Home > Products > Test Machine > IEC UL Safety Standard Battery Needle Test Lab Battery Acupuncture Testing Machine
IEC UL Safety Standard Battery Needle Test Lab Battery Acupuncture Testing Machine
Negotiable
/ Unit
1 Unit(Min.Order)
- 0 Unit / Units per Month
- Shenzhen
- T/T L/C PayPal D/P Western Union
You May Like
-
China Sand and Dust Test Chamber for IEC-529 Dustproof Test
-
China Factory 2-Zone High and Low Thermal Shock Test Chamber
-
Small Size Desk-Top Thermostat Constant Temp and Humidity Climate Test Chamber
-
Ipx3 Ipx4 Raining Water-Proof Test Programmable Rain Test Chamber
-
China Factory Ipx5 Ipx6 Sealing Test Sand and Dust Test Chamber
-
Customized Size Sand and Dust Test Chamber for Sealing Effect Ipx5 Ipx6standard
Product Details
| Warranty | 1 Year | Transport Package | Wooden Case | |
| Origin | China |
Product Description
Battery Acupuncture Testing Machine
Meeting standard:
1. GB/T 31485-2015 "Safety Requirements and Test Methods for Traction Batteries for Electric Vehicles"
2. GB/T 31241-2014 "Safety Requirements for Lithium-ion Batteries and Battery Packs for Portable Electronic Products"
3. UN38.3 "United Nations Manual of Tests and Standards for the Transport of Dangerous Goods"
4. IEC62133 "Battery (pack) composed of cells and safety requirements for portable devices"
5. UL1642:2012 "Lithium Battery Standard"
6. QC/T743-201X "Lithium-ion Batteries for Electric Vehicles"
7. GB/T 8897.4-2008 "Safety Requirements for Lithium Batteries Part 4 of Primary Batteries"
8. GB/T 21966-2008 "Safety Requirements for Lithium Primary Batteries and Storage Batteries in Transportation"
9. YD 1268-2003 "Safety Requirements and Test Methods for Lithium Batteries and Chargers of Mobile Communication Handsets"
10. GB/T 19521.11-2005 "Safety Code for Inspection of Hazardous Properties of Lithium Battery Pack Dangerous Goods"
11. YDB 032-2009 "Backup Lithium-ion Battery Pack for Communications"
12. UL 1642:2012 "Lithium Battery Standard"
13. UL 2054: 2012 "Household and Commercial Battery Packs"
14. IEC 62281: 2004 "Safety Requirements for Lithium Primary Batteries and Storage Batteries in Transport"
Application: This machine is suitable for simulating the situation that various batteries are subjected to objects when they are used, transported, stored or disposed of household waste. The battery is qualified if it does not explode or catch fire. ;
Principle: The test should be carried out at an ambient temperature of 20°C to 5°C. Place the battery connected (the contact of the thermal couple is fixed on the large surface of the battery) in a fume hood, and use a 3mm straight shank non-corrosion steel needle with a 10mm The speed of /s-40mm/s pierces the center of the largest surface of the battery.
Features
1, Exhaust system:
The motor drives the aluminum alloy fan blades, which can discharge the exhaust gas generated by the test to the outside at any time;
2, Air pressure balance system:
double holes to make up the air to ensure the air pressure balance in the test chamber;
3, Safety system:
(1) Stainless steel hinges, tightly fastened to the door lock, to ensure that the door will not be flushed open during strong airflow;
(2) The rear wall of the cabinet adopts a door-type structure, one side is hinged, and the other side is pressed tightly by a strong magnet. When there is a strong airflow impact, the rear cover can be opened automatically to reduce the impact of the explosion;
4, Humanized design:
(1) Double-layer tempered glass window, to ensure safety and at the same time testers can observe the test status through the window;
(2) The built-in environmental protection and energy-saving lamp illuminates the entire test space, which is convenient for clear observation.
Specification:
Meeting standard:
1. GB/T 31485-2015 "Safety Requirements and Test Methods for Traction Batteries for Electric Vehicles"
2. GB/T 31241-2014 "Safety Requirements for Lithium-ion Batteries and Battery Packs for Portable Electronic Products"
3. UN38.3 "United Nations Manual of Tests and Standards for the Transport of Dangerous Goods"
4. IEC62133 "Battery (pack) composed of cells and safety requirements for portable devices"
5. UL1642:2012 "Lithium Battery Standard"
6. QC/T743-201X "Lithium-ion Batteries for Electric Vehicles"
7. GB/T 8897.4-2008 "Safety Requirements for Lithium Batteries Part 4 of Primary Batteries"
8. GB/T 21966-2008 "Safety Requirements for Lithium Primary Batteries and Storage Batteries in Transportation"
9. YD 1268-2003 "Safety Requirements and Test Methods for Lithium Batteries and Chargers of Mobile Communication Handsets"
10. GB/T 19521.11-2005 "Safety Code for Inspection of Hazardous Properties of Lithium Battery Pack Dangerous Goods"
11. YDB 032-2009 "Backup Lithium-ion Battery Pack for Communications"
12. UL 1642:2012 "Lithium Battery Standard"
13. UL 2054: 2012 "Household and Commercial Battery Packs"
14. IEC 62281: 2004 "Safety Requirements for Lithium Primary Batteries and Storage Batteries in Transport"
Application: This machine is suitable for simulating the situation that various batteries are subjected to objects when they are used, transported, stored or disposed of household waste. The battery is qualified if it does not explode or catch fire. ;
Principle: The test should be carried out at an ambient temperature of 20°C to 5°C. Place the battery connected (the contact of the thermal couple is fixed on the large surface of the battery) in a fume hood, and use a 3mm straight shank non-corrosion steel needle with a 10mm The speed of /s-40mm/s pierces the center of the largest surface of the battery.
Features
1, Exhaust system:
The motor drives the aluminum alloy fan blades, which can discharge the exhaust gas generated by the test to the outside at any time;
2, Air pressure balance system:
double holes to make up the air to ensure the air pressure balance in the test chamber;
3, Safety system:
(1) Stainless steel hinges, tightly fastened to the door lock, to ensure that the door will not be flushed open during strong airflow;
(2) The rear wall of the cabinet adopts a door-type structure, one side is hinged, and the other side is pressed tightly by a strong magnet. When there is a strong airflow impact, the rear cover can be opened automatically to reduce the impact of the explosion;
4, Humanized design:
(1) Double-layer tempered glass window, to ensure safety and at the same time testers can observe the test status through the window;
(2) The built-in environmental protection and energy-saving lamp illuminates the entire test space, which is convenient for clear observation.
Specification:
Contact Us
- Dongguan Zhongrui Insulation Material Co., Ltd.
- Contact nameX Chat Now
- Addressliaobu, Dongguan, Guangdong
Product Categories
| Test Machine | Industrial-Automation |
New Products
-
Leadshine 2 phase Close-loop stepper motor driver CL86C
-
Leadshine DM542 Stepping Motor Drive 2 Phase 57 Stepper Motor Driver DM542J
-
Leadshine 20-50VAC 2 Phase Step Motor Drive DM556/DM556J
-
Leadshine DM870 stepper motor driver Control 86 Standard Stepper Drive
-
Leadshine DMA860H or DMA882S Intelligent Stepper Driver 20-80VAC/36-110VDC
-
Leadshine driver DM2282 digital stepper driver 2.2~8.2A work 80~220VAC
-
Leadshine 3DM2283 Stepping Motor 220 volt ac stepper motor controller
-
Delta Temperature Controller DTE10T multi-channel 4 input
-
LED Display Power Supply A-300AR-5 ChuangLian Power Supply
-
Original Delta PLC AS Module AS228T-A Programmable Logical Controller
-
LED Display Power Supply A-300AB-5 ChuangLian Power Supply
-
Switching Power Supply A-300FAY Led Display Power Supply
-
Lab Anti-Rust Anti-Corrosion Slat Spray Test Machine 100L-500L
-
Ipx5 and Ipx6 Anti-Dust Sealing Performance Test Chamber
-
Transportation Fall off Packing Test Drop Test Machine 100kg
-
Constant Temp/Humidity Storage Cabinet for Precious High Value Painting
-
120cm*100cm 100kg Vibration Simulating Test Bench
-
Packing Transportation Movement Vibration Simulator Test Bench
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- spring fatigue testing machine manufacturers Spring fatigue testing machine suppliers OEM spring fatigue tester
- Custom spring fatigue endurance tester Buy spring fatigue testing machine Spring fatigue tester price list
- High-temperature spring fatigue testing machine Spring fatigue test machine with force measurement Multi-station spring fatigue testing system
- DIN 50100 spring endurance tester JIS B 2704 spring fatigue testing machine Spring fatigue tester with environmental chamber
- Computer-controlled spring fatigue tester ISO 12106 spring fatigue testing machine ASTM E606 spring fatigue test equipment
- Spring fatigue test machine with load cell Spring fatigue tester with digital readout Automatic spring cycle testing machine
- High-frequency spring fatigue tester Programmable spring fatigue testing machine Servo-controlled spring fatigue tester
- Small spring fatigue tester Medical device spring endurance tester Electronics spring fatigue testing machine
- Tension spring fatigue test equipment Heavy-duty spring fatigue tester Industrial spring cycle testing machine
- Aerospace spring fatigue testing machine Compression spring fatigue tester Torsion spring fatigue testing machine
- Suspension spring fatigue testing machine Coil spring endurance tester (automotive) Clutch spring fatigue test equipment
- Spring load cycle tester Spring fatigue resistance tester Valve spring fatigue tester
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
Product Tags:
Dongguan Zhongrui Insulation Material Co., Ltd.
Business license
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Dongguan Zhongrui Insulation Material Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
X
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile