Contact Platform Support
Help CenterALSTOM STO1726KO1 – Industrial Control Board for Drive/Protection Interlocks
Related Products
-
ALSTOM SDK-C0148 12003-101-01 (SBS05M09B) – Plug‑in Control Board for Rail and Industrial Automation RacksUS$ 3660.00MOQ: 1 Combo -
ALSTOM SDK-C0167-1 12004-08-01 SBS07M076B – Plug‑in Control Board for Rail Signaling and Industrial CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM TRVC062105000 / TRVC070938000 / TRVC070938005.A – TRVC-Series Control Modules for Railway and Industrial Control RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM SDK-C0147 12004-101-00 (SBS04M17C) – Rail Signaling Control Module for Interlocking CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM VAJX11BP5243BA – High‑speed Auxiliary/Trip Relay for Protection PanelsUS$ 3660.00MOQ: 1 Combo
Warranty: 365 days
Delivery: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
Drop‑in replacement for ALSTOM platforms – Typically installs without rewiring; designed for the original rack/backplane.
Backplane‑powered design – No external power feed; simplifies service and reduces wiring faults.
Interlock/safety signal handling – Commonly used in stop chains, permissive logic, and torque inhibiting paths in drive cabinets.
Rugged industrial build – Components and layout aimed at stable operation in plant environments with electrical noise.
Service-friendly – Quick card extraction and reseat for troubleshooting; supports rapid MRO workflows.
Proven field reliability – In many cases, runs for years with minimal adjustment once commissioned.
| Brand / Model | ALSTOM STO1726KO1 |
| HS Code | 8538.90 (Parts suitable for electrical control panels/apparatus) |
| Power Requirements | Backplane supplied, low‑voltage logic power (no external feed required) |
| Operating Temperature | Typical industrial ambient 0–55°C (application dependent) |
| Signal Input/Output Types | Discrete logic and interlock signals; opto‑isolated paths are commonly used in this series |
| Communication Interfaces | Not a fieldbus device; interfaces via the host backplane and hardwired I/O |
| Installation Method | Plug‑in PCB card for ALSTOM rack/backplane, front service access |
You’ll typically find the STO1726KO1 in medium‑voltage drives and high‑power motion systems where reliable stop/permissive logic matters. Common deployments include:
Steel and metals rolling lines (line drives, coilers, and auxiliary motors)
Power generation auxiliaries and excitation-related cabinets
Oil & gas compressors and pump trains using ALSTOM/Converteam drives
Marine propulsion and thruster control cabinets
Test benches and large industrial OEM machinery retrofits
Continuity with existing systems – Keeps legacy ALSTOM platforms running without PLC requalification, which in many cases saves weeks of engineering.
Lower risk commissioning – Backplane pinout and logic behavior match the installed base, reducing unexpected interlock trips.
Downtime reduction – Card‑level swap means faster MTTR; maintenance teams can validate with simple interlock tests.
Cost control – More economical than a full drive upgrade while preserving safety/permissive functionality.
Technical support – Guidance on compatibility and pre‑ship testing helps avoid second visits onsite.
A maintenance engineer from a metals plant shared that swapping to an STO1726KO1 restored a stubborn permissive chain in under an hour—no PLC edits, just reseat, verify LEDs, and re‑energize. That’s typically what teams want on a Friday night call‑out.
Installation & MaintenanceCabinet & environment – Install in a clean, dry control cabinet (IP54 or better is common). Maintain clearance for airflow and avoid mounting near high‑heat sources.
ESD and handling – Use ESD protection; handle by edges. Inspect the edge connector and backplane fingers for debris before insertion.
Wiring & interlocks – Verify all hardwired permissives and safety loops are de‑energized before work. Label and check any terminal blocks associated with the interlock chain.
Commissioning checks – After seating the board, run the standard interlock test routine: permissive chain continuity, emergency stop validation, and safe torque inhibit verification.
Routine maintenance – Quarterly visual inspection for discoloration or loosened card guides; light dust removal with dry, oil‑free air; tighten ground points. Firmware updates are typically not applicable to this card type.
Safety note: lock‑out/tag‑out procedures should be followed. For MV drives, discharge confirmation and cabinet earth verification are essential prior to card handling.
Quality & CertificationsQuality control – Each unit is inspected and electrically tested prior to shipment.
Certifications – Typically supplied as part of CE‑marked drive systems; RoHS/UL status can vary by production batch and era. Documentation can be provided case‑by‑case.
Warranty – 365‑day warranty coverage.
To help verify fit and compatibility, share the host drive model, cabinet tag, and any nearby card part numbers. If your documentation lists STO1726K01 or STO1726KO1, we can cross‑check revisions against your installed backplane before shipping. Lead times are kept tight—1 week when in stock, and not more than one month latest.
Send Inquiry to This Supplier
You May Also Like
-
ALSTOM VPS 12004-102-03 V1.0.0 – OEM Module for ALSTOM Control and Signaling SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM VOOB8-B 12004-106-04 (VER V1.0.0) – Digital Output Module for Railway Signaling RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM VIIB16-C 12011-105-00 V1.0.0 – 16‑channel Isolated Input Module for Industrial and Rail Control RacksUS$ 3660.00MOQ: 1 Combo
-
Alstom EPSD-0603 – Rack Power/Signal Distribution Module for Industrial Control SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM AL129A – Industrial Control Module for Signaling and Plant AutomationUS$ 3661.00MOQ: 1 Pallet
-
ALSTOM CMP1838 (TRVCO62345000 / CP00005202) – Plug‑in Control Module for Legacy ALSTOM RacksUS$ 4203.00MOQ: 1 Pallet
-
ALSTOM PIB1201A 3BEC0067 Interface Board With High ReliabilityUS$ 1122.00MOQ: 1 Pallet
-
ALSTOM PIB100G 3BEE0226 Power Interface Board Easy to MaintainUS$ 1119.00MOQ: 1 Pallet
-
ALSTOM 12004-102-01 – Plug-in Control Board for Legacy Protection & Automation SystemsUS$ 3265.00MOQ: 1 Pallet
-
ALSTOM--V0701596-001102- Programmable Logic Controller Digital Arithmetic Controller for Automatic ControlUS$ 1620.00MOQ: 1 Pallet
