Contact Platform Support
Help CenterHigh Quality Customized TP304 Tp316 Tp347 Stainless Steel Seamless Tubing Smls Pipe Tube
Related Products
-
Incoloy No8367 N08810 N08800 N08811 N08020 N08825 N08028 N09901 N09925 Austenitic Nickel Alloy Stainless Steel Rod Bar and TubeUS$ 500 - 1500MOQ: 1 Ton -
S31600/1.4401 Seamless Stainless Steel Round Pipe Tube for Pickled SurfaceUS$ 1500MOQ: 1 Ton
-
High Strength Conductive Nickel Bars for Chemical Electronic Electroplating Industries in StockUS$ 500 - 1500MOQ: 1 Ton
-
Incoloy 800/N08800 800h/N08810 800ht/N08811 Incoloy Alloy WireUS$ 30 - 60MOQ: 1 Kilogram
-
Astmb407 Uns N08800/N08810/N08811 Nickel Alloy Steel Seamless PipeUS$ 40 - 60MOQ: 500 Kilograms
| Name | stainless steel pipe/stainless steel tube |
| Outer Diameter | Seamless Pipe: 4mm-812.80mm |
| Welded Pipe: single slit(Φ8mm-Φ630mm); girth(Φ630mm-Φ3000mm), | |
| Thickness | Seamless Pipe: 0.5mm - 60mm |
| Welded Pipe: single slit(0.5mm-25mm);girth(3mm-45mm) | |
| Length | 5.8-6.1 m or as customers' request |
| Tolerance | According to the Standard. |
| Surface | 180G, 320G, 400G Satin / Hairline |
| 400G, 500G, 600G or 800G Mirror finish | |
| Test | UT, ET, HT, RT,ect, and others according to the standard,or as the requests of the customers |
| Certificate | ISO9001-2008,ASME, PED |
| Delivery Time | 7-30 Days, Depends on quantity |
| Standard | ASTM A213/A312/A376/A279 /A789/A790/A450/A999ETC |
| Grade | TP 304,TP304L,TP316/316L/316TI |
| TP 309S,310S | |
| TP 347/347H,TP321/321H | |
| TP904L | |
| S31803,S32205,S32304,S32750 | |
| SAF2205,SAF2304,SAF2507 | |
| MOQ | 1 PCS |
| Manfacturing Method | Cold Drawing/Welding/Cold rolled |
| Outside Diameter Range | 6mm-508mm |
| Wall Thickness Range | 1mm-40mm |
| Length Range | 1M-12M |
| Pipe end | BE/PE |
| Chemical Composition and Mechanical Property | ||||||||||||||
| Chemical components | Mechanical Property | |||||||||||||
| Grade | C | Mn | P | S | Si | Cr | Ni | Yield | Tensile | Elongation | ||||
| Strength | strength | |||||||||||||
| (MPa) | (MPa) | % | ||||||||||||
| Max. | Max. | Max. | Max. | Max. | Min. | Max. | Min. | Max. | Max. | Min. | Max. | Min. | Min | |
| TP 304 | 0.08 | 2.00 | 0.05 | 0.03 | 1.00 | 18.00 | 20.00 | 8.00 | 11.0. | 540 | 515 | 240 | 205 | 35 |
| TP 304L | 0.04 | 2.00 | 0.05 | 0.03 | 1.00 | 18.00 | 20.00 | 8.00 | 12.00 | 485 | 170 | 35 | ||
| TP 309S | 0.08 | 2.00 | 0.05 | 0.03 | 1.00 | 22.00 | 24.00 | 12.00 | 15.00 | 600 | 515 | 310 | 205 | 35 |
| TP 310S | 0.08 | 2.00 | 0.05 | 0.03 | 1.00 | 24.00 | 26.00 | 19.00 | 22.00 | 515 | 205 | 35 | ||
| TP 316 | 0.08 | 2.00 | 0.05 | 0.03 | 1.00 | 16.00 | 18.00 | 10.00 | 14.00 | 515 | 450 | 205 | 200 | 35 |
| TP 316L | 0.04 | 2.00 | 0.05 | 0.03 | 1.00 | 16.00 | 18.00 | 10.00 | 14.00 | 485 | 170 | 35 | ||
Dimension Tolerance
| Permitted Variations in Wall Thickness | ||||||||
| Wall Thickness % | ||||||||
| Outside Diameter in. (mm) | 0.095(2.4) and under | Over 0.095 to 0.150 (2.4 to 3.8) incl | Over 0.150 to 0.0180 (3.8 to 4.6) incl | Over 0.180 (4.6) | ||||
| Over | Under | Over | Under | Over | Under | Over | Under | |
| Seamless, Hot-Finished Tubes | ||||||||
| 4(100)and under | 40 | 0 | 35 | 0 | 33 | 0 | 28 | 0 |
| Over 4(100) | 35 | 0 | 33 | 0 | 28 | 0 | ||
| Seamless, Cold-Finished Tubes | ||||||||
| Over | Under | |||||||
| 1½ (38.1) and under | 20 | 0 | ||||||
| Over 1½ (38.1) | 22 | 0 | ||||||
| Welded Tubes | ||||||||
| All sizes | 18 | 0 | ||||||
| Permitted Variations in Outside Diameter | ||
| Specified Outside Diameter | Permitted Variations in (mm) | |
| in(mm) | Over | Under |
| Hot-Finished Seamless Tubes | ||
| 4(100) or under | 1/64 (0.4) | 1/32 (0.8) |
| Over 4 to 7 ½ (100 to 200) incl | 1/64 (0.4) | 3/64 (1.2) |
| Over 7 ½ to 9 (200 to 225) incl | 1/64 (0.4) | 1/16 (1.6) |
| Welded Tubes and Cold-Finished Seamless Tubes | ||
| Under 1(25) | 0.004 (0.1) | 0.004 (0.1) |
| 1 to 1½ (25 to 40) incl | 0.006 (0.15) | 0.006 (0.15) |
| Over 1½ to 2 (40 to 50) excl | 0.008 (0.2) | 0.008 (0.2) |
| 2 to 2½ (50 to 65) excl | 0.010 (0.25) | 0.010 (0.25) |
| 2½ to 3 (65 to 75) excl | 0.012 (0.3) | 0.012 (0.3) |
| 3 to 4 (75 to 100) incl | 0.015 (0.38) | 0.015 (0.38) |
| Over 4 to 7 ½ (100 to 200) incl | 0.015 (0.38) | 0.025 (0.64) |
| Over 7 ½ to 9 (200 to 225) incl | 0.015 (0.38) | 0..045 (1.14) |
ASTM A358 / ASME SA358 Stainless Steel EFW Pipes
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A358 Stainless Steel EFW Pipes specification covers electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for corrosive or high-temperature service, or both, or for general applications.
The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter," "size," and "nominal size."
This specification covers the grades of alloy and stainless steel listed in Table 1. The selection of the proper grade and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.
Five classes of pipe are covered as follows:
ASTM A358 Class 1 - Pipe shall be double welded by processes employing filler metal in all passes and shall be completely radiographed.
ASTM A358 Class 2 - Pipe shall be double welded by processes employing filler metal in all passes. No radiography is required.
ASTM A358 Class 3 - Pipe shall be single welded by processes employing filler metal in all passes and shall be completely radiographed.
ASTM A358 Class 4 - Same as Class 3 except that the weld pass exposed to the inside pipe surface may be made without the addition of filler metal (see 6.2.2.1 and 6.2.2.2).
ASTM A358 Class 5 - Pipe shall be double welded by processes employing filler metal in all passes and shall be spot radiographed.
Supplementary requirements covering provisions ranging from additional testing to formalized procedures for manufacturing practice are provided. Supplementary Requirements S1 through S6 are included as options to be specified when desired.
The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
304H stainless steel (UNS S30409) Grade 304 is the standard "18/8" stainless" it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. for these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures
duct Show
Application Area
High Quality Control Process
Product Application
Quality Control
Packing+Delivery
Send Inquiry to This Supplier
You May Also Like
-
Oxidation-Inhibiting-Coated API 5CT,ASTM A335,A213,En 10216-2 Seamless Steel Tubes for Petroleum Cracking P5,P11,P120s,Uns N08810US$ 500 - 600MOQ: 1500 Tons
-
Manufactur High Quality ASTM Tube Plate Coil 316 304L 310S Round Welded Seamless Stainless Steel Pipe Coil Steel Products Boiler TubeUS$ 800 - 1100MOQ: 1 Ton
-
ASTM B407 Uns N08810 Alloy 800 Nickel Alloy Seamless Tube ABS ApprovedUS$ 600 - 1000MOQ: 1 Ton
-
Professional Supplier of Precision Cold Rolled Stainless Steel Pipe Hastelloy B3 N10675 Hastelloy C 276 N10276 Nickel Base Alloy Seamless TubeUS$ 800 - 1100MOQ: 1 Ton
-
304/L/H/Ln 316L/H/Ln/Ti Super Austenitic Stainless Steel Seamless PipeUS$ 600 - 1000MOQ: 1 Ton
-
ASTM A312m Hot Rolled S31803 DN80 Sch40 Heat Exchanger Pipe 304L Super Duplex 310S 309S 2507 Square/Round Tubes321 Stainless Steel Pipes PriceUS$ 1000 - 1300MOQ: 1 Ton
-
Super Duplex 2507 Pipe and ASTM A790 S32750 Seamless Stainless Steel Pipe for Oil and Gas IndustryUS$ 6000 - 13000MOQ: 1 Ton
-
Flawless ASTM B167,ASTM B407,ASTM B423 Special Alloy Seamless Pipe Uns N06617,N08120,N08800,N08810,N08811,N08801,N08890,N06811,N08825,N08221,N06845US$ 600 - 1300MOQ: 1 Ton
-
Uns Incoloy 800h N08811 Incoloy 825 N08825 N08810 Nickel Alloy Stainless Steel Seamless Pipe Steel PipeUS$ 20 - 50MOQ: 300 Kilograms
-
Hot Rolled and Cold Drawn N08810 N6022 ASTM A335/A213/A333 Seamless Alloy Steel Pipe and TubeUS$ 7 - 50MOQ: 1 Kilogram
