Contact Platform Support
Help CenterDEIF CM-2 Control Module – Compact Controller for Generator and Power Management Applications
Related Products
-
DEIF DLQ144-PC-NB Multi-Function Controller – Reliable 144 mm Panel Controller for Gensets and SwitchgearUS$ 216.00MOQ: 1 Blade -
DEIF OPM-1 Operator Panel – A Practical Remote HMI for DEIF Power and Genset ControllersUS$ 1216.00MOQ: 1 Blade
-
DEIF IPM-1 Intelligent Power Manager – Centralised Control for Multi-source Power SystemsUS$ 1216.00MOQ: 1 Blade
-
DEIF DELOMATIC-3 Printed Circuit Board – OEM Spare Board for Marine Power Management and Genset ControlUS$ 1216.00MOQ: 1 Blade
-
DEIF PSM-1 Power Supply Module – Stable DC Backbone for DEIF Controller SystemsUS$ 1216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week ex-stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment prior to delivery
Shipping: FedEx, UPS, DHL
24 VDC industrial power range – Typically supports wide 8–36 VDC input for stable operation on vehicle, marine, or plant DC rails.
Flexible I/O set – Discrete inputs for status sensing, analog inputs for 0–10 V/4–20 mA, and relay outputs for control, suited to engines and breakers.
Modbus RTU over RS‑485 – Straightforward integration with PLCs, BMS/SCADA, and remote HMIs in most cases.
CAN J1939 support – Reads engine ECU data (RPM, temperatures, alarms) and simplifies genset wiring.
Compact, panel-friendly format – Saves space in crowded cabinets and typically reduces panel depth requirements.
Rugged design – Built for electrical noise environments with stable behavior around alternators, contactors, and VFDs.
Service-friendly – Typically supports quick configuration backup/restore and on-site replacement without re-engineering.
| Brand / Model | DEIF CM-2 Control Module |
| HS Code | 8537.10 (Boards/panels for electric control, ≤1000 V; for reference) |
| Power Requirements | 8–36 VDC (nominal 24 VDC), typical consumption |
| Dimensions & Weight | Compact module footprint; approx. 110 × 90 × 60 mm; ≤ 0.35 kg (may vary by version) |
| Operating Temperature | -20 °C to +70 °C (typical industrial rating) |
| Signal I/O Types | Digital inputs (24 VDC), analog inputs (0–10 V / 4–20 mA), relay outputs (Form A), status LEDs |
| Communication Interfaces | RS‑485 (Modbus RTU), CAN (J1939); service/USB port depending on variant |
| Installation Method | DIN‑rail or back‑panel mounting; internal cabinet installation |
The CM-2 seems to be a solid fit anywhere you need reliable control and monitoring without a full PLC. Common deployments include:
Diesel and gas genset panels: engine monitoring, start/stop logic, breaker command, and alarms.
Marine power management: auxiliary gensets, harbor gens, and emergency power switchboards.
Microgrids and CHP: interfacing metering, protection relays, and supervisory systems over Modbus.
Pump and compressor skids: simple sequencing, fault interlocks, and remote telemetry.
Industrial backup power: ATS panels and load transfer logic with clean RS‑485 integration.
Reliability – Designed for electrically noisy environments; stable behavior around alternators and contactors.
Compatibility – Modbus RTU and CAN J1939 keep it friendly with PLCs, ECUs, and SCADA platforms.
Space & cost savings – Compact format typically reduces cabinet footprint and wiring complexity.
Lifecycle support – DEIF’s long product support helps standardize spares and reduce downtime risk.
Serviceability – Quick swap-outs and straightforward parameter loading shorten site time.
A maintenance supervisor told us they replaced an older controller with a CM-2 during a two-hour outage window and cut troubleshooting time in half because the Modbus tags mapped one-to-one with their SCADA. That’s typical of what we see in retrofit projects.
Installation & MaintenancePanel/cabinet: Install in a dry, ventilated enclosure (IP54 or better recommended). Maintain clearance for heat dissipation.
Power & grounding: Use a stable 24 VDC supply with proper grounding; keep commons clean to avoid sensor drift.
Wiring: Use shielded twisted pair for RS‑485/CAN; terminate buses properly (120 Ω). Separate signal and power wiring.
Protection: Add inline fusing and surge suppression on inductive loads (coils, contactors) to extend relay life.
Configuration: Save parameter sets before commissioning; document Modbus register maps for SCADA integration.
Routine checks: Periodic terminal re-torque, connector cleaning, and verification of I/O scaling (4–20 mA/0–10 V).
Firmware: Update during planned outages; back up configuration prior to upgrade.
CE conformity (EMC and LVD)
RoHS compliance
UL/cUL marking available on selected variants (varies by configuration)
Manufacturer warranty: 12 months
Note: Specifications can vary slightly by CM-2 hardware variant and firmware. For exact I/O count and interface set on your build, share the serial or configuration code and we’ll verify before shipment.
Send Inquiry to This Supplier
You May Also Like
-
DEIF SCM-1 Microprocessor-Based Synchronization Control Module – Automatic, Safe Genset-to-bus SynchronizingUS$ 1216.00MOQ: 1 Blade
-
DEIF SCM4.1 Printed Circuit Board – Reliable Replacement PCB for DEIF Control SystemsUS$ 1216.00MOQ: 1 Blade
-
Dialogic DMV2400A-CPCI Digital Media Processing Board – CompactPCI Voice/VoIP Resources for Scalable IVR and TelephonyUS$ 3216.00MOQ: 1 Blade
-
Kongsberg RSER200-4 (603444) High-Accuracy Input Module – Precise 4‑Channel Analog Acquisition for Industrial & Marine ControlUS$ 2216.00MOQ: 1 Blade
-
DIGITAL POWER CPCI-AC-6U-500 (900-7002-99) – 500 W CompactPCI AC Power Supply for 6U SystemsUS$ 2216.00MOQ: 1 Blade
-
LAM Research 810-072906-005 Heavy‑Duty Connector Backplane – Reliable Power and I/O Distribution for Semiconductor ToolsUS$ 4022.00MOQ: 1 Pallet
-
LAM 810-082745-003 Industrial Circuit Board – OEM-grade Replacement for Tool Control and I/OUS$ 4022.00MOQ: 1 Pallet
-
Zygo 1115-801-346 Laser Head Cable – Stable, Low‑Noise Connection for Precision MetrologyUS$ 3475.00MOQ: 1 Pallet
-
Eaton 1785T-PMPP-1700 Operator Interface Module – PanelMate Power Pro HMI for Machine Visualization and ControlUS$ 3216.00MOQ: 1 Blade
-
Eaton CS‑TX3‑3.81×2.54‑64TW Pluggable Terminal Block – High‑Density, Dual‑Pitch Connector for Control and I/O BoardsUS$ 1216.00MOQ: 1 Blade
