Contact Platform Support
Help CenterEmerson VE4003S3B1 Standard I/O Termination Block – Reliable Field Wiring for DeltaV S-series I/O
Related Products
-
Emerson VE4003S5B1 Standard I/O Termination Block – Clean, Dependable Field Wiring for DeltaV S-series I/OUS$ 2216.00MOQ: 1 Blade -
Emerson VE4005S1B3 DeltaV S-series Traditional I/O – Field Wiring and Module Interface for S-series I/OUS$ 2216.00MOQ: 1 Blade
-
Emerson VE4005S2B1 DeltaV S-series Traditional I/O – 2‑wide Base for Reliable Field Wiring and System Backplane ConnectivityUS$ 2216.00MOQ: 1 Blade
-
Emerson VE4013S2B1 Standard I/O Termination Block – Clean, Reliable Field Wiring for DeltaV I/OUS$ 2216.00MOQ: 1 Blade
-
Emerson VE4017P0 M-series H1 I/O Interface Card – FOUNDATION Fieldbus H1 Connectivity for DeltaVUS$ 2216.00MOQ: 1 Blade
Warranty: 365 days coverage
Lead time: In-stock items ship in about 1 week; never more than 1 month in most cases
Payment terms: 50% advance payment; balance due prior to delivery
Express delivery: FedEx, UPS, DHL
Purpose-built for DeltaV S-series: Plugs directly onto the S-series I/O carrier for a secure, repeatable connection.
Passive termination: No power required; simply routes field signals to the I/O card.
Clean field wiring: Screw-clamp terminals help manage analog and discrete wiring with clear channel mapping.
HART compatible (when applicable): Supports HART pass-through with HART-capable I/O cards, which, in many cases, simplifies device diagnostics.
Service-friendly design: Captive hardware and keyed alignment make swaps and maintenance quick, typically without disturbing the carrier.
Robust build: Industrial-grade materials and proven workmanship for control cabinets that run 24/7.
| Brand / Model | Emerson VE4003S3B1 (Standard I/O Termination Block for DeltaV S-series) |
| HS Code | 853890 (Parts suitable for switching/protective apparatus) |
| Power Requirements | None (passive termination block) |
| Signal I/O Types | Field terminations for analog (e.g., 4–20 mA) and discrete I/O; HART pass-through when used with HART-capable DeltaV cards |
| Communication Interfaces | Not applicable (no active communications; signal routing only) |
| Installation Method | Plug-on to DeltaV S-series I/O carrier; screw-clamp terminals for field wiring; captive fastening |
Typically used across process industries where DeltaV S-series is deployed:
Oil & Gas – wellhead skids, compressor stations, separators, and ESD panels
Refining & Petrochem – unit I/O marshaling, analyzer shelters, interlocks
Power & Utilities – boiler controls, BOP systems, water treatment
Life Sciences – clean utilities, CIP/SIP skids, batch equipment
Chemicals & Pulp/Paper – mixers, reactors, drive controls, packaging lines
Reliability: Proven hardware with stable mechanical engagement reduces loose-connection faults.
Compatibility: Engineered for DeltaV S-series carriers and I/O, which helps avoid fitment surprises.
Lower lifecycle cost: Passive design means minimal failure modes and easy replacement.
HART diagnostics: When paired with HART cards, device diagnostics can ride the same wiring—no extra hardware in many cases.
Fast turnaround: Stock-based delivery and straightforward commissioning keep projects moving.
Cabinet environment: Install in a clean, ventilated control cabinet; maintain separation for high-voltage and signal wiring.
Mounting: Plug the termination block onto the S-series carrier; tighten captive screws to the recommended torque.
Wiring: Use industrial-grade, properly ferruled conductors; typical field wire sizes are 0.5–2.5 mm² (20–14 AWG).
Shielding/grounding: Terminate cable shields consistently; follow plant grounding practices to minimize noise.
Routine checks: Periodically re-torque terminals, inspect for insulation damage, and clean dust with dry air.
Handling: Observe ESD-safe handling even for passive blocks; avoid mechanical stress on terminal screws.
A maintenance supervisor told us they swapped several VE4003S3B1 blocks during a turnaround and shaved hours off the schedule simply because the plug-on design and channel labeling made cross-checking faster than expected.
Quality & CertificationsTypically conforms to CE requirements for industrial control equipment
UL/CSA recognized components ecosystem for DeltaV S-series in many deployments
RoHS-compliant materials, as commonly supplied for process automation hardware
Manufacturer warranty: 12 months (365 days)
Certification availability can vary by region and system configuration. If you need a specific certificate revision, we can verify it against your project documentation before shipment.
Send Inquiry to This Supplier
You May Also Like
-
Emerson VE4022 – M‑series Profibus DP Series 2 Plus Interface Card for DeltaV IntegrationUS$ 1216.00MOQ: 1 Blade
-
Emerson VE4032S1T2B1 – DeltaV M-series Traditional I/O for 4–20 mA Analog Output (HART)US$ 1216.00MOQ: 1 Blade
-
Emerson VE4033S2B1 Redundant Analog Input Card – Reliable 4–20 mA Acquisition for High-availability Process ControlUS$ 1216.00MOQ: 1 Blade
-
Emerson DeltaV KJ2005M1-BK1 Controller: Your Process Control WorkhorseUS$ 1216.00MOQ: 1 Blade
-
Emerson DeltaV KJ2005X1-SQ1 Controller Module: Your Process Stability AnchorUS$ 1216.00MOQ: 1 Blade
-
EMERSON DeltaV KJ2201X1-BA1: Your Plant's Last Line of Defense in Safety ShutdownsUS$ 1216.00MOQ: 1 Blade
-
Emerson SE4006P2 Digital Output Card: Rock-Solid Switching for Critical ProcessesUS$ 1216.00MOQ: 1 Blade
-
Emerson VE4003S2B9: Your Go-To 16-Channel Analog Input Card for Precision Process ControlUS$ 1216.00MOQ: 1 Blade
-
EMERSON WH1-2FF 1X00024H01: Industrial-Grade Power Module for Uninterrupted Control SystemsUS$ 1300.00MOQ: 1 Blade
-
Emerson WH5-2FF Power Module: Your DeltaV System's Silent WorkhorseUS$ 1300.00MOQ: 1 Blade
