Blade
-
Foxboro RH924YF DIN‑Rail Mounted Modular Baseplate – Clean, Reliable Backplane for Modular I/O in Control PanelsUS$ 2560.00MOQ: 1 Blade
Warranty: 365 days
Delivery time: 1 week for in‑stock; no more than one month at the latest
Payment: 50% advance payment, full payment for delivery
Express options: FedEx, UPS, DHL
Purpose-built termination for Foxboro comms – Provides field wiring terminations for serial communication links used by Foxboro FBM/Controller interfaces.
Stable RS‑485/RS‑232 wiring practices – Supports differential pair landing, shield/drain handling, and clear polarity labeling to reduce noise pickup.
DIN-rail mounting – Typically mounts on 35 mm DIN rail in standard control cabinets for fast installation and tidy cable routing.
Passive design – No external power needed; integrates into the cabinet with minimal complexity.
Service-friendly layout – Screw-clamp (or equivalent) terminals with clear channel markings, making loop checks and troubleshooting straightforward.
Bus termination options – In many cases, jumpers or provisions for RS‑485 termination/bias are available to keep multi-drop networks stable.
Drop-in spares – Compatible with Foxboro DCS architecture, easing MRO stocking and replacement without rework.
| Brand / Model | Foxboro P0926GH |
| HS Code | 8538.90 (Parts for electrical control/switching apparatus) |
| Power Requirements | None (passive termination assembly) |
| Communication Interfaces | Field termination for serial links used with Foxboro communication FBMs/controllers; typically RS‑485/RS‑422 or RS‑232 depending on paired module |
| Signal I/O Types | Differential pairs and shield/drain connections for serial comms; screw-clamp terminal points |
| Installation Method | 35 mm DIN-rail mounting within a grounded control cabinet; front-access terminals |
| Operating Temperature | Cabinet environment; typically 0 to +55 °C when installed per Foxboro guidelines |
| Dimensions & Weight | Compact, low-profile TA form factor; DIN-rail footprint (exact values depend on revision) |
| Typical Pairing | Foxboro I/A Series / EcoStruxure Foxboro DCS communication FBMs (e.g., serial interface modules) |
Plants that rely on serial networks to link analyzers, drives, smart instruments, or package skids to a Foxboro DCS. You’ll see it most in:
Oil & Gas (wellhead and pipeline skids, compressor panels)
Chemicals & Petrochemicals (RS‑485 networks for analyzers and VFDs)
Power Generation (balance-of-plant subsystems and OEM packages)
Water & Wastewater (remote panels and serial telemetry gateways)
Pharma & Food (equipment skids and OEM machine interfaces)
A maintenance supervisor in a refinery once told us the P0926‑series terminal “saved a full shift” during a turnaround because the labeling and shield terminations made device swaps much quicker, especially on multi-drop RS‑485 loops.
Reliability – Proper bus termination and clean grounding practices reduce intermittent comms faults that are notoriously hard to diagnose.
Compatibility – Designed for Foxboro DCS architecture, so it typically matches wiring conventions and channel pinouts used by Foxboro comm FBMs.
Cost Control – Faster installation and fewer nuisance trips mean measurable savings in commissioning and maintenance hours.
Lifecycle Support – Straightforward, passive hardware is easy to stock as a spare and stable across system upgrades in many cases.
Technical Backing – We can help verify pairing with your specific FBM module and share wiring notes that minimize crosstalk and reflections.
Cabinet & mounting – Install on 35 mm DIN rail in a clean, dry, grounded enclosure. Provide ventilation to keep internal cabinet temperature within spec.
Wiring practices – Use shielded twisted pair for RS‑485/RS‑422. Terminate shield at one end as per site EMC policy; avoid ground loops.
Bus termination – Apply end‑of‑line termination (and biasing) at the bus ends only. If the terminal provides jumpers, set them to match the network layout.
Separation – Route communication cables away from high‑current or VFD cables. Maintain bend radius and avoid sharp tie-wrap stress.
Torque & labeling – Tighten to the recommended torque for screw clamps and label each drop; it seems trivial but prevents intermittent faults later.
Routine checks – Every 6–12 months, re‑torque terminals, inspect shields/drains, clean dust, and verify continuity. Firmware updates are not applicable for passive terminals.
Safety – De‑energize the loop where practical before servicing, and verify isolation from adjacent energized terminals.
Manufactured for use within Foxboro DCS environments
Typically supplied with CE compliance; many installations also use UL/CSA-certified panels
RoHS alignment in most recent production runs, depending on revision
Standard 365-day warranty from us
Need confirmation against a specific FBM or a wiring diagram? Share the module model and we’ll verify P0926GH pairing and termination details before you place the order.
Send Inquiry to This Supplier
You May Also Like
-
FOXBORO SCD2200 Remote Terminal Unit – Robust Field Control for SCADA and Process AutomationUS$ 2560.00MOQ: 1 Blade
-
FOXBORO SCD2200-RTU – Remote Terminal Unit Control Module for Reliable SCADA and Field AutomationUS$ 2560.00MOQ: 1 Blade
-
Foxboro SSA-AC-PS-625W (C71S-1522) Evo Control Network Power Supply – Stable 24 VDC for Critical Control CabinetsUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0926JM – 8-Position Modular Baseplate for FBM I/O ModulesUS$ 2560.00MOQ: 1 Blade
-
FOXBORO P0904HN: Industrial Power Module for Uninterrupted Control SystemsUS$ 2660MOQ: 1 Blade
-
FOXBORO SRI986-BIDS7ZZZNA – Smart Electro-Pneumatic Valve Positioner for Precise Actuator ControlUS$ 2660MOQ: 1 Blade
-
8200-1312 High Performance Electronic Module Supports Multiple Languages Including ChineseNegotiableMOQ: 1 Bag
-
H929049B0500 Pressure Transmitter Capable of Storing Large Amounts of Data and FilesNegotiableMOQ: 1 Bag
-
AX8200A 0190-09437 Ozone Generator With Programmable Software Detection FunctionNegotiableMOQ: 1 Bag
-
GHW-12Z Radio-frequency Plasma Generator MKS InstrumentNegotiableMOQ: 1 Bag
