YJP Series Water Fuel Heater

This fuel water heater is used for preheating and auxiliary starting of passenger car engines in low temperature environments, and also provides a heat source for the vehicle's heating and defrosting system.

Rapid ignition <5 seconds, combustion noise <68dB;

More secure and reliable control, temperature sensor and overheat sensor synchronization monitoring.

·Whole process detection after start-up, with humanization design and indicator light flashing indicator will indicate the working condition of the heater.

.The optimum oil and air mixture ratio can be guaranteed within the working voltage range, and combustion efficiency can be up to 80%. More electricity-saving when the heater is started, where the power consumption of the ignition device is only 1/20 of the power consumption of the glow plug ignition structure, which greatly reduces the battery burden;

The heater adopts double preheating (preheating nozzle, preheating filter) structure to ensure the success of the next ignition at low temperature.

Electric water pump can be used for the heater, and the service life of the water pump is ≥20000 hours.. Heater’s fuel inlet pipe can use 15 m or longer tubing.

Such electric injection series heaters are widely used in all kinds of high-grade buses, engineering machinery and military equipment..The exhaust gas emission of the heater meets the national VI standard. The heater meets the requirements of EMC GB18655 GRADE III.·E-MARK certified.