Contact Platform Support
Help CenterABB DSPC454 (57310303-F3) Processor Module – Central CPU for Advant Controller 450 Systems
Related Products
-
ABB DSQC658 (3HAC025779-001) Bus Module – Reliable Fieldbus Coupling for ABB Robot I/O IntegrationUS$ 3216.00MOQ: 1 Blade -
ABB DSQC639 (3HAC025097-00116) Main Chassis Motherboard – Core CPU Board for ABB IRC5 Robot ControllersUS$ 3216.00MOQ: 1 Blade
-
ABB DSQC661 (3HAC026253-001) – DC Digital Input Module for IRC5/S4C+ Robot ControllersUS$ 3216.00MOQ: 1 Blade
-
ABB E3EB HENF315129R1 Industrial Control Module – Field‑replaceable Board for ABB Drive/automation SystemsUS$ 3216.00MOQ: 1 Blade
-
ABB HENF452750R1 (E3EFa) Automation Controller Module – OEM Control Board for Drive CabinetsUS$ 3216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
Purpose-built CPU for Advant Controller 450 – Designed to run control logic and manage deterministic tasks in ABB Advant racks.
Backplane-based I/O access – No direct field I/O on-board; it supervises I/O via the Advant rack backplane for stable, low-latency operation.
Serviceability – Typically supports a service/maintenance interface for setup and diagnostics, which helps during commissioning and troubleshooting.
Revision F3 – The 57310303-F3 variant is a later hardware/firmware revision that in many cases brings improved reliability over earlier releases.
Drop-in replacement behavior – In most cases, it can be swapped within the same system version to minimize engineering changes and reduce downtime.
| Brand / Model | ABB DSPC454 |
| Part Number / Revision | 57310303-F3 (Processor Module) |
| HS Code (reference) | 8537.10 – Boards/panels for control, for a voltage ≤ 1,000 V |
| System Compatibility | ABB Advant Controller 450 platforms (rack-mounted) |
| Power Requirements | Backplane powered by the controller rack power supply (no external field power to the module) |
| Dimensions & Weight | Single-slot rack module; typical module weight under 1 kg |
| Operating Temperature | Typically 0 to +55°C when installed in a ventilated cabinet |
| Signal I/O Types | No direct process I/O; communicates with I/O modules via the rack backplane |
| Communication Interfaces | Backplane bus; service/maintenance interface on many revisions; plant networks via separate Advant communication modules |
| Installation Method | Rack-mounted in ABB Advant Controller cabinet; front-insertion with backplane connectors |
Plants that standardized on ABB Advant use the DSPC454 as the brain of the controller. You might notice it most in brownfield sites where continuity is critical:
Power generation (steam/GT balance-of-plant, water/booster systems)
Oil & gas (compressor control, utilities, loading/unloading)
Pulp & paper (stock prep, machine sections, recovery boiler auxiliaries)
Chemical and petrochemical (unit operations, utilities, flare systems)
Metals & mining (materials handling, water treatment)
One thing I appreciate is how predictable the behavior is when replacing like-for-like modules. A maintenance lead recently told us they swapped a failing CPU for a DSPC454 57310303-F3 on a night shift and were back up within the window—no rework on the I/O side, just a clean configuration restore.
Reliability – Mature platform with stable behavior; later F3 revision typically improves lifecycle performance.
Compatibility – Works within existing Advant racks and I/O, reducing migration scope and risk.
Cost Control – Extends life of installed assets; avoids unplanned system upgrades and extended shutdowns.
Supportability – Well-documented in the field; engineers are familiar with its diagnostics and replacement process.
Cabinet & environment – Install in a clean, dry, ventilated control cabinet. Maintain ambient temperature within the typical 0…55°C range and ensure airflow around the rack.
Wiring & power – The module is backplane powered. Verify stable rack power and proper grounding. Do not connect field wiring to the CPU module.
Handling & ESD – Use ESD protection. Power down the rack before insertion/removal unless your procedure allows hot-swap for the specific slot (most sites power down for the CPU).
Commissioning – Load the correct firmware/configuration, then verify I/O scans and network links via system diagnostics. Keep a known-good backup on hand.
Routine upkeep – Periodically check event logs, clean dust with dry air, and keep firmware/configuration aligned with site standards. Replace aging connectors or rack fans as needed.
CE conformity for industrial control use (typical for ABB Advant modules)
UL/cUL recognition is common for many Advant system components; availability may vary by revision
Manufacturer quality systems aligned with ISO 9001 practices
RoHS status may vary due to original production date; many installed-base replacements are supplied for maintenance of existing equipment
Warranty: 365 days
If you’re matching a specific site standard or firmware level, share the exact rack type and current system version. It seems to save time up front and, in many cases, we can align the module to your revision before shipment.
Send Inquiry to This Supplier
You May Also Like
-
E3EP HENF315276R1 PLC – Compact Control for Fast, Reliable Machine AutomationUS$ 3216.00MOQ: 1 Blade
-
ABB FI820F (3BDH000031R1) Fieldbus Module – Stable PROFIBUS DP Connectivity for Freelance AC 800FUS$ 1216.00MOQ: 1 Blade
-
ABB FI830F (3BDH000032R1) – Core Bus Communication Module for PROFIBUS DP in Freelance AC 800FUS$ 1216.00MOQ: 1 Blade
-
ABB G3EB HENF315768R1 – High‑performance Industrial Control Module for ABB DCS/automation SystemsUS$ 2560.00MOQ: 1 Blade
-
ABB G3EFa HENF450295R2 Controller – Compact CPU Module for Stable Plant Control and Fast ReplacementUS$ 2560.00MOQ: 1 Blade
-
ABB G3ENa HENF450268R2 Controller – Ethernet-enabled Control Module for Modernizing and Maintaining Plant SystemsUS$ 2560.00MOQ: 1 Blade
-
ABB G3FCB HENF458568R1 – Field/Process Control Module for ABB Drive and DCS CabinetsUS$ 2560.00MOQ: 1 Blade
-
ABB G3FK HENF452878R1 Industrial Automation Control Module – Stable Control and I/O Interfacing for Demanding PlantsUS$ 2560.00MOQ: 1 Blade
-
HESG216876 Multi-Channel Vibration Meter: Stop Guessing When Bearings Are FailingUS$ 3300.00MOQ: 1 Blade
-
ABB NF93-2 HESG440280R2: Your Reliable Workhorse for Complex Automation TasksUS$ 9150 - 9500MOQ: 1 Piece
