Contact Platform Support
Help CenterEmerson KJ1501X1-BB1 DeltaV System Power Module – Stable Backplane Power for DeltaV M‑series Nodes
Related Products
-
Emerson KJ1501X1-BC1 Power Supply Module – Reliable 24 VDC Backplane Power for DeltaV S-series I/OUS$ 2216.00MOQ: 1 Blade -
Emerson KJ1501X1-BC2 DCS Dual DC Power Supply Module – Reliable Redundant Power for DeltaV CabinetsUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1501X1-BC3 Dual DC Power Module – Reliable Redundant 24 VDC Feed for DeltaV S‑series Power DistributionUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1501X1-BD1 – DeltaV I/O Module for Reliable Process Signal IntegrationUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1501X1-BE1 Digital Input/Output Module – Reliable 24 VDC Discrete I/O for Process Control RacksUS$ 2216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
Designed for DeltaV M‑series carriers – Plugs directly into standard M‑series horizontal or vertical carriers; no special adapters.
24 VDC system distribution – Feeds regulated 24 VDC to the backplane to power controllers and I/O, keeping field hardware isolated from bulk supply variations.
Redundancy-ready – In many cases you can fit two power modules on the same carrier for automatic failover; replacement of one unit is typically possible without process interruption.
Front-panel status LEDs – Quick at-a-glance health and fault indication; useful when you’re troubleshooting in a crowded cabinet.
Robust mechanical design – Positive latching and keyed mechanical alignment help avoid mis-insertion and vibration issues over long service cycles.
Low-touch upkeep – No configuration software; just reliable backplane power with routine visual checks.
| Brand / Model | Emerson DeltaV / KJ1501X1-BB1 (System Power Module) |
| HS Code | 8504.40 (Static converters – power supplies) |
| Power Requirements | 24 VDC nominal input from external bulk supply; distributes 24 VDC onto the DeltaV backplane |
| Signal I/O Types | Power distribution only (no analog/digital signal channels) |
| Communication Interfaces | None (front status LEDs for diagnostics) |
| Installation Method | Plug-in module for DeltaV M‑series carriers; supports redundant pairing where carrier supports dual supplies |
This module is typically specified anywhere a DeltaV M‑series node is installed: refining and petrochemicals, specialty chemicals, power generation (including CCGT and CHP), pharmaceuticals, food & beverage, and water/wastewater. A maintenance lead at a mid‑size chemical plant summed it up well: “Once we paired the KJ1501X1 modules for redundancy, power alarms practically disappeared during switchovers.”
Reliability you can plan around – Stable 24 VDC backplane power reduces nuisance trips and intermittent faults tied to marginal supplies.
Compatibility baked in – Purpose-built for DeltaV M‑series carriers; no third-party adapters or rewiring tricks.
Redundancy without complexity – In many cases, two modules share load and provide seamless failover; that translates to fewer planned outages.
Lower lifecycle cost – Minimal maintenance, quick replacement, and long service life help trim OPEX over the system’s lifecycle.
Practical support – Straightforward diagnostics and established install practices speed up commissioning and troubleshooting.
Cabinet standards – Install in a clean, dry, ventilated control cabinet; follow DeltaV M‑series carrier spacing and mounting guidelines.
Power wiring – Supply from a regulated 24 VDC bulk source sized for full node load plus redundancy margin; use correctly rated conductors and protective devices.
Ventilation – Provide airflow to avoid heat buildup around the carrier; avoid bundling power with high-noise cabling.
Safety – De-energize the bulk 24 VDC feed before first installation; with redundant pairs, one unit can typically be replaced online, but follow site MOC and LOTO procedures.
Routine checks – Periodically inspect terminal tightness, look for discoloration or dust buildup, and verify status LEDs during PM rounds. Firmware updates are not applicable to this power module.
Conformity: CE
Safety: UL recognized (typical for DeltaV M‑series modules)
Environmental: RoHS compliant
Manufacturing Quality: Produced under ISO 9001 quality systems
Warranty: 365 days
Send Inquiry to This Supplier
You May Also Like
-
Emerson DeltaV KJ1611X1-EF1 Network Switch Module – Reliable Ethernet Switching for DeltaV Control NetworksUS$ 2216.00MOQ: 1 Blade
-
Emerson DeltaV KJ1501X1-BK1 – System Power Module for Stable Backplane PowerUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1502X1-BA2 Controller Module – High-reliability Control Core for DeltaV DCS NodesUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1700X1-BA1 I/O Interface Module – Reliable Backplane Interface for DeltaV I/O SubsystemsUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1710X1-BA1 Digital Input/Output Module – Robust Discrete Signal Interface for DeltaV-based Control SystemsUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ1740X1-BA1 HART Communication Module – Smart HART Pass-through for Plant-wide Device DiagnosticsUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ2001X1-BA1 Intelligent Logic Solver Module for DeltaV SIS Safety ControlUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ2002X1-BA1 Safety Input/Output Module – Reliable Safety I/O for DeltaV-based CabinetsUS$ 2216.00MOQ: 1 Blade
-
Emerson DeltaV KJ2002X1-CA1 Controller Module – Compact, Reliable Control for DeltaV SystemsUS$ 2216.00MOQ: 1 Blade
-
Emerson KJ2003X1-BA2 Controller Module – Scalable DeltaV Control for Reliable Plant AutomationUS$ 2216.00MOQ: 1 Blade
