Contact Platform Support
Help CenterEmerson VE4017P0 M-series H1 I/O Interface Card – FOUNDATION Fieldbus H1 Connectivity for DeltaV
Related Products
-
Emerson VE4022 – M‑series Profibus DP Series 2 Plus Interface Card for DeltaV IntegrationUS$ 1216.00MOQ: 1 Blade -
Emerson VE4032S1T2B1 – DeltaV M-series Traditional I/O for 4–20 mA Analog Output (HART)US$ 1216.00MOQ: 1 Blade
-
Emerson VE4033S2B1 Redundant Analog Input Card – Reliable 4–20 mA Acquisition for High-availability Process ControlUS$ 1216.00MOQ: 1 Blade
-
Emerson DeltaV KJ2005M1-BK1 Controller: Your Process Control WorkhorseUS$ 1216.00MOQ: 1 Blade
-
Emerson DeltaV KJ2005X1-SQ1 Controller Module: Your Process Stability AnchorUS$ 1216.00MOQ: 1 Blade
Warranty period: 365 days
Delivery time: 1 week for in‑stock items; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express delivery options: FedEx, UPS, DHL
FOUNDATION Fieldbus H1 interface – Connects DeltaV controllers to smart FF devices at 31.25 kbps with IEC 61158-2 compliance.
Segment scheduling (LAS) – Manages deterministic communications, which in many cases improves loop stability and update times.
DeltaV-native diagnostics – Device and segment health are visible in DeltaV, helping maintenance teams pinpoint wiring, power, or device issues quickly.
Isolation and robustness – Galvanic isolation from the backplane helps protect the system from field faults and noise.
Redundancy-ready – Typically supports redundant operation when deployed as a paired set, minimizing single points of failure.
Hot-replaceable on M-series carrier – You can usually swap the card with the system powered, reducing downtime during maintenance.
Flexible power options – Works with external FF power conditioners and terminators; suitable for trunk-and-spur topologies and field barriers.
| Brand / Model | Emerson DeltaV / VE4017P0 (M‑series H1 I/O Interface Card) |
| HS Code | 8537.10 (Boards/panels for electric control, ≤1000 V) |
| Power Requirements | Powered via DeltaV M‑series carrier backplane; low card consumption (typical for M‑series FF cards) |
| Operating Temperature | 0 to 55°C (32 to 131°F), typical M‑series rating |
| Signal I/O Types | FOUNDATION Fieldbus H1 segments (31.25 kbps, IEC 61158-2) |
| Communication Interfaces | H1 fieldbus to devices; DeltaV backplane to controller |
| Segments per Card | Multiple H1 segments (commonly 2 per card in M‑series deployments) |
| Installation Method | Plug‑in card on DeltaV M‑series carrier; field wiring via terminal block with external FF power conditioners & terminators |
| Dimensions & Weight | Standard M‑series I/O card form factor; compact, approx. 0.3 kg |
| Standards | IEC 61158 (FOUNDATION Fieldbus H1) |
The VE4017P0 suits plants that rely on smart FF instrumentation: oil & gas production, refining, chemicals, power generation, water & wastewater, and pharmaceuticals. Typical use cases include tying in smart pressure and temperature transmitters, valve positioners, and analyzers where you want device‑level diagnostics and reduced marshalling. One thing I appreciate is how it streamlines commissioning—Device Descriptions and standardized function blocks often mean fewer custom mappings.
Smart control loops with FF function blocks running at the device level
Long trunk with spur topology in process units, using segment protectors
Brownfield expansions where FOUNDATION Fieldbus already exists and must integrate cleanly into DeltaV
Reliability – H1 segment isolation and proven DeltaV backplane design help maintain uptime, even in electrically noisy areas.
Compatibility – Native to DeltaV; supports standard FF devices and DD‑based integration, which typically shortens FAT/SAT cycles.
Cost savings – Fewer home‑run cables and extensive device diagnostics can reduce commissioning effort and maintenance callouts.
Lifecycle support – Firmware and configuration managed through DeltaV tools; simpler spares strategy when standardizing on M‑series cards.
Cabinet environment – Install on an M‑series carrier in a ventilated, dry cabinet. Maintain ambient within 0–55°C with adequate airflow and DIN‑rail grounding.
Wiring – Use FF‑rated twisted pair for trunk/spurs; maintain proper shielding and single‑point grounding. Place two terminators per segment (one at each end) unless a powered coupler provides integrated termination.
Segment power – Provide external FF power conditioners and, where needed, spur protectors/field barriers. Check device current budget before adding instruments.
Redundancy – For high availability, deploy redundant H1 cards and separate segment power feeds; route trunks along diverse paths if possible.
Maintenance – Periodically review DeltaV diagnostics for noise, retries, and voltage margins; clean connectors during turnarounds; keep controller/card firmware aligned with your validated DeltaV release.
Hot replacement – The card is typically hot‑swappable on the M‑series carrier; still, place outputs in a safe state and follow plant MOC procedures before swapping.
CE and UL/CSA certified for industrial use (typical for DeltaV I/O)
RoHS compliance for restricted substances
Manufacturer’s standard quality processes aligned with ISO practices
Warranty: 365 days
You might notice that projects gaining the most from VE4017P0 are the ones that standardize on a consistent H1 segment design—proper power conditioning, terminators, and clean topology. That’s usually where this card shines and keeps commissioning drama to a minimum.
Send Inquiry to This Supplier
You May Also Like
-
EMERSON DeltaV KJ2201X1-BA1: Your Plant's Last Line of Defense in Safety ShutdownsUS$ 1216.00MOQ: 1 Blade
-
Emerson SE4006P2 Digital Output Card: Rock-Solid Switching for Critical ProcessesUS$ 1216.00MOQ: 1 Blade
-
Emerson VE4003S2B9: Your Go-To 16-Channel Analog Input Card for Precision Process ControlUS$ 1216.00MOQ: 1 Blade
-
EMERSON WH1-2FF 1X00024H01: Industrial-Grade Power Module for Uninterrupted Control SystemsUS$ 1300.00MOQ: 1 Blade
-
Emerson WH5-2FF Power Module: Your DeltaV System's Silent WorkhorseUS$ 1300.00MOQ: 1 Blade
-
EMERSON VE4035S2B1 – System I/O Interface Module for Reliable DeltaV/Ovation Signal IntegrationUS$ 1300.00MOQ: 1 Blade
-
EMERSON DM37-AP01 (P/N 1360278) – Reliable Control-system Module for Emerson DCS/PLC PlatformsUS$ 1300.00MOQ: 1 Blade
-
EMERSON 3080016 Industrial Control Module – Reliable Spare for Expansion or Field ReplacementUS$ 1300.00MOQ: 1 Blade
-
EMERSON DM25-AP02 (P/N 13596252) – Compact Control Module for Reliable Process I/O in Industrial CabinetsUS$ 1300.00MOQ: 1 Blade
-
MVME55006E-0163R Embedded PC Processor Board A High-performance Processor is UsedNegotiableMOQ: 1 Bag
