Contact Platform Support
Help CenterKollmorgen S20360-SRS High‑Speed Digital AC Servo Drive – Precise, Compact Control for Demanding Motion
Related Products
-
DEIF CM-2 Control Module – Compact Controller for Generator and Power Management ApplicationsUS$ 3216.00MOQ: 1 Blade -
DEIF DLQ144-PC-NB Multi-Function Controller – Reliable 144 mm Panel Controller for Gensets and SwitchgearUS$ 216.00MOQ: 1 Blade
-
DEIF OPM-1 Operator Panel – A Practical Remote HMI for DEIF Power and Genset ControllersUS$ 1216.00MOQ: 1 Blade
-
DEIF IPM-1 Intelligent Power Manager – Centralised Control for Multi-source Power SystemsUS$ 1216.00MOQ: 1 Blade
-
DEIF DELOMATIC-3 Printed Circuit Board – OEM Spare Board for Marine Power Management and Genset ControlUS$ 1216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock; no more than 1 month at the latest
Payment: 50% advance; full payment before delivery
Express options: FedEx, UPS, DHL
High‑speed digital control – Rapid current and velocity loops for crisp indexing and tight following error in most applications.
Resolver feedback (SRS variant) – Rugged feedback option that performs well in vibration and temperature swings.
Auto‑tuning tools – Speeds commissioning; typically reduces setup time for line upgrades or spares.
Flexible command inputs – Commonly supports ±10 V analog torque/velocity command, step/direction, and discrete I/O for simple PLC integration.
Compact, cabinet‑mount design – Book‑size footprint frees space for additional I/O or safety hardware.
Safe, reliable operation – Standard protective features such as over‑voltage, over‑current, and over‑temperature handling.
Easy configuration – RS‑232 access for parameter setup and diagnostics; no exotic hardware needed.
| Brand / Model | Kollmorgen S20360-SRS |
| HS Code | 8504.40 (Static converters – servo drives) |
| Power Requirements | Typically 100–240 VAC, 50/60 Hz (single/three‑phase depending on configuration) |
| Operating Temperature | 0 to +40°C ambient (common rating; derating may apply near upper limit) |
| Signal I/O Types | ±10 V analog command, step/direction, opto‑isolated digital I/O; resolver feedback (SRS) |
| Communication Interfaces | RS‑232 for setup/diagnostics; discrete I/O for control; series variants support additional fieldbuses |
| Installation Method | Cabinet/panel mount (book‑size); vertical orientation with ventilation clearance |
| Dimensions & Weight | Compact “book” format; typically under ~2 kg (varies by exact build) |
The S20360-SRS is frequently chosen for fast, repetitive moves and reliable torque control in:
Electronics assembly and pick‑and‑place stages
Packaging lines, sealers, and feeders with high starts/stops
Labeling, printing, and converting machinery
Light machine tools, indexing tables, and test rigs
Medical/lab automation where compact drives simplify cabinet layouts
One thing I appreciate is how predictable it behaves with step/direction from a mid‑range PLC—cycle times stay tight even when line speed varies. A customer in food packaging told us their changeovers dropped by roughly 30% after switching to this drive and enabling its auto‑tune routine.
Reliability – Solid protection features and resolver feedback for tough environments.
Compatibility – Works well with Kollmorgen AKM motors and standard PLC command types (±10 V, step/direction).
Cost control – Shorter commissioning times and fewer nuisance trips typically cut downtime and service calls.
Supportability – RS‑232 configuration keeps maintenance straightforward; spares strategy is simple for multi‑line plants.
Panel/cabinet – Install in an IP20 enclosure; allow vertical airflow and reserve space above/below the heat sink fins.
Power & wiring – Use shielded motor and feedback cables; bond shields at the drive. Separate power and signal wiring to reduce EMI.
Grounding – Star‑point protective earth. Check cabinet ground integrity to avoid encoder/resolver noise.
Tuning – Start with auto‑tune, then fine‑trim velocity/position gains at operating load.
Routine maintenance – Quarterly dust removal, connector re‑seating, and parameter backup. Firmware updates when available and validated for your revision.
Safety – Lock‑out/tag‑out before service; verify discharge of DC bus. Observe the manufacturer’s wiring limits for I/O and command signals.
CE compliant
UL/cUL listed (typical for the S200 family)
RoHS compliance for most current builds
Manufacturer warranty applies; our supply carries a 365‑day warranty
Kollmorgen AKM servo motors (torque range to match your axis load and supply)
Motor power and feedback cables matched for resolver signals
Line reactor or EMI filter where plant power quality is variable
Brake resistor if your cycle has frequent decel/stop events
Send Inquiry to This Supplier
You May Also Like
-
DEIF PSM-1 Power Supply Module – Stable DC Backbone for DEIF Controller SystemsUS$ 1216.00MOQ: 1 Blade
-
DEIF SCM-1 Microprocessor-Based Synchronization Control Module – Automatic, Safe Genset-to-bus SynchronizingUS$ 1216.00MOQ: 1 Blade
-
DEIF SCM4.1 Printed Circuit Board – Reliable Replacement PCB for DEIF Control SystemsUS$ 1216.00MOQ: 1 Blade
-
Dialogic DMV2400A-CPCI Digital Media Processing Board – CompactPCI Voice/VoIP Resources for Scalable IVR and TelephonyUS$ 3216.00MOQ: 1 Blade
-
Kongsberg RSER200-4 (603444) High-Accuracy Input Module – Precise 4‑Channel Analog Acquisition for Industrial & Marine ControlUS$ 2216.00MOQ: 1 Blade
-
DIGITAL POWER CPCI-AC-6U-500 (900-7002-99) – 500 W CompactPCI AC Power Supply for 6U SystemsUS$ 2216.00MOQ: 1 Blade
-
LAM Research 810-072906-005 Heavy‑Duty Connector Backplane – Reliable Power and I/O Distribution for Semiconductor ToolsUS$ 4022.00MOQ: 1 Pallet
-
LAM 810-082745-003 Industrial Circuit Board – OEM-grade Replacement for Tool Control and I/OUS$ 4022.00MOQ: 1 Pallet
-
Zygo 1115-801-346 Laser Head Cable – Stable, Low‑Noise Connection for Precision MetrologyUS$ 3475.00MOQ: 1 Pallet
-
Eaton 1785T-PMPP-1700 Operator Interface Module – PanelMate Power Pro HMI for Machine Visualization and ControlUS$ 3216.00MOQ: 1 Blade
