Contact Platform Support
Help CenterALSTOM MVUA11B1BD0784B – Plug‑in Control Module for MVU Rack Systems
Related Products
-
ALSTOM DIAGNOSTICA N897093511D / N897093051D / N897093400H – Diagnostic Interface Modules for Rail Control and Rolling Stock SystemsUS$ 3660.00MOQ: 1 Combo -
ALSTOM N897164611M – Plug-in Control Module for Rolling Stock ElectronicsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM N897163510Q / N897163050Q / N897163100U Modem – Reliable Data Link Modules for Signaling and Industrial ControlUS$ 3660.00MOQ: 1 Combo
-
ALSTOM N897164610L – OEM Control PCB for Rolling Stock Cabinet SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM N897092520B / N897092057Y / N897092500E (TRENO) – Train TCMS I/O and Control Modules for Rolling Stock MaintenanceUS$ 3660.00MOQ: 1 Combo
Warranty: 365 days coverage
Lead time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express delivery: FedEx, UPS, DHL
Functional test and ESD-safe packaging prior to dispatch
MVU-series plug‑in compatibility – Slides straight into the matching Alstom MVU subrack; no external PSU required.
Backplane powered and signaled – Power and I/O are handled through the host backplane, which keeps field wiring untouched.
Service-friendly faceplate – Front handle and captive screws for quick swap during planned outages.
Stable operation in cabinet environments – Typically suited for control-room panels with controlled temperature and ventilation.
Revision-aware replacement – Labeling supports traceability so you can pair the module revision with your installed firmware set.
Factory-grade test before shipping – We bench-check core functions to reduce on-site surprises.
| Brand / Model | ALSTOM / MVUA11B1BD0784B |
| Product Type | Rack plug‑in control module (MVU series) |
| HS Code | 853890 (Parts suitable for apparatus of 8535/8536/8537) |
| Power Requirements | Supplied via host backplane; rack control supply typically DC (commonly 24–48 VDC at system level) |
| Dimensions & Weight | Compact plug‑in module with front faceplate; lightweight board-level assembly suitable for standard control cabinets |
| Operating Temperature | Typically 0 to +55 °C in ventilated cabinet environments |
| Signal I/O Types | Low-voltage logic/analog via backplane; no field power switching on the module face |
| Communication Interfaces | Proprietary MVU backplane interface; external field comms handled at system level |
| Installation Method | Slide-in to Alstom MVU subrack; secure with front screws; ESD-safe handling |
In many cases, the MVUA11B1BD0784B shows up in brownfield projects where the Alstom MVU platform remains central to the process. Typical scenarios include:
Power generation – Turbine or generator control racks using MVU-series electronics.
Substation panels – Legacy protection and control cabinets originally supplied by Alstom.
Rail traction power – MVU-based control equipment in traction substations and wayside cabinets.
OEM equipment – Skids and packaged systems that embedded MVU control modules during original build.
One thing I appreciate is how these modules keep outage windows short—teams can swap the board, run commissioning checks, and restore service without redesigning the panel.
Drop‑in replacement – Maintains wiring and cabinet layout; reduces integration risk.
Lower lifecycle cost – Extends the useful life of existing MVU cabinets without a full platform migration.
Reliability focus – Bench-tested prior to shipment; packaged for shock and ESD protection.
Compatibility support – We help verify revision fit with your installed rack to avoid mismatches.
Logistics you can plan around – Short lead times and major express couriers.
Cabinet environment – Use a clean, dry, ventilated panel (typically 0–55 °C). Avoid condensation and vibration where possible.
Power down – Isolate the rack supply before inserting/removing modules; observe lockout/tagout as per site rules.
ESD handling – Wear a grounded wrist strap; handle by the faceplate and edges only.
Seating – Insert evenly until the backplane connector is fully engaged; fasten the front screws finger‑tight then snug.
Wiring – Field terminations usually remain unchanged because all I/O is on the rack backplane.
Routine care – Periodically clean dust with dry air; inspect connector pins; verify firmware compatibility when swapping revisions; schedule functional checks during outages.
A maintenance manager told us a recent swap “took under 30 minutes from power-down to diagnostic pass,” which seems to be the norm when the rack is in good condition.
Quality & CertificationsCE conformity typical for industrial control equipment of this class
Manufacturing quality systems: ISO 9001 at the original production site
RoHS status may vary by production year for legacy modules
Warranty: 365 days (repair/replace policy)
MVU subrack/backplane assemblies – Host chassis that provide power and signaling to MVU modules.
Rack DC power supplies – System-level DC feeds (commonly 24–48 VDC depending on installation).
Front extraction tools and captive screws – For safe, repeatable module removal and insertion.
Backplane harnessing and ribbon interconnects – Replacement looms if original connectors show wear.
If you can share your rack part number, installed firmware level, or a photo of the nameplate, we can double‑check revision compatibility before you place the order. That small step typically avoids commissioning delays.
Send Inquiry to This Supplier
You May Also Like
-
ALSTOM NRD108028 8RDB43655 SA43655.E – 8‑channel Relay Output Board for Protection and Control SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM NRD108031 / TRVC070999000 – OEM Control Module for Rolling Stock CabinetsUS$ 2660.00MOQ: 1 Combo
-
ALSTOM NRD108033 / 8RDC44667G01 (SA44667.C) – Rack‑Mounted Control/Interface Module for Legacy Alstom SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM POS1846 (TRVC062333000 / CP00000310) – Plug‑in Control Module for Rolling‑Stock SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM NRD109475 / 8RDA44670G01 SA44670.E – Plug‑in Control Board for Legacy ALSTOM Control/Protection SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM NRD108034 / 8RDB44674G01 / SA44674.C – OEM Plug‑in Control/Protection Board for Legacy ALSTOM RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM STO1726KO1 – Industrial Control Board for Drive/Protection InterlocksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM SDK-C0148 12003-101-01 (SBS05M09B) – Plug‑in Control Board for Rail and Industrial Automation RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM SDK-C0167-1 12004-08-01 SBS07M076B – Plug‑in Control Board for Rail Signaling and Industrial CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM TRVC062105000 / TRVC070938000 / TRVC070938005.A – TRVC-Series Control Modules for Railway and Industrial Control RacksUS$ 3660.00MOQ: 1 Combo
