Contact Platform Support
Help CenterLork Uns N02201/ASTM B162/DIN 17740 Nickel Plate Purity Nickel 201 Alloy Sheet
Related Products
-
Lork Spot Goods Uns N06200/ASTM B462 Nickel Alloy Bar Hastelloy C2000 Nickel RodUS$ 28 - 30MOQ: 100 Kilograms -
Lork Uns N07750/ASTM B637 Nickel Alloy Rod Inconel X750 Nickel BarUS$ 28 - 30MOQ: 100 Kilograms
-
Lork Custom AMS 5844/Uns R30035 Cobalt Rod for Aircraft Engine Fasteners MP35n Cobalt Alloy BarUS$ 45 - 50MOQ: 100 Kilograms
-
Lork Uns R31537/ASTM F1537 Cocrmo Cobalt Alloy Rod Medical Materials Cobalt-28 Chromium-6 Molybdenum Cobalt BarUS$ 45 - 50MOQ: 100 Kilograms
-
Lork ASTM B348/ASTM F136/Uns R56401 Titanium Rod for Medical Implants Ti-6al-4V Titanium Alloy BarUS$ 30MOQ: 100 Kilograms
Lork Group All Categories
Lork Group Nickel 201 Introduction
LORK is a super alloy manufacturer with 20 years of manufacturing experience.
Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.
It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution.
Both Nickel 200 and 201 offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. This oxide film accounts for the materials excellent resistance in caustic environments. Corrosion rates in both marine and rural atmospheres are very low. The resistance of Nickel 200/201 to corrosion by distilled and natural waters is excellent. Plus it also gives excellent service in flowing sea water even at high velocity, but in stagnant or very low-velocity sea water severe local attack may occur under fouling organisms or other deposits. In hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates will be initially high but will decrease with time if conditions favor the formation of a protective film.Nickel 200 is normally limited to service at temperatures below 600° F. At higher temperatures Nickel 200 products can suffer from graphitization which can result in severely compromised properties. When operating temperatures are expected to exceed 600° F, carbon content becomes critical. The lower carbon content of Nickel 201 makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel 200 & 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 is approved for service up to 600° F while Nickel 201 is approved for service up to 1230° F. Melting point is 2615-2635° F.
Nickel 201 Alloy Applications
▪ Highly resistant to various reducing chemicals
▪ Excellent resistance to caustic alkalies
▪ High electrical conductivity
▪ Excellent corrosion resistance to distilled and natural waters
▪ Resistance to neutral and alkaline salt solutions
▪ Excellent resistance to dry fluorine
▪ Widely used to handle caustic soda
▪ Good thermal, electrical and magnetostrictive properties
▪ Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrationsOffers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations
Lork Group Detection
Lork Group Company Introduction
Lork Group RFQ
Send Inquiry to This Supplier
You May Also Like
-
Nickel 201 (Alloy 201/N02201) Nickel Alloy Plate and Sheet High Corrosion ResistanceNegotiableMOQ: 1 Ton
-
Nickel 201/Nickel 200/N02200/N02201/N4 Nickel Alloy Rod/Bar Pure Nickel AlloyUS$ 10000 - 40000MOQ: 1 Ton
-
Nickel 201 UNS N02201 Plate/Bar/Wire/Pipe/Pipe Fittings/Forging, In Stock & Customized ServiceUS$ 40 - 80MOQ: 10 Kilograms
-
Nickel 201NegotiableMOQ: 1 Kiloohm
-
Nickel 200, Nickel 201US$ 25 - 30MOQ: 50 Kilograms
-
Nickel 201 Nickel ReducerUS$ 1 - 100MOQ: 10 Pieces
-
Nickel 201 PlateUS$ 10 - 50MOQ: 10 Kilograms
-
Nickel 201 WireUS$ 10 - 15MOQ: 50 Kilograms
-
Nickel 201 StripNegotiableMOQ: 50 Kilograms
-
ASTM B163 Nickel 201 Nickel TubeUS$ 800 - 1,500MOQ: 1 Ton
